Search results

  1. HigherStateD

    عضو جديد

    As I understand it, OP is asking about variations in PG and VG, similar to how PEG has weights associated with it. My guess is no, but I'm no expert.
  2. HigherStateD

    Dual battery mod... uneven battery drain

    My guess, it's a series/parallel relay. I don't know exactly how it works, but it's similar to how a diesel starter works.
  3. HigherStateD

    Dual battery mod... uneven battery drain

    One battery is draining completely before the other is used at all? I don't have that particular mod, but that doesn't sound right to me. Hope you get a better answer soon.
  4. HigherStateD

    30Q question

    Well within the amp rating of those cells, so that shouldn't have caused an issue. You said you have had them for 5 months, 3-4 cycles per day? That's about the lifespan of an 18650, as they're supposed to be able to take 300-500 charges before deteriorating.
  5. HigherStateD

    30Q question

    Ok, but what mod are you using, what kind of tank and coil, and what settings, particularly wattage, do you set your mod to?
  6. HigherStateD

    عضو جديد

    To the best of my knowledge, Vegetable Glycerin and Propylene Glycol aren't broken down into different types. I have noticed that, depending on what the glycerin is made from, and how pure it is, will affect taste. The only solvent used in vaping that has variations is polyethylene glycol, which...
  7. HigherStateD

    Devine tribe Devine crossing.

    Anyone have one of these? I'm interested in real world experience from real people. Very interested in the SiC crucible available for it. Divine Crossing Version 4 Crucible Cup Rebuildable Concentrate Atomizer - Divine Tribe
  8. HigherStateD

    30Q question

    They're rated at 3000, but that's with a 2.5v cutoff which is well below what mods usually cut off at, being about 3.2v. the only way to tell is by comparison to what you were able to get out of them when they were new. Keep in mind also, that Samsung batteries aren't licensed to be sold to...
  9. HigherStateD

    30Q question

    Other than seeing reduced mAh, the only other thing most chargers would display that would have any relationship to health of the cell would be internal resistance. As I understand it though, most chargers measure DC resistance, which isn't very useful compared to AC resistance. Where did you...
  10. HigherStateD

    Hi to all, I need some help.

    This is rayon, so there is less than I'd use for CB, but not by a whole lot.
  11. HigherStateD

    Hi to all, I need some help.

    I stand corrected. Looks like too much wick, and definitely way too much in the tails.
  12. HigherStateD

    Hi to all, I need some help.

    I use SS primarily as well, but use ni80 from time to time also. I found that by wearing gloves, I wasn't depositing skin oil on my coil and wick, so I no longer have a break in period. Hth.
  13. HigherStateD

    Hi to all, I need some help.

    It would be a lot easier to determine without guessing if we had a picture.
  14. HigherStateD

    Hi to all, I need some help.

    A 3mm coil should take most of a strip of cotton bacon to fill properly.
  15. HigherStateD

    Hi to all, I need some help.

    Might want to look into the Scottish roll method. Too little wick leads to metallic taste, too much, and it's more like burnt cotton. Right in the middle, obviously, is where ya want it. CB "should" expand a little when wet, but you may just need a little more.
  16. HigherStateD

    Hi to all, I need some help.

    I pinch my coils too, shouldn't be an issue. What technique are you using for the wick, just pulling the desired amount off the strip and running it through? Scottish roll? Are you twisting it by chance?
  17. HigherStateD

    Hi to all, I need some help.

    It wouldn't necessarily be blackened, depending on how hot it got. Even with low juice, but some still there to keep it from scorching, there can be nasty wick and coil taste. As SupplyDaddy mentioned, rayon may be the trick, but it sounds like you already have a good selection of wick. I've...
  18. HigherStateD

    Hi to all, I need some help.

    Hello and welcome! What wattage are you vaping at? What type of coil do you use? What are you using for wicking material? What ratio (VG/PG) juice do you use? My initial thought is, your wick is running dry in the middle of the coil mid vape.
  19. HigherStateD

    Metal lung disease and American vape Zen pen

    So, I was watching TV the other night, and saw an anti-vaping ad claiming metal shards fly off my vape coil and damage my lungs or something like that. Today I decided to follow up, and Apparently there was a woman out in California that got hard-metal lung disease.Apparently she used a...
  20. HigherStateD

    Couple QUESTIONS & Comments

    Salt nic can be used in any atty, but I would NOT vape 35mg salt at 40-50w. I personally vape 3mg salt at about 60w. 1mg at about 120w.
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu