Search results

  1. rawr

    Nhaler Announces, The Kick by EVOLV!!!

    What about more powerful kick3? Any news about evolv 2014 products?
  2. rawr

    Advise for mechanical mod

    Protected batteries are good for vv/vw mods like svd, vamo, legend, evic... because of the circuit board inside ans also for flashlights. I dont think that there are any protected IMR high drain batteries. Simply because of the new cells with safer chemistry (Li-mn) and normal working order...
  3. rawr

    Advise for mechanical mod

    Exactly. :) Better charger also means safer charging and longer life of battery cells. Very important is also that you have an ohmmeter to check the resistance after build the coil. Omni tester by smok is good, because you can also check voltage drop of the battery to see how good it conduct...
  4. rawr

    Advise for mechanical mod

    For mechanical i would choose nemesis, stingray or similar silver plated, fully adjustable mech. Then kayfun lite+ v2 and some organic cotton and 28awg kanthal a1. 1. Mechs are usable up to 1.5ohm without kick module. Over 1.5ohm they dont provide enough power. Simple as that. 2. Kayfun lite+...
  5. rawr

    Bored of my KFL & 3.1.... looking for a new RBA.

    Aqua rta, on fasttech for 15.5$ excellent clone! If you can build coils then you wont be disappointed a bit ;) Except of small tank, that thing is a killer in flavor and also vapor and because of dual coils is really thirsty! You forget about that when you vape on it! Leads of the...
  6. rawr

    What are you vaping on...RIGHT NOW!

    Stingray with magma at 0.55ohm with diy tahiti vanilla from flavourart. :vapor:
  7. rawr

    When upgrading, what really matters??

    Atomizer with good build is the most important part of ecig/medical vaporizer imo :), then juice of course and last the battery. Kayfun lite+ v2 clone ;)
  8. rawr

    Erlkonigin!

    Obviously the center pin doesnt make contact. Try on different battery/mech/vv mod. Dunno if provari has floating pin, i guess not. Also waiting for clone :)
  9. rawr

    new to e cig, pls help which one to buy

    Welcome to the Club of Vaping :) I would say that you just think that you want red marlboro flavor, but i am sure you are gonna love fruit flavor much much better. Try some in local vape shop. I dont know how many are there in Canada. Really good starter kit and also good backup is ego...
  10. rawr

    New aqua tank build suggestions

    My aqua leaks only when overfilled!Airflow holes are fully open all the time and i take origin 18490+aqua in hybrid every where i go in my left pocket. No problems whatsoever. Problem is you build for sure! Aqua really is the beast! My favourite rta. Only con for me is juice capacity. 2.2-3mls...
  11. rawr

    Huge batches of DIY

    If i see right, you did your juice with 30% aroma? oO How can you vape that? What atomizer do you use? On my magma rda or aqua rta i cant vape strawberry or coconut TFA at 15% because its too sweet, too full of flavor and makes me "sick" after few drags. On kayfun 3.1 is fine. But 30% is a whole...
  12. rawr

    Huge batches of DIY

    So true. Its cheap, its good, always in stock:) and you know exactly whats in it! I also make pg/vg/nic base with milk whisker. Around 200ml and i have it in a bottle with dripper. When i mix new juice, i just pour the base in smaller bottles and add aromas. I store bottles in a box and i give...
  13. rawr

    Cellucotoon (Rayon) wicks

    Interesting. I just bought some cellucotton on ebay uk :) and when i get it i will report about it. I am using organic cotton at the moment and its ok. If the CC is really that good at producing flavor, i guess i am gonna have to make diy juice with less aroma lol
  14. rawr

    I Just Can't Make My Own Coils

    If the wraps touch each other then the coil is slightly shorter then coil where is space between wraps. More wire used, more resistance, so the larger diameter coil will have more resistance at the end. As you see 5 wraps on 3mm gives you almost the same resistance as 7 wraps on 2mm bit with...
  15. rawr

    I Just Can't Make My Own Coils

    Most important is that you choose right gauge/awg/thickens of the wire, to build right amount of wraps to get appropriate resistance! 1. Coil with many wraps will heat up slower, coil with less wraps will heat up quickly 2. Thicker wire = less resistance , thinner wire = more resistance 3. For...
  16. rawr

    I Just Can't Make My Own Coils

    For kayfun i am using 3mm coil with 5 wraps of 28 awg kanthal. Gives about 1.55 ohm-spot on for using with kick clone. I wrap the coil leads once around the screws and then tighten them down. Then i lift the coil about 3-4mm of the air hole.
  17. rawr

    RDA with biggest e-liquid well?

    Why well and not wall? :) btw I love my magma :vapor:
  18. rawr

    Recommended RBAs for beginner?

    Kayfun 3.1 or lite+ v2 quality clone. :2c:
  19. rawr

    How many vapes do you own?

    I have 3 mechs and 4 rbas which i use daily! Nemesis with kayfun and aqua with origin are solid hybrid units, but on stingray i switch between tobh and magma. :vapor:
  20. rawr

    Best setup for highest amount of vapor with minimal TH

    Throathit is correlated with PG and amount og nicotine. 70:30 for Vg and 0-6mg/ml nicotine should do it ;)
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu