Search results

  1. AMDTrucking

    Taifun GT Discusion!

    What is the purpose of the upper, additional airflow? Maybe for use in Dripper mode... Because in Tank mode, when opened, it simply depressurizes it and e-liquid runs outside slowly, but surely. Maybe I don't know something? But I've been vaping this tank all day today. It reaches 65W in TC mode...
  2. AMDTrucking

    Taifun GT Discusion!

    h It's called: 22mm Collet chuck. It is the best way to grip 22mm Kayfun, for example when it is stuck, without damaging it. The one on the left, I made from scratch. From trailer hitch ball, to be exact. The one on the right is a factory made Collet, I just made a chuck for it.
  3. AMDTrucking

    Taifun GT Discusion!

    What stands? :lol:
  4. AMDTrucking

    Taifun GT Discusion!

    Yes, it is 22mm. About the wire posts: I thought you've seen my solid Taifun GT II wire posts, instead of tubular ones.
  5. AMDTrucking

    Taifun GT Discusion!

    It, certainly was. But I had to make sure that everything is nice and clean in there. That it has no chips, oil, dirt or burr. That's why I disassembled the base and, then pressed it back together again. Also, if you've noticed, I did not replace the wire posts this time. I found the original...
  6. AMDTrucking

    Taifun GT Discusion!

    I too, received my HOTCIG GS II. I didn't modify it much, except that I milled the air intake slots like I do on all my Taifuns. Then I tried to build it like Flash E-Vapor filling those vertical juice flow holes with SS mash, but juice flow wasn't enough for me. Until I decided to leave them...
  7. AMDTrucking

    HOTCIG DNA200?

    That's right. In order to be able to use my SkyRC B6AC V2, I had to make few wires: For HotCig DX200, I made JST XH extension cord 1:1 and Positive/Negative connectors Ø3.0mm. And for HCigar VT200, I used the same JST XH extension cord and made Positive/Negative connector cord with RJX XT30...
  8. AMDTrucking

    HOTCIG DNA200?

    Thanks for contact e-mail address at HotCig. I think Evolv will honor the warranty on your DNA200, unless you are able to replace it yourself. I would.
  9. AMDTrucking

    HOTCIG DNA200?

    Could you please share your source of $41.80 battery shipped? I tried www.hotcig.net but it seems to be inaccessible.
  10. AMDTrucking

    HOTCIG DNA200?

    I'm not sure. I've re-charged that battery maybe 10 - 12 times already at 2C (30 minutes). No problems so far. No heat, no swelling.
  11. AMDTrucking

    HOTCIG DNA200?

    I bought HotCig DNA200 specifically for the reason of having detachable battery. Because, let's face it: It is not the best of the bunch, esthetically, ergonomically and battery capacity wise. USB 1A charging takes too dam long. Included, "Balance" charger looks like it had just come out of...
  12. AMDTrucking

    HOTCIG DNA200?

    10 years ago... But, I agree: Better safe, than sorry. :-)
  13. AMDTrucking

    HOTCIG DNA200?

    I don't know. Correct me if I'm wrong. But I did some reading on LiPo and spoke with several RC model helicopter enthusiasts. They all agree on 2C charging is safe. I've been charging mine with 2C (2A per cell, 6A total). It only takes 30 minutes and the battery remains cold. IMHO
  14. AMDTrucking

    HOTCIG DNA200?

    It arrived dead as a door knob. 1.2V per cell, I think.
  15. AMDTrucking

    HOTCIG DNA200?

    Hotcig also also shows 9.341 Wh (842 mAh) instead of 9.99 Wh
  16. AMDTrucking

    HOTCIG DNA200?

    I checked the LiPo battery capacity of my new HCigar VT200 1300mAh and guess what? My SkyRC iMAX B6AC V2 showed 1078 mAh or 11.96 WA instead of 14.43 WA that they claim. Then, I used Escribe's "Battery Analizer" at 40W and it showed 10.866 usable Watt Hours. Which equals to 980 mAh instead...
  17. AMDTrucking

    HOTCIG DNA200?

    I did. See above picture. :-)
  18. AMDTrucking

    HOTCIG DNA200?

    USB consists of four wires. I've seen USB cables that only do the charging without data connection. I'm wondering, if two wires are for charging and, the other two are for data... If it was that simple, I could just cut the two (or just the positive one if they are using common ground) wires...
  19. AMDTrucking

    HOTCIG DNA200?

    Guys, is there a way to disable USB charging every time when it is plugged in? I'd like to be able to use Escribe without initiating a new charge cycle every time.
  20. AMDTrucking

    HOTCIG DNA200?

    Has anyone tested Titanium wire from FastTech? I tested two of mine and the test showed that Medical Grade-1 from Stealth Vape, is better then Sweet Spot I have no idea which one is better, so I've got all six of them. :lol:
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu