Search results
-
vision eternity
I have one and like it very much. The only time it has ever leaked is when a friend tried it, I said "20 to 25 drops" and he heard "empty that bottle in to it" or something and didn't bother to count (it was many, many drops). :D He plans to order his own next week. Be sure the coil is...- Oktyabr
- Post #6
- Forum: Rebuildable Atomizer Systems
-
Point-WHAT ohms???
The point I tried to make in my first post is that a mech with or without an RBA is not the threat. As vaping grows in popularity, exponentially perhaps, sooner or later accidents *will* happen (there has already been one that I know about). As the majority of new vapers will be using your... -
Victory over aga-t!!!
No. I refilled it for that photo and it seems much better now about that. Maybe the wick exhibited some sort of siphoning on it's first fill, compounded with the suction from my first few puffs?- Oktyabr
- Post #153
- Forum: Rebuildable Atomizer Systems
-
Sigelei Mechnical Mods
I'm assuming you used a drill press or did you do this by hand? Remember the size of the drill bit and tap? -
VAMO "02" error and heat at the top of the battery - MY SOLUTION!
A buddy of mine has the gun metal version of it and all his press fittings are loose! This of course causes all kinds of poor connectivity problems, not to mention that the press fit joints are also chromed. I'd personally like to sand down those joints a bit and find a way to press them into...- Oktyabr
- Post #9
- Forum: New Members: Introduce Yourself!
-
VV question from a noob lol
No. But if you know the math you can adjust wattage by adjusting voltage ;) Watts = (Volts x Volts)/Resistance of your atty Volts = square root of (your *target wattage* x Resistance of your atty) Amps = Volts/Resistance Watts = Volts x Amps- Oktyabr
- Post #5
- Forum: New Members: Introduce Yourself!
-
Sigelei Mechnical Mods
Specifically the brass plunger in the switch, once the bottom magnet is removed. -
Point-WHAT ohms???
Nice posts everyone! Nothing really left for me to add except that mechanicals and RBAs are NOT the problem... it's how they are used (without proper safety knowledge). I had a half dead, broken Ego 650mah go thermal in my hand once. At least with a well built mech I don't worry as much... -
Sigelei Mechnical Mods
I actually don't mind the chromed brass end caps on my #8. And I think the tubes are actually of thicker walled stainless steel than the #19! -
Victory over aga-t!!!
LOL! I got the sticker at my local pharmacy. It comes with labels and printed instructions for many prescription drugs ;) And no, I couldn't get seven to fit the stock AGA-T2 hole. Ended up with five :)- Oktyabr
- Post #146
- Forum: Rebuildable Atomizer Systems
-
Sigelei Mechnical Mods
I'll state here something that's already been said numerous times, in this thread as well as others... Super Low Resistance vaping DOES produce a TON of vapor and I too found myself going from 24mg juice, in 2.0+ ohm devices, to 12mg and even 9mg by cutting my juice in half with extra VG. Just... -
Sigelei Mechnical Mods
I'm scared to try and drill a hole for a brass bolt in the button assembly of my #19 but that's the next mountain to climb (and getting rid of that gap!) Top is replaced with a longer brass screw, improved spring so it contacts the inside of the lock ring all the time, o-ring on negative post to... -
Victory over aga-t!!!
Obligatory glamour shots:- Oktyabr
- Post #144
- Forum: Rebuildable Atomizer Systems
-
New GOTVAPES.com 2nd Multi Mega Prize Monthly CONTEST Giveaway!!!
And Happy belated B-Day Yiddle! My oldest boy just turned 25 on the same day :) -
New GOTVAPES.com 2nd Multi Mega Prize Monthly CONTEST Giveaway!!!
I do too. I like to use 3" of #500, rolled solid. I also vape higher VG, from 65/35 to 50/50 and even 30/70 in an SLR setup. eHuman claims he can get 3.5" of the same to fit a factory AGA wick hole but my hands seem to be incapable of rolling one THAT tight. The only exception is 5 wick... -
-
Sigelei Mechnical Mods
Just wanted to post quick and say I fixed the mis-fire, burny, shocky thing going on with the #19. I took it in to my local hardware store and searched their selection of compression springs. I found one that looks pretty much exactly like the factory one but it's maybe one third longer. I... -
Sigelei Mechnical Mods
I want to like the #19, I really DO! But I don't. I put an o-ring on the post to shorten the throw and stuffed a longer brass screw in the 510 end to get rid of that magnet. Tried a softer spring in the switch as well but that bottom magnet will hold the circuit shut with a weaker spring... -
Considering buying a riva....
"The design is solder free and without wires featuring a manual switch activated by a solid metal button that will tolerate over one million presses (machine tested). There is no electronic circuit inside of body, also we add vent in bottom cap for air cooling, that is why we say it is durable...- Oktyabr
- Post #6
- Forum: New Members: Introduce Yourself!
-
tell me about your phoenix
I should have qualified my reply by saying I love drippers. I have four Phoenix clones, a Vision Eternity, an IGO-L, an AGI (I bought it for it's dripper mode), and two Smok RDAs. The Smok RDAs aren't perfect but they are my favorites.- Oktyabr
- Post #5
- Forum: New Members: Introduce Yourself!