Search results

  1. Treeburner1983

    Adding WTA to DIY E-Juice for Sub-Ohm Tanks

    I've been making my own juice for over six months now, and have settled on a few flavors I love. I've cut back to 6mg/ml nicotine in my juice, but would like to try WTA. Ordered some 24mg unflavored WTA juice from Aroma E-Juice, but I'm reading conflicting suggestions as to where to start, and...
  2. Treeburner1983

    smok xcube 2

    After all the issues with the Smok m50/m65 and the m80, I would not trust any temperature control mod made by Smok until I hear LOTS of good things here first. There's plenty of good mods out there; no reason to buy the lousy ones. -Treeburner
  3. Treeburner1983

    Fasttech or Focalecig....?

    Focalecig, because it's nice dealing with the same person when you contact them, and Doris will give you the straight scoop when dealing with delays or other issues. I still order from FT as they have a larger selection, but prefer Focalecig. -Treeburner
  4. Treeburner1983

    ipv 3 worth it?

    The IPV3 Li is a great suggestion - great mod with all the features available at this time (nickel and titanium TC, 200w max, touch sensor, magnetic door). -Treeburner
  5. Treeburner1983

    Dual Coils for Temp Control?

    I love twisted kanthal and nickel for doing dual coils for TC. Have been running dual coils in my Goliath since I got my IPV4, and have been using 32g ni200 twisted with 0.4mm kanthal ribbon (what I believe is called a tiger coil). The kanthal adds some durability and support to the thin, soft...
  6. Treeburner1983

    Sigelei 75w Temp Control

    My fiancée ordered the Sigelei 75w TC mod from VapeNW while I wait for the ipv d2 from 101vape. I already have quite a few dual 18650 TC mods, but I'm still looking forward to the Sigelei 150 TC. - Treeburner
  7. Treeburner1983

    Where can I get GOOD vg for DIY eliquid? Mine is horrible!!!!

    I use this same VG for my ejuice and have found it to be equal or superior to anything else I've tried. Get the big bottle! -Treeburner
  8. Treeburner1983

    What are you getting from subohming?

    I like the density of the vape from my high airflow tanks built with ni200 for TC. -Treeburner
  9. Treeburner1983

    How popular is vaping where you work?

    I am the only vaper at my job, and there are also 3 smokers. However, vaping is popular at my job, as people often stop by my office to get a whiff of whag I'm vaping! -Treeburner
  10. Treeburner1983

    IPV D2 announced.

    Preordered through 101vape today - looking forward to my first single-battery TC mod, and loving my IPV4 and especially my IPV3 Li so for $50 it was a no brainer. Fianceé ordered the Sigelei 75w TC, so will be reviewing them both when they come in! -Treeburner
  11. Treeburner1983

    Which TC MOD to buy?

    I have the ipv4 and the ipv3-li as well as a VF V3 clone, and the ipv3-li is my favorite of the bunch. Upgraded to 200w and Titanium option, and it delivers a solid vape with nickel or titanium. The only thing I don't like is that the outside has a metal finish and they don't seem to sell...
  12. Treeburner1983

    Sigelei TC 150

    I hope that minimum 0.1ohm resistance is not accurate, otherwise this thing will be completely useless for dual coil TC builds. -Treeburner
  13. Treeburner1983

    First Temp Control Build

    I find with nickel twisted with kanthal I have to set the temperature lower than I would with pure nickel, likely due to the heat retention of the kanthal. I have my Goblin and Goliath both set up with my ideal build, both running at 325°F and registering 0.080ohm on my ipv4's: dual coils, each...
  14. Treeburner1983

    First Temp Control Build

    The nickel carries the current and the kanthal acts as support for the nickel. The kanthal may have a minor effect on the resistance, but overall it's just to prevent the fragile nickel from getting damaged. To twist the wires together, cut two equal lengths and tie one end together with a...
  15. Treeburner1983

    First Temp Control Build

    For dual TC coils I've found 32g ni200 twisted with either 34g kanthal or 0.4mm kanthal ribbon to be the ticket to getting the resistance high enough without having super-fragile coils. Good luck! -Treeburner
  16. Treeburner1983

    Possible stupid question

    That's not a stupid question! Unfortunately I don't know the answer, but figured you could use a bump. -Treeburner
  17. Treeburner1983

    Next tank? Goblin ?

    The Goblin is dual coil and has a pretty cramped deck, so if you want something simple I would suggest looking for a single coil design more similar to the subtank. The Subtank Mini has a rebuildable deck that is very simple to build on - the Lemo 2 (and original + Drop) are easy single coil...
  18. Treeburner1983

    rDNA 40? Wait? Or something else?

    In TC mode the rDNA40 does pre-heat, meaning it will fire at higher than the set wattage for a split second to get the coil up to temperature. That's why you're seeing the increased wattage. -Treeburner
  19. Treeburner1983

    PSA: Don't use the onboard charger for the IPV4!!

    This is a good point - the micro USB is for firmware updates only, not for charging. The IPV4 uses a 9v 2A charger which plugs into the round port at the top of the battery taco. -Treeburner
  20. Treeburner1983

    House blend v.s Company eJuice

    Oops double post. -Treeburner
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu