Search results

  1. BJ43

    Raptor Flip-Top VV Mod with 20A, 120W dc/dc converter...

    @mamu: Could an IC comparator be used to control the gate of a 20 amp P mosfet on Vin and in this way make a LV master cutoff for the raptor 20 amp? This would eliminate the zener as your voltage cutoff would be on the Vin and never let the batteries totally discharge if left idle. Looking at...
  2. BJ43

    Oh the switches! I'm so bored.

    KSJ0M21180SHLFT | KSJ Series 7.62 x 5.08 mm 200 g Spherical Actuator Tactile Switch | C & K COMPONENTS - Future Electronics
  3. BJ43

    Mike n Tibs DNA Mods!

    For those using a Taifun or similar on the Tibs. http://www.e-cigarette-forum.com/forum/atomizer-mods/567962-wicking-capilary-action-taifun-type-rba-new-post.html
  4. BJ43

    Wicking (Capilary action) on Taifun type RBA

    I have been using 6 Taifun GTs almost exclusively for the last few months with horizontal micro coils. Every time I rewick them, I wonder what is the best length to leave the wicks stick out the sides. Long, pressing on the tank, or flush not touching the tank wall? Back to my make shift...
  5. BJ43

    Just hemp

    Read from here forward. http://www.e-cigarette-forum.com/forum/atomizer-mods/378875-just-hemp-26.html#post12386763 Since I discovered both for wicks, IMO both are excellent and I now use both depending on the juice. Yes the hemp fiber is excellent but not the hemp sliver. The Ramie Top looks...
  6. BJ43

    Just hemp

    http://www.e-cigarette-forum.com/forum/atomizer-mods/558312-just-ramie.html http://www.e-cigarette-forum.com/forum/atomizer-mods/378875-just-hemp-26.html#post12386763
  7. BJ43

    Raptor Flip-Top VV Mod with 20A, 120W dc/dc converter...

    I bought 4 before they ran out....:)
  8. BJ43

    Raptor Flip-Top VV Mod with 20A, 120W dc/dc converter...

    Yes my two raptor pass thrus have a rated fire switch on the Vin..:) Use these in my truck off a 20 amp fuse.
  9. BJ43

    Raptor Flip-Top VV Mod with 20A, 120W dc/dc converter...

    Simplest would be a three pin socket with the jumper to one side on and to the other side off. That way the jumper would always be on the mod. Still I would like it to be automatic and fail safe.
  10. BJ43

    Just Ramie:

    I have never used PG unless there was some in the flavors I use...:) 6 years ago when I looked up VG and PG one was used in medicine and baking and the other was used for pet safe radiator fluid. Needless to say I went with VG and have used it exclusively.:D
  11. BJ43

    Raptor Flip-Top VV Mod with 20A, 120W dc/dc converter...

    My problem would be losing the jumper.:)
  12. BJ43

    Raptor Flip-Top VV Mod with 20A, 120W dc/dc converter...

    Still think that there should be a 20+ amp mosfet that would disconnect the current if the voltage got below a certain voltage controlled by a zener diode. :) I just do not know how to pick the right mosfet or zener.:confused: We used mosfets with high amps as fire switches activated with small...
  13. BJ43

    Raptor Flip-Top VV Mod with 20A, 120W dc/dc converter...

    LOL, I was going crazy.....:D
  14. BJ43

    Raptor Flip-Top VV Mod with 20A, 120W dc/dc converter...

    Mamu I understand your diagram, what I don't understand is why you say we don't need a high amp slide switch. If i use a .4 ohm coil at 30 watts, that is 8.6 amps. The main reason I wanted the raptor and 20 amps was to try low ohms and these can be very high amp users. I realize that the input...
  15. BJ43

    Just Ramie:

    I quit gennies when I started liking higher amps and realized SS added a very distinct taste that I did like after I tried organic wicks. They just could not keep up with my long double draws. I was also a closer to the tip enthusiast for a long time, but at these higher watts I like it further...
  16. BJ43

    Raptor Flip-Top VV Mod with 20A, 120W dc/dc converter...

    Mamu said: Good news is that, like the fire switch, with the master kill switch tied to on/off control you don't need a rated DPST on/off slide switch. Without having to have a rated slide switch you should find these readily available and in smaller sizes. I still don't understand this as I...
  17. BJ43

    Raptor Flip-Top VV Mod with 20A, 120W dc/dc converter...

    I still don't see it....:confused:
  18. BJ43

    Mike n Tibs DNA Mods!

    They tend to use the same case on several mAh The 5000 has the same case as the 6000.
  19. BJ43

    Mike n Tibs DNA Mods!

    Don't know if the 6400 mAh will fit the Tibs with those larger bullet connecters, and the actual size could be a little larger. The 6000 is a pretty exact fit in the Tibs lipo.
  20. BJ43

    JUST TOBACCO, no perfume, no caramel, no vanilla, no tba

    Jimi D, I think it was you that posted a link for me with a spreadsheet that had all the Inawera flavor with a short description and recommended dosage. If you can will you post it again. Thought I saved it on my desktop but it won't open now. Thanks..
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu