Search results

  1. xlambox029

    plating?!

    Has anyone ever silver plated their own copper contacts, if so was it noticeable?
  2. xlambox029

    can't seem to find what I am looking for on batteries

    2000mah I forgot to mention
  3. xlambox029

    can't seem to find what I am looking for on batteries

    Can a efest imr 18650 high drain 3.7v battery handle a .4 ohm load. The amp draw would be about 10.5. But I can't seem to find the specs for these batteries, I've heard anywhere from 8-10amp draw can someone help me out?
  4. xlambox029

    hi all, new member here, I have some questions!

    The lambo is a great mod I LOVE mine and as far as watts unless u convert it with math I couldbt tell u if it pushes 20 watts since it only increases by volts. Excellent mod though compared to the provari and much cheaper
  5. xlambox029

    ss mesh wicking issues

    Yeah I think that the issue cuz I started tilting and it works great, ill look into the rope next thanks all!
  6. xlambox029

    ss mesh wicking issues

    Ok thanks ill try all ur suggestion and let u know how it goes
  7. xlambox029

    ss mesh wicking issues

    Very little juice goes to the coil
  8. xlambox029

    ss mesh wicking issues

    It is a Nobel 1 hybrid so yes gen style atty, 50/50 pg vg mix. I've rolled countless style wick trying to get it to soak up. The tilting thing works ok but it seems like it defeats the point of it if I have to tilt all the time and I've watched vids of others wick just flood with juice as soon...
  9. xlambox029

    ss mesh wicking issues

    I've seen one othe post and there was no answered question so can someone please help. I am using 400 ss mesh for a Nobel 1. Rolled it oxidized, burned juice on it, everything I've ever read on ss mesh watched every vid, but everything I do I can not get the mesh to wick up to the coil, if it...
  10. xlambox029

    heating of coils

    I have a cyclone atty runnig on a mech mod running 32 awg kanthal 5/4 wraps dual coil 2.1 each coil so 1.0 altogether. When I test fire on the ekowool 3 mm should the coils instintly start glowing middle out or if they are not why aren't they glowing?? No wire touching anywhere it shouldbt no...
  11. xlambox029

    coil talk

    Thank u that's what I thought just needed reassurance
  12. xlambox029

    coil talk

    Example: when some one say a 7/6 wrap does this mean there will be 7 wraps looking from the top and 6 seen underneath?
  13. xlambox029

    considering moving up from my spinner

    K100 are good inexpensive mech mods
  14. xlambox029

    contact pins

    Copper is the best center pins, recently purchased the Trident mech mod all copper contacts hits harder then anything I've tried, it also has to do with set up, if you use rda attys ect. But copper conduct very well and constint
  15. xlambox029

    keep popping coil

    RatDadJoe how do I wrap micro coils and what are the benefits?
  16. xlambox029

    keep popping coil

    How do u wrap micro coils and what are the benders to this?
  17. xlambox029

    keep popping coil

    Exact same spot mine are breaking at ill try 28 awg see if that helps thanks
  18. xlambox029

    keep popping coil

    Sry spelling on my phone is hard. I run a rda cyclone atty on a trident mech mod. I usually use 32 awg 5 wraps at about 1.3. When I tried the 30 awg it would vary between .8, so I kep spacing the coils made sure there were nothing touching with the final check at .6 when o went to fire it heated...
  19. xlambox029

    keep popping coil

    The coils are pppping ill wrap it and go to fire after checking with my built in ohm reader on my vv usually is about and wear from = .8 done to .1i do t reall like running sub oh. But figured of try it see what the title is about but they all have fire but immedinetly popped a coil
  20. xlambox029

    keep popping coil

    Using 30 qwg kqmthal 6 wraps on a cyclone atty with a tridentech mod looked for shorta even spacing ways going on?
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu