Search results

  1. rogergendron1

    Long-term results of the Low Cost Mod!

    i would like to see a LCM like this that has a 5v lithium battery pack regulated to 4 or 4.2 volts able to handle a 5-7 amp load and charges via usb cable how cheap could one build this ... i would use a block of wood for the case...
  2. rogergendron1

    Long-term results of the Low Cost Mod!

    the wall you say so this is a 120volt ac conversion to DC ? what voltage is it regulated to ? what is its amp limmit ? could you swap the power suply to usb ???
  3. rogergendron1

    My mag publishes an e-cig article

    pretty darn good artical if you ask me ! we need more news reports like this !
  4. rogergendron1

    fogger help please !!! those of you who got this working right plz chime in !

    this thing is causing me a ton af agerivation lol i am srsly wanting to trade it for an igo w or something !
  5. rogergendron1

    fogger help please !!! those of you who got this working right plz chime in !

    tried the carto tank set up too... i used a 3mm silica wick with a 5 wrap of 28 g and then stuffed the sides with cotton, i tried a vertica hollow coil with strait cotton too and bolth vaped for a little bit then flodded....
  6. rogergendron1

    fogger help please !!! those of you who got this working right plz chime in !

    i do this every time and it still floods above half way !!
  7. rogergendron1

    So, what is the Halo Triton?

    Very good kit !!! Just be shure to order a 510 adapter so u can use standard attys withcit
  8. rogergendron1

    Pictures of your setup

    this member has some great ideas on making the magneto a partial woody, and i plan to follow up ! i want to maintain the integrety of the magneto's origional state though when modding so it an be converted back at any time ! more modders should look into this sugru stuff it is a silicon clay...
  9. rogergendron1

    Pictures of your setup

    i am also seperatly working on a wooden sleeve for the magneto's tube body, the idea was not mine though it was another members... http://www.e-cigarette-forum.com/forum/members/181904/propofokgov.html he chimed in about how he made a custom silicon adapter and it looked awsome then told me...
  10. rogergendron1

    Pictures of your setup

    ok you want to know my secret ??? her is a 2 page how to and a list of the parts you need http://www.e-cigarette-forum.com/forum/modding-forum/514045-modding-magneto-solid-non-teloscoping-body-hybrid.html you will need a longer 510 pos pin a smoke natural optional 18500 extention tube a...
  11. rogergendron1

    What Flavor Are you Vaping Right Now?

    vaping fatty bacon 60mg from awsome vapor........................ JK lol i am vaping a combo of halo tribeca with a dash of heathers heavanly tobacco dripped on the coil every here and there from a modded magneto and a ebaron clone dripper
  12. rogergendron1

    modding the magneto......(solid non teloscoping body hybrid!)

    you do not need a miller to use a milling bit ! it can be use in a drill press with linmmited capabilities, say you want to drill a hole with a perfectly flat bottom, then a flat bottom milling bit will work just fine ! also if your press is sturdy you can set it say 1/4 in ito the wood and move...
  13. rogergendron1

    modding the magneto......(solid non teloscoping body hybrid!)

    Forsner bits are nice you can drill in arcs... but you may want to pick up a miller bit so that you can cut sideways if need be
  14. rogergendron1

    Pictures of your setup

    smoke magneto modded into a solid body 18650 and a fogger v3 on top
  15. rogergendron1

    What is the best mech mod to start on?

    well i tell people the smok magneto or the smok natural, the sigelli #8 is a good mod too and all are around 50$ or under
  16. rogergendron1

    Burnt taste with Kanger Protank II, even with brand new coils

    simple just if you want a higher resistance get higher guage wire lower res get lower guage wire and shoot for 5-6 wraps now i wrap big coils that just barley fit in the head but its how i do it so... no milion wrap micro coils for my protank or i wouldnt be able to judge resistance 5-6 wraps of...
  17. rogergendron1

    Burnt taste with Kanger Protank II, even with brand new coils

    with 80% vg you will probably have to remove bolth top wicks ! when i vape 100% vg i only use a dripper and if i feel the need to put it in my protank i make my own coil usin 28g kanthal micro coil and a single piece of 3mm silica thrugh the center of it, no flavor wick and i flip the silicon...
  18. rogergendron1

    Blu E-Cigs are a rip off.

    ohh yes i almost forgot about kanger tech ! kanger makes the best clearomizers on the market right now ! they have the EVOD made to fit an ego perfectly, the protank, the protank mini again made for an ego, and the aero tank ! the pro tank is a very reliable clearo, probably the most reliable...
  19. rogergendron1

    Blu E-Cigs are a rip off.

    every one will have there own opinion but if you realy do want to stick to cig a likes then this is the best there is ! its the halo G6... you will not be dissapointed with this one !!! halo makes one of the best e juice lines on the market and the e juice called tribeca is favored by a lot on...
  20. rogergendron1

    Blu E-Cigs are a rip off.

    if carrying something the size of a pack of buts is too big for you than take a look at this ... the i taste vv its the top of the line IMHO pen style or stick style vaporizer there is ! it is vv/vw and has a digital display that can read the resistance of your clearo or carto !!! its 800mah...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu