Search results

  1. Heavyrocker

    EHPRO kayfun lite + not wicking...PLEASE HELP!!!

    Honestly tho,for me anyway,i dont think any tank can be completely leak proof.I still get a small dribble now and then from my KF.I just gently blow out the excess down the drip tip to clear the airhole,no biggie.Beats dripping for me as dripping can be messy.I still love my Kracken and RSST still.
  2. Heavyrocker

    EHPRO kayfun lite + not wicking...PLEASE HELP!!!

    1.5 ohm maybe too much,the coil takes longer too heat up for me,i have to a 1 ohm wrap.Im using mech mods.If you have a VW mod you should be ok with 1.5 ohm.Are your wicks over the channels or tucked in the corners of the deck?
  3. Heavyrocker

    EHPRO kayfun lite + not wicking...PLEASE HELP!!!

    Thats like my build,except i have my coil raised higher and the wicks covering the channels instead.I dont have the twisted wire,just normal.
  4. Heavyrocker

    EHPRO kayfun lite + not wicking...PLEASE HELP!!!

    I dont think you need to be ''sucking '' juice up from the channels,i just have my wicks gently laying on top of the channels to soak up the juice naturally,for me this keeps excess juice out of the bottom of the chimmney and i have no flooding or leaks.I also believe having the wicks over the...
  5. Heavyrocker

    EHPRO kayfun lite + not wicking...PLEASE HELP!!!

    opps....1/16... 1/6 would be .1666667 of an inch,just UNDER 3/16 of an in in diameter....LOL
  6. Heavyrocker

    EHPRO kayfun lite + not wicking...PLEASE HELP!!!

    1/6 drill bit.
  7. Heavyrocker

    EHPRO kayfun lite + not wicking...PLEASE HELP!!!

    You will find it works better with a micro coil with 28 ga wire at 10 wraps for a 1 to 1.2 ohm build.No offence,but thats the worst build ive ever seen,worst that the Fasttechs stock coil :ohmy:builds.
  8. Heavyrocker

    Best Wicks for Kayfun Tanks

    Heres the best way i find to get the best wicks for the KF tanks.Unroll cotton ball into a long one 6 inch strip and cut into 4 pieces,then into 16 smaller ones.Wicks always ready and ready to go.They will still be a tad big at the the final cut but from there i just thin down with my fingers.
  9. Heavyrocker

    I Give Up

    I tried the exact method you describe above and it did not work for me,i just gently let the wicks sit on top of the channels and rasied the coil above the airhole as much as possibe,day 3 now its performing flawlessly.So good in fact my Kraken and RSST is on the back burner.With my wicks...
  10. Heavyrocker

    I Give Up

    Dont give up,it took me a week to get it right,but once you do,its worth it.Im thinkn of getting a few more.The wick has too be a wee bit snug in the coil i find,too loose and it will ''drip'' back into the aorhole,too tight no vapour,LOVE THIS TANK.
  11. Heavyrocker

    Kayfun LITE

    I use these in the KFL,plastic can be ''scrapped'' and made to be fitted if need be.Plastic also dont feel cold on the lips like SS and ceramic tips. https://www.fasttech.com/p/1437409
  12. Heavyrocker

    Best Combo?

    Never had a box mod yet,i may look into gettn one later.
  13. Heavyrocker

    Kayfun LITE

    Finally got this tank working perfect,it was pretty simple.I ohm wrap with 28 ga K,raised the coil as far as possible and got the wicks just sitting lightly on the channels.I find a few primer puffs to get the wick wet works too before each blast.With the wicks tucked in the corners i was...
  14. Heavyrocker

    I Give Up

    UPDATE; Finally got this tank working perfect,it was pretty simple.I ohm wrap with 28 ga K,raised the coil as far as possible and got the wicks just sitting lightly on the channels.I find a few primer puffs to get the wick wet works too before each blast.With the wicks tucked in the corners i...
  15. Heavyrocker

    Best Combo?

    Mine is the Vela/Kracken with SS cable with mesh topping,.8ohm.Next is the Brass Nemmy/KayfunLite with cotton 1ohm.Next is the Poldiac/RSST with SS cable with mesh topping at .8 ohms. Vaping FA Cola,Hangsen RYA and TFA peant butter.
  16. Heavyrocker

    After a half hour of discussing ecigs, a smoker converts... to a Blu >.<

    Tell her to try the Eroll.
  17. Heavyrocker

    what do you all think...

    Good wire if you plane on building steam turbines for use in nuclear power plants.
  18. Heavyrocker

    Where to find affordable kayfun? (no clones)

    Word is out that the KF clones are the real deal.I have a FT clone and very happy.
  19. Heavyrocker

    Freaking out People

    Coldrake Come on,you think i did a hit like in that video?...If you find a Mod that good,let me know.
  20. Heavyrocker

    Freaking out People

    I vaped in elevator with 2 people i know who asked me to show them my new KF tank,relax for Gods sake.
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu