Search results

  1. D

    Lemo 2 wire??

    Nah, I'm pretty sure I'm right... it is N80, just not 100% on the gauge, thought 26, but maybe 24.
  2. D

    Lemo 2 wire??

    I believe it is nichrome 80. Perhaps 26 gauge, if I remember right.
  3. D

    Max wattage for delta II 1.2 ohm rba coil?

    What I have been trying to say is that all other factors being equal (the OP is using one specific tank, one desired ohm range, etc) increasing the power output (wattage was the measurement the OP was asking about) increases the heat. Surely we agree on a lot more than our online conversation...
  4. D

    Max wattage for delta II 1.2 ohm rba coil?

    I feel we are running in a circle here. Until the coil is wrapped, it is also a variable to be taken into account when finding a desired heat. Besides volts are a measurement of power applied, and wattage a measure of the power output by the circuit. So, amps tell you how much electricity is...
  5. D

    Max wattage for delta II 1.2 ohm rba coil?

    Like I said, if all criteria are variable, each one has an effect on the heat output. However, make some constant, and the others will have to be varied to adjust heat. Wattage is simply a way of expressing electrical current, more current over a static curcuit (1.2ohm whatever gauge you settle...
  6. D

    Max wattage for delta II 1.2 ohm rba coil?

    I have to disagree, wattage directly determines heat, regardless of the amount of wire used. More wattage equals more heat. The rest of your reply is pretty much spot on. When everything is a variable, that means every piece determines heat. The amount of wire, type of wire, the gauge, AND power...
  7. D

    Best Cloud Build For Single Samsung 25R Tube Mod?

    My current build for your type of setup is a dual parallel 28g, about 6 wraps I think, at .3ohm. In a Kennedy clone, plenty of clouds and flavor, though I favor the later more than big crazy clouds. I wouldn't feel safe building lower, and test on multiple devices before firing on my mech.
  8. D

    Spaced or Touching single coil using Kanthal wire (non-sub ohm) ?

    Spaced or contact has no effect on surface area. Juice only vaporizes where coil contacts wick. I'm pretty sure these are facts. The only difference I've noticed is my gunkier juices can go a little further (maybe 10-15%) between rewicking on a spaced coil with the same properties as a contact...
  9. D

    75W Vaporesso TARGET 2 VTC Kit with Ceramic cCELL Coil

    This thread is pretty amusing. I use a sintering oven every day at work, we fire our zirconium crowns in it to harden. I work in a dental lab. Sinter is a regular part of my vocabulary, cute seeing other people discover it, since I never thought it was a special word. Basically it is a very...
  10. D

    Favorite mech builds?

    Quick ramp up, I'm running a dual coil, twisted 30g 3mm id @ .4ohms. On a Kennedy Competition clone, chucks clouds and rich flavor. I'm new to building duals, and for a mech, but I use steam engine to calculate a build for between 3.7 and 4.2v (I shoot for around .4ohms, and make sure I am...
  11. D

    Subtank Mini Rba Problem

    For the first question, it could have just gotten loose somewhere. The second problem.... got any toothpicks or even a qtip you could strip the cotton off and use that to hold your coil in place while mounting. Maybe even a coathanger straightened out.
  12. D

    reducing amount of vapour

    1. Turn down the power, or use higher resistance coil. 2. Take shorter draws. 3. Increase PG concentration.
  13. D

    Help Mooch!!!!!!

    What about popping them in the microwave for a minute, that should zap em back to life.
  14. D

    PICTORIAL: *The URBA* ~A new RTA by Petar K

    Me too, since it was a custom order I had to get a few pieces done, so I also have a frosty white tank, a black to white swirl, and he threw in another blue that was messed up painting but still looks cool. Thinking I need another URBA for some of this glass.
  15. D

    PICTORIAL: *The URBA* ~A new RTA by Petar K

    Check out my blinged out URBA. Glass was purchased from IBTanked, custom cut, had to find new thicker orings, but now it's nice and snug.
  16. D

    Possibility of glass for URBA RTA, measurements in post.

    Alright! The new orings seem to be perfect! Thank you again for all your help.
  17. D

    Eleaf Lemo II

    I don't understand how you keep breaking the glass. I've had a Lemo 2 since they came out, I clean/wick once a week, and never broke my glass. I've even droped it a few times (small distances) without a single scratch/chip/sign of damage. I think you must be doing something wrong, or just have...
  18. D

    Thin down VG with vodka ??

    Why not get some PG and mix with that?
  19. D

    Possibility of glass for URBA RTA, measurements in post.

    Thanks for all the help, just fyi the tank came with a steel and an alternative pmma section with no intention of glass being used. The steel looks awesome, but I want to see my juice level (and that my wicks are all the way to the bottom of the tank). I will look for some orings tomorrow and...
  20. D

    Possibility of glass for URBA RTA, measurements in post.

    Measured the stock oring, 18.25 x 1mm. Perhaps something in the 16-18 mm range with a 1.3mm or slightly larger thickness? Would this even be a size you stock?
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu