Search results

  1. SilverZero

    AGA-T2 issue with center pin

    That's good to know. I have a feeling I won't be using it all that much to be honest; it was a package deal with the EA mod and for $10 more it didn't seem to make much sense at the time to pass on purchasing the AGA with it. At least it helped me get a handle on using SS mesh and building...
  2. SilverZero

    AGA-T2 issue with center pin

    That's what I was hoping to do, but now that I think about it I can barely get all three nuts locked down on the top of the pin as it is. Moving the bottom of the pin down any farther might end up opening up a different can of worms. Thanks though.
  3. SilverZero

    AGA-T2 issue with center pin

    Damn, I was hoping I could buy a washer that was the same width of the 510 threads on the AGA and call it a day. So much for that. After paying $10 for my AGA-T2 I think I'll rebuild the coil to achieve a higher resistance and reserve it for use on my VAMO V3. At least with that setup I can...
  4. SilverZero

    Regular Atty Drippers (A Dying Breed?)

    I haven't had that happen with a brand new 510 atty, but one of mine started doing that after a few months of use. I knew something was wrong when I fired it and the noise it made was much louder than it was the day before. That one ended up in a shallow unmarked grave. RIP.
  5. SilverZero

    Micro Coils to increase Vapor, flavor & TH

    Are you dripping to much eliquid in it? On my IGO-L if I over drip there will be juice puddled under the coil where I don't have any cotton and when I fire it that juice tends to sputter and spit.
  6. SilverZero

    AGA-T2 issue with center pin

    Hi everyone, I'm wondering if any other AGA-T users have some suggestions. I recently purchased a slightly used AGA-T2 and built my first ever SS wick and coil for it yesterday. It took a while to get the hot spots out but it's working like a champ (aside from a lack of flavor, but I'm hoping as...
  7. SilverZero

    Post pictures of your working wick and coil setup

    That would be fun to wrap lol.
  8. SilverZero

    What causes the VAPING/VAPOR to taste like burnt vapor?

    I hate to tell you this, but you are getting ripped off. $25.97 for this is ridiculous. It's pretty much the same atomizer as the Innokin iClear 16. Slight price difference. They come with a 1 year warranty, but a coil and wick will not last that long unless you vape it once a month.
  9. SilverZero

    my atomiser keeps on conking out

    What atomizer are you using?
  10. SilverZero

    New to Rebuildables

    I'd recommend buying a little bit of both 28ga and 30ga Kanthal. That will give you some flexibility. You could even buy some 32ga in case you ever feel like experimenting with higher resistance coils. EDIT: Oops, just read your original post and it appears that you already have 30ga. Between...
  11. SilverZero

    Efest luc battery charger and voltage question

    Glad it's working out. I attempted my experiment with pulling a battery off of the charger as soon as it read 4.2V yesterday and got the same results. My AW IMR 18650 2000mAh batteries meter out at 4.21V and my Efest IMR 18650 2250mAh batteries meter out at 4.25V when fully charged. Both...
  12. SilverZero

    EVOD Battery Recall

    The bad batteries have been long gone. It was only one batch sold to one vendor, no others were affected.
  13. SilverZero

    Red Hot Top Leg.... Then Flames

    I just had this issue with the first build on my AGA-T2. In fact, because my mod has a floating pin, as I was tightening the top section onto the battery tube the center pin and the insulator in the AGA were pushing up and out of the deck. My mod isn't as snug as I'd like it to be but I guess...
  14. SilverZero

    Post pictures of your working wick and coil setup

    My first Genesis build ever, on my new/used AGA-T2. Using the mesh that came with it (not sure if it's 400 or 500 or what), 28ga Kanthal, measures out at 0.8Ω. For the first try I decided to attempt the pulse method and while it took a while to get all of the coils to glow evenly it worked well...
  15. SilverZero

    VAMO V3 Disassembly

    I've tried and it hasn't budged at all. I tried screwing the decorative top ring on all the way and gripping that while turning and wiggling it, and I even tried attaching one of the extension tubes to the top for increased leverage and nothing. I haven't put a ton of force into it, but I don't...
  16. SilverZero

    Anyone run out and grab a Vamo V3 yet?

    If you ordered a new one it probably won't have any stones in the top ring. I think that was a limited run.
  17. SilverZero

    Question on YouTube Ecig "Celebs"...

    Other than those two I regularly watch Todd ecigreviews - YouTube and VapinGreek - YouTube.
  18. SilverZero

    bad taste in iclear 30

    He's at 5.5 watts, not volts. 5.5W is actually pretty low.
  19. SilverZero

    Help me find a starting kit for my dad

    That's a good suggestion as well (I have one and use it daily when out and about), but you would definitely want to get two of them if having to vape while plugged in will deter him from using it. It's only an 800mAh battery so keep that in mind.
  20. SilverZero

    What does BHRK mean?

    I've been waiting for you to weigh in on this topic, what took so long? :laugh:
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu