Search results

  1. BJ43

    The "WeekEnder"

    Raptor set at 5v on the ECD. Clic pic for video..
  2. BJ43

    The "WeekEnder"

    My Raptor 20 amp weekender with the 4200mAh 65C is temporally tacked together for flight testing. Russian with the R41 1.32 ohm coil. At 25.1 watts was a little more than I like. !7/18 watts is great.:) waiting for a female balancing plug to finish it.
  3. BJ43

    The "WeekEnder"

    I have been doing it a long time...:) No sweat factor just common sense and caution. It brings a balancing harness.
  4. BJ43

    The "WeekEnder"

    Got the 4200mAh 7.4 v shorty in for my Raptor weekender. Popped it open and it has 4 2100mAh cells. two paralleled packs then those 2 packs in series. The 4 cells measure 85x43x23, not bad for 4200mAh 7.4v or 8400mAh 3.7v.
  5. BJ43

    The "WeekEnder"

    Another Groove board weekender. The hard case forms the box and a little RC plywood with carbon vinyl should finish it off...:)
  6. BJ43

    The "WeekEnder"

    The top one is mine with the wires soldered....:toast:
  7. BJ43

    The "WeekEnder"

    They sold out real fast..
  8. BJ43

    The "WeekEnder"

    "wow, he can talk. I thought he only grunted and moved his head.":D
  9. BJ43

    The "WeekEnder"

    We had a power outage last week and my PC, TV, i-pad were shut down, and it was raining, so I couldn’t golf. Therefore, I talked to my wife for a few hours..... She seems like a nice person.;)
  10. BJ43

    The "WeekEnder"

    Yes, I am going to mount the balancing cable so that I can plug in an extension and use my external charger.;) Thanks for all your help mamu.
  11. BJ43

    The "WeekEnder"

    I was able to solder the tiny caps and finished wiring my raptor 20 amp. Tested Russian at 1.3 ohms on it at 3.3v to 6.1v. Waiting for my lipo battery and a pretty 510 connector Mike recommended and stuff it all into the box.:)
  12. BJ43

    The "WeekEnder"

    No switches needed on the Tibs, just buttons and baps said he would design them for shapeway to make them. We need battery connecters and 510 connector. Don't think shapeway offers discounts, but we may save on individual shipping if we combine some other odds and ends. I would like to see...
  13. BJ43

    Just hemp

    Ditto>> Completely different plant. I have flight physicals every 6 months and purposely told the doctor to look for it and Zero, nada...:)
  14. BJ43

    Raptor Flip-Top VV Mod with 20A, 120W dc/dc converter...

    Yep and 70+ fingers and eyes don't help. Can other caps be used on the raptor, some with wire that can be soldered to the pins?:)
  15. BJ43

    Raptor Flip-Top VV Mod with 20A, 120W dc/dc converter...

    I received these caps from Mouser. Sure are tiny. How do I solder these parallel? Is there a pos/neg side to them? C3225X5R1C226K250AA
  16. BJ43

    The "WeekEnder"

    Got one of these also, I think you recommended it. My 350 batt rattle in it so I had to put an Oring in it. I like the switch better than the Origin. Wish I had ordered the 18650 tube, but I doubt it will take a kick.:)
  17. BJ43

    Just hemp

    Here is a hemp wick thru coil that has been on a dripper for over a week. Second pic is same wick rinsed in just water. Still soft and pliable.:)
  18. BJ43

    The "WeekEnder"

    Got it apart and will look for a better spring tomorrow...:)
  19. BJ43

    Just hemp

    You have to be more specific. we use, hemp twine, fiber, and cloth. Which one are you calling stiff? Was it filler or a wick thru the coil? I have never experienced any stiffness after use and I have some in a fogger that is over a month as filler around a vertical coil.
  20. BJ43

    Just hemp

    It is nothing like cotton. I also dislike cotton and went to bamboo which was better until I discovered hemp. Or maybe until I rediscovered hemp...:D
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu