Search results

  1. michliu

    Geyscano Box Mod (Chinese 50 Watt BF'er)

    I don't find it to be too slippery, less so than an anodized Grand.
  2. michliu

    Geyscano Box Mod (Chinese 50 Watt BF'er)

    Received mine yesterday. Small nits: the double tap needed to wake from sleep and the very sharp ridges on the box holding the door in place. 1.3 ohm coil works nicely at 40 watts.
  3. michliu

    Geyscano Box Mod (Chinese 50 Watt BF'er)

    It's the version 2.5 that you want. https://www.fasttech.com/products/0/10008591/1901902-zenith-v2-5-styled-rebuildable-dripping-atomizer
  4. michliu

    Geyscano Box Mod (Chinese 50 Watt BF'er)

    Make that at least two of us. And I am almost positive, we will be taking one for ECF.
  5. michliu

    2015 - New Bottom Feeder Mod from China!

    I've been vaping 3 years and got my first Reo 6 months ago. What got me curious was a Vision Aurora BFT with an old Ego atomizer I had in a drawer. Wish I had found Reos earlier, the cost of entry was just too high for someone like me who bought a lot of clones, but I would have saved hundreds...
  6. michliu

    2015 - New Bottom Feeder Mod from China!

    I've had my KUI for a month now from a GB I ran. The tab the button presses down on is pretty flimsy. The QC on the 510 is also not good. Topside, the height of the 510 isn't the same from one unit to the next and the threads aren't great. On the bottom side of the 510, the screw that holds...
  7. michliu

    Catfish atty mods.

    I can confirm CH's Scenario B. I built coils and confirmed the atty would fire. The atty would not make contact on the Reo. With CH's suggestion, I juiced the Reo's 510 and screwed the atty tight and backed off, repeating the process about 15 times. It would give about 10-20 degrees with...
  8. michliu

    Catfish atty mods.

    Not questioning the advice, as this was certainly on my mind, just trying to understand the Reo a bit better. I was more afraid of the Reo's 510 unseating from the Reo as I tried to get the atty to make contact and torqueing too hard. Damage to the gasket and spacer, that would come from too...
  9. michliu

    Catfish atty mods.

    My LP is a couple of months old. CH's suggestions was to lube the 510 pin and keep turning to wear down the plating on the Reo's 510. I had to force pretty hard, but it eventually worked, without impairing the ability of any of my other atties to fit on the Reo. There are still a couple of...
  10. michliu

    Catfish atty mods.

    Thank you Chowderhead72 for the insight on new Reo 510 connectors and tips on getting my new BF Odin to make a connection. As you can see, she's firing fine and the flavor is excellent. Best deal on a BF atty by far.
  11. michliu

    Rebuildable atomizer What to get next?

    The RM5 will be too much airflow if you like mouth to lung.
  12. michliu

    Clearcoat my copper vein?

    I just recently picked up a copper vein LP Grand. Why oh why did I wait so long to get a Reo? With the RM5 or Origen BF built to 0.4 ohms, I've finally found my perfect vape after more than 2 years and thousands of dollars needlessly spent on chasing the nirvana that was already there. No...
  13. michliu

    The Big Nasty 26650

    I have seen a few posts about the switch sticking. On mine it is because the button side of the switch is loose. If you unscrew the battery side delrin, you'll see the button side magnet. I used a couple of rubber jar openers to press on the magnet and the switch to tighten it up. That...
  14. michliu

    Vape Los Angeles Oni Mod Interview

    First replay on Soundcloud's Click Bang replays. Oni discussion starts at 14:15. The Click, Bang! Archives by VP Live on SoundCloud - Hear the world
  15. michliu

    Good site from which to purchase clones?

    I-ChyBrid
  16. michliu

    Terminator/Nautilus/Choddy/Oddy Clone Pics, Tip,Tricks and Quirks

    That's about all I ever leave mine open. A 1/4 to 1/2 turn of the mouthpiece. I use Peaches n Cream cotton yarn, two wicks down the ceramic channel and one wick down the other.
  17. michliu

    Fogger V2...WOW

    Check the flat insulator inside the AFC and make sure it isn't blocking the airholes. Open the breather holes with a needle file in the 510 pin if you need even more airflow.
  18. michliu

    EHPRO Kayfun Lite Clone

    I haven't seen this mentioned in this thread, but it appears as if EHPro designed this to have the legs of the coil go through the holes under the screws? This is the way I have mine built now, with the wick stuffed down into the chamber, it doesn't produce a hot leg, but I do notice it when I...
  19. michliu

    Fogger V2...WOW

    This build is pretty idiot proof. The amount of cotton you can pull through a 1/16" microcoil is just the right amount to prevent flooding and dry hits. I still have the same coil in mine after a week and a half. On each fill, I just pull out the cotton wick, dry burn, and thread a new wick...
  20. michliu

    Fogger V2...WOW

    I just used a needle file and opened up the breather holes, no specific size, just kept spinning the needle file until it looked right. Much better. The draw was too tight before, even with all the insulators out of the way of the airholes.
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu