Search results

  1. Mark Todd

    Check It Out!! New X-FIR from our friends at Vision, Wood mod, All new Electronics

    just used a little bit of wood off the floor, drilled a 12mm hole through it, sat the 510 connector in it and drew round the mod and then cut it, needs finished off but for a 2 min job ;)
  2. Mark Todd

    Steam Monkey announces... The Link: A Zen2 spec product line up.

    Well as someone who isn't a Zen switch fan, it's still on my daily rotation of mods which is a good sign :D Sent from my GT-N7000 using Tapatalk 4
  3. Mark Todd

    New iTaste VTR (not released)

    I wanted to use my iAtty in it which is 21mm, to big :( I took a grinding stone to the top ring and started removed material from the inside till I could slide the iAtty through it then sanded the inside of the ring till it was smooth. It meant taking about a 1mm slice of the ring so it's now...
  4. Mark Todd

    New iTaste VTR (not released)

    One VTR, a dremel and some time and we have this :D
  5. Mark Todd

    Steam Monkey announces... The Link: A Zen2 spec product line up.

    Dual Coil setup, just stunning :D
  6. Mark Todd

    Steam Monkey announces... The Link: A Zen2 spec product line up.

    Nope, doesn't effect the venting at all :)
  7. Mark Todd

    Steam Monkey announces... The Link: A Zen2 spec product line up.

    One of the guys on the HEM forum suggested just using O rings on top of the switch, same as the Super-T tube mods, rattle gone :D I've embedded a note in the review to let others know.
  8. Mark Todd

    Fogger V2...WOW

    Lol, no chance, I just drained and refilled it to check what size of rope it would take :) Sent from my shed by TJ
  9. Mark Todd

    Fogger V2...WOW

    For those that are interested, largest ss rope you'll get in there is 2mm Sent from my shed by TJ
  10. Mark Todd

    Fogger V2...WOW

    The ones in the review :D
  11. Mark Todd

    Fogger V2...WOW

    It's as simple as described :) Sent from my GT-N7000 using Tapatalk 4
  12. Mark Todd

    Fogger V2...WOW

    No flooding issues with cotton, didn't do a cotton build on cam, tried it afterwards and it blew the other builds out the water. 1.8ohm micro coil, not one dry hit and zero flooding and that's without the O ring that you'll hear me mention in the vid. Sort the O ring out for the shorting...
  13. Mark Todd

    Fogger V2...WOW

    Cotton, best by far as it wicks really well. Just my opinion but there is a thin line between wicking great and being just plain terrible, using cotton never had one issue.
  14. Mark Todd

    Fogger V2...WOW

    Hopefully tonight if I don't throw it through the door first :D
  15. Mark Todd

    Fogger V2...WOW

    I got one today and be careful if you buy one, as it comes it will short out on your device if the adjustable pin is in just a fraction to far, it's bloody dangerous to be quite honest! However, in the pack of spares there are 2 small O rings, take the 510 pin out, pop one of the O rings in...
  16. Mark Todd

    Micro Coils to increase Vapor, flavor & TH

    Needle was in place for as much as possible but the origin with the lip on the deck and............sod it, just making excuse now ;) I'll get there :)
  17. Mark Todd

    Micro Coils to increase Vapor, flavor & TH

    Was worried it wouldn't wick well due to only getting a supply from one end but seems OK at 10w. I'll wait till I've learned a bit more and can actually give a proper tutorial rather than a me pissing about video :D
  18. Mark Todd

    Micro Coils to increase Vapor, flavor & TH

    OK, wrapped round a 1.2mm needle (16g) with 10 wraps of .3 Kanthal (think thats 28AWG) and coming out at 1.4ohms Bit of a pita on the Origin dripper but nice :)
  19. Mark Todd

    Micro Coils to increase Vapor, flavor & TH

    Just wanting to clarify as this was really my take on how they worked, rather than asking anyone to rewrite the book, if you have watched my video (3rd party insurance will cover any pain caused!) then am I way off track?
  20. Mark Todd

    Micro Coils to increase Vapor, flavor & TH

    You calling me fat :D By my own admission, I know very little about micro coils, only what I've seen on other videos and discussed on other forums, my video was a more "this is happening, try it" type affair. I've read through pretty much all this thread now and will do go tinker now and see...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu