Search results

  1. Tor R

    Shinyitis Support Group

    Good morning ladies and gentlemen, I've been training, an hour on the spin bike. Now I'm going to have a coffee and a vape before I end up in the woodpile again. 3 attys will have coil and wick tonight as well
  2. Tor R

    Boro Mod's, Tanks, Attys And More

    What did you end up doing to get that solution?
  3. Tor R

    Boro Mod's, Tanks, Attys And More

    I will have the same panels on the lime green dot. My White dotaio v1 will also get the same style panels, atty I'm not sure what I'm buying, must be very good at mtl is a condition though. Maybe one more Sturdy One, maybe a dotshell in a different color...or maybe a new atty has arrived before...
  4. Tor R

    Shinyitis Support Group

    Another project is taking place, LV Grus will get a dna 75 c chipset. Some people say just fit the 75C, I found that the LV screen was a bit narrower than the 75c screen, the stanley knife will be next step:
  5. Tor R

    Shinyitis Support Group

    Does anyone know when 2FDeal will run store-wide offers again? Must have some bb and dotaio panels etc. before too long.
  6. Tor R

    Shinyitis Support Group

    Good morning folks, BB project II, have to make a small pom part on the left side of the screen, the rest of the plan is swirling in my head...
  7. Tor R

    Boro Mod's, Tanks, Attys And More

    Thank you very much mate for the kind words, T. This is how my three BB will be, mostly we regularly go over the bb to check for condensation, juice etc, and removing the screen cover is the least demanding to work on. Atleast we don't need to be afraid of these max 20 reconnections of the...
  8. Tor R

    Boro Mod's, Tanks, Attys And More

    The plans to make a simple link for bb and some kind of connection to the billet box dongle, turned out a little different and easier than I imagined. Stealth Vape dongle with fixed pins is a free item when we buy either DNA 60 or DNA 60C from them. Header is a 5 pin Connfly Socket Pin Female...
  9. Tor R

    Boro Mod's, Tanks, Attys And More

    Thank you very much for the tips, really appreciate them. I'm going to build three atty's tomorrow for the mod, I always tighten the coil screws hard. But I have to train myself to follow how we get information from the dna on the screen as you have explained.
  10. Tor R

    What's happened to the hobby?

    My first Dicodes chip has passed 105,000 puffs, the only thing I've had to change is the screen which failed at 70k puffs, that said, it has been in the ground many times, which led to some design changes on the stabwood, and may also have been a reason why the screen said thank you and goodbye...
  11. Tor R

    Shinyitis Support Group

    Good evening folks, Then the parts are slightly different: Not sure I'll polish them up with a finer grade, they're not perfect but good enough for my use. Next week it looks like there will be two packages from AliExpress, in one there will be more sanding and polishing for me lol
  12. Tor R

    Boro Mod's, Tanks, Attys And More

    I don't have much experience with dna chipsets, I have Centaurus dna 250c which I never use, a jac dna75 which I also don't use due to weak 510 pin, and now bb with dna 60 which I use quite often, the last one I haven't fitted in cable connection so I can not connect it to escribe. The glitch...
  13. Tor R

    Boro Mod's, Tanks, Attys And More

    Now I don't have the possibility to put it up against escribe since I don't have usb on it (yet), but I consider the glitch to be microscopic. As I said, I have been very satisfied with how the dna is in TC. I wouldn't have seen it if it wasn't for the setup on the screen being: 1, resistance 2...
  14. Tor R

    Shinyitis Support Group

    good morning folks, I'm bucking firewood with the chainsaw, in other seasons I've had a tractor to twelfth the logs, this year it's going to be on the ground something the backs are talking about. Well, aside from housewood, weekend project is:
  15. Tor R

    Boro Mod's, Tanks, Attys And More

    But all that said, DNA 60 has grown on me, superb vape quality and became very stable when I threw the hybrid drip tip. I experience, but very rarely, that it sometimes goes over the wattage I have set, why it has that type of glitch I have no idea, 99% of the time it is dead stable in the way...
  16. Tor R

    Boro Mod's, Tanks, Attys And More

    Got three chipsets from SV in the mail today, one is DNA60C, there is not much you need to make so that the screen fits in a BB, so this will end up in my BB project 2. All this talk about the protection on the Evolv chipset, DNA 60C, I will take pictures when I get time, but the person who...
  17. Tor R

    Boro Mod's, Tanks, Attys And More

    The second thing you can do if you use rayon again is to put a small skein of extra rayon in the juice port, add until you stop having leakage. Everything doesn't have to be super nice as long as it works.
  18. Tor R

    Shinyitis Support Group

    Good mornings gentlemans & ladies, Vape mail: On the left is the 8 pin flexi screen extension cable + connectors, DNA 75C, DNA 60, DNA 60C. 75C should be in a LV Grus, DNA60's will go to bb’s. I didn't originally plan to use the DNA 60C in one bb project, but it seems to be an easy adaptation.
  19. Tor R

    Boro Mod's, Tanks, Attys And More

    I don't know the atty and the wick channels, but looked at the reviews, if it's the same atty that Todd's review had, there are adjustment screws at the juice channels.
  20. Tor R

    Shinyitis Support Group

    It's not a good financial end result, between 180-200$ I feel it ends up at. Frame is 50$, inner panels 19$, outer panels 19$, screws 6$, switches & wires 51$, dna 60 around 49$. If, on the other hand, you choose to buy original bb switches and cables, it will be much more expensive, that said...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu