Search results

  1. VapinSweetZ

    volt at max current?

    it looks like the vtc5 cant output 4.2-3.7v even at 20a, and it reach 3.3v in about 40%: Fake VTC5 Information - Imgur does all batteries acts like that? for example aw 10a will have this problem when firing at 10a ? thanks!
  2. VapinSweetZ

    Complex concentrate brands?

    Emm... honestly pina colada and apple pie are good and bad examples, its good because it is a "complex mix" but it's really common flavor and most brands already carry that (TFA, Capella and such), but they usually offer maybe 10 complex flavors like that. If you'll look at oneononeflavors...
  3. VapinSweetZ

    Replacement magnets for Copper Hades clone?

    Thanks but their Hades magnets doesnt fit the Copper version. http://fatdaddyvapes.com/eBay/Photos/BadHades.jpg
  4. VapinSweetZ

    Complex concentrate brands?

    Hi, I heard of "One on One Flavors" on Reddit and I kinda liked some of their concentrates, Are there more brands that makes eliquid concentrates with complex flavor (not just 1 flavor) ? Thanks!
  5. VapinSweetZ

    Authentic mods under $100 ?

    I found the Ares by Chief Vapers (Philippines) for less than $100, Are there other authentic mods under $100 ?
  6. VapinSweetZ

    Finally got to try Castle Long and Mother's Milk

    i'm with the op, "premium" is overrated, there are many small shops and new brands that makes great tasting liquids for half the price, it's not science its just mixing flavors with the right ratio (you don't need to be stephen hawking to make food/drinks at home). on the other hand, there are...
  7. VapinSweetZ

    Replacement magnets for Copper Hades clone?

    Hi, I need help from people that actually got replacement magnets for Hades and can tell me from their experience, As far as I see, the Copper Hades clone have tighter space for magnets inside the button piece, and the magnets from my SS versions doesn't fit it, Do you know of any online store...
  8. VapinSweetZ

    Where do I get replacement O-Rings ?

    Few RDAs I have need new o-rings (patriot, mephisto, omega, magma, 28mm tobh) Is there a place (even something non-related to ecigs) that carry compatible o-rings? Thanks!
  9. VapinSweetZ

    GPlat vs. Hotwires?

    On their site, the red package is the basic one, blue is Elite and Green I think it's the newest one but only comes at 20 gauge. Products | http://vapinology.com
  10. VapinSweetZ

    GPlat vs. Hotwires?

    From what I read it's a mixture between Nichrome and Kanthal, that's not bad (although still doesn't worth $1.5/ft IMO).
  11. VapinSweetZ

    Nichrome disadvantages?

    What's the disadvantage compare to Kanthal? All I know is that Kanthal have a "cleaner" flavor, and that Nichrome, in some cases (dunno when) can get melted. What are the differences between Nichrome 60 and 80 ? I know the resistance with 80 is lower and it's build with a different ratio of the...
  12. VapinSweetZ

    GPlat vs. Hotwires?

    I placed an order with the red and blue 26g, I'll try to compare them to a regular Kanthal (Vapowire) and post my personal impression, I guess in about a week.
  13. VapinSweetZ

    GPlat vs. Hotwires?

    26 gauge, which one is better? which one have a lower resistance? BTW, is there any comparison chart of their resistance in comparison or Kanthal A1? I kinda wanna know what to expect before I'm getting them. Thanks!
  14. VapinSweetZ

    Is it possible to fix a leaking AGA-T7 ?

    I know the Fogger may leak due to poor wicking, but I tried to re-wick my T7 few times with no luck, when the tank is on the side or in an angle it's leaking out of the air hole. It's not just after filling and it's not happening to me when the mod is upright (but honestly I only use tanks...
  15. VapinSweetZ

    Need help with a Chi You clone (recognize the manufacturer and find out if I can disassemble the button)

    MrPlink - I don't know on what load you meant that but with a 1.3ohm the drop is ~0.3 ohm and it's probably due to the age of the mod, I got it about 2 months ago and never cleaned it with alcohol, I guess I can get it to about 0.25ohm after cleaning. crxess - I'm not sure how is it possible to...
  16. VapinSweetZ

    Need help with a Chi You clone (recognize the manufacturer and find out if I can disassemble the button)

    A. Does any one recognize this clone's manufacturer? B. Is it possible to take apart this firing button? Thanks!
  17. VapinSweetZ

    Any way to fix the Nemesis clone fire button (stuck sometimes at the beginning of the tube)

    With the original positive screw I can't use the beauty ring, the negative screw doesn't change anything.
  18. VapinSweetZ

    Any way to fix the Nemesis clone fire button (stuck sometimes at the beginning of the tube)

    Thanks but that's not my question, the button isnt too low, it's in an acceptable location, the problem is the button and the tube, how can I fix this issue, should I sand the end of the tube from the outside, the end of the button from the inside? Any other trick?
  19. VapinSweetZ

    Any way to fix the Nemesis clone fire button (stuck sometimes at the beginning of the tube)

    It's with the beauty ring on for the Fat Daddy upgrade kit. Right now I'm with Sony VTC4/5, with AW it's even worst. I only have 1 atty that have a really positive screw and works well, I can take the positive pin of the Nemesis a little big higher and then the firing button will sit nicely...
  20. VapinSweetZ

    Any way to fix the Nemesis clone fire button (stuck sometimes at the beginning of the tube)

    With most of my attys I can't screw the fire button all the way in, and when it's a little bit out, sometimes (actually most of the time) the firing button stops at the beginning of the battery tube and doesn't close the circle. Any tips on how to fix that? I thought maybe to grind/polish the...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu