I don't think the above suggestions are bottom feeding.
My experiences with bottom feeding RDAs are only with my Reo, but so far the Reomizer 2.0 is the best RDA for bottom feeding. The Vicious Ant Cyclone is nice too, but you have to specify to get a bottom fed version. The A7 also works as a...
Hmm, in MI we just began getting the really cold winter weather. My Reo was not even phased. I had never even thought about the weather mucking up my vape.
I mean seriously though, why can he not put the PV in a pocket closer to his body. To be honest, that would have been my first move after...
You are using 28 gauge when you should be using 30 gauge. I guess you could try more wraps. Try 10-12 wraps. That seems pretty low though. For micro coils with that number of wraps, you should be getting closer to 1 ohm. Try wrapping again. What diameter is the thing you are wrapping the...
Dripping attys are 510 attys that you literally drip a few drops of eliquid on the coils themselves. I can state that the HH.357 is one of the best stock attys I have used. The other one that gets a lot of clout are the atomizers from EmpireMods I never cared much for dripping, but now I am...
You can un-roll strands of silica from regular silica wick and put them into a micro coil. It is a bit more difficult than cotton, but I'm not very impressed with the taste of cotton.
I have had more luck with wrapping a normal coil around a piece of silica and then pushing all the wraps, so...
So what I am getting is you trimmed the legs that went past the screws on the post and the resistance was affected? If this is case, this is an issue. Sometimes, the posts come a bit loose and I have to tighten them after I cut off the excess wire, but it does not affect the total resistance of...
The Reo Grand is the top mechanical mod. It has a juice bottle inside, so you can drip without having to actually drip the liquid onto the atty. it is more than a metal battery holder, it is the best vape.
With my Reo and Reomizer combo, I usually have around 1.5 ohm resistance with a microcoil. I puff some intense clouds without going super low.
To give an idea, if I don't roll my window down in my car, the vapor totally blocks my vision.
You should make sure all of the resistance wire is touching the coil. As far as the force while wrapping, it should be tight, but you should still be able to move the coil further down the wick.
If you want to use silica in a micro coil, you just unravel a few strands off of a piece of silica. Then you use a piece of Kanthal to thread it through the micro coil.
The KFL will not leak. You might get a few drops out of the air hole after filling, but once set up properly, it will not leak.
Part of the issue with gennys is that they do leak when you turn them on their side.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.