Search results

  1. turbocad6

    Turbocad's finally selling mods :)

    yes, the contacts will always arc as the connection is made and broken, especially when broken, but this is inevitable. the difference is, as Rossum says, first of all for it to be a material that withstands the arcing well, and of course this means both sides of the contacts of which a battery...
  2. turbocad6

    Turbocad's finally selling mods :)

    well yeah, technically not so much surface area but cross sectional area or overall mass really is more correct when it comes to the conductor, surface area itself does make a very big difference on contact points themselves, well actually not so much surface area, but specifically contact...
  3. turbocad6

    Turbocad's finally selling mods :)

    yeah as Rossum has already said, the make/break contact point absolutely can not be on the battery itself, and yes, also as he has said the biggest benefit of silver is not so much the difference in conductivity, it's simply the fact that the oxide layer that does inevitably form is actually...
  4. turbocad6

    Turbocad's finally selling mods :)

    and yeah, a mosfet is not a mech, heck many will not even consider something a true mech even if it uses wires as opposed to mechanical strips, personally I don't think that is true, an adequate wire is equally as effective, but mass perception doesn't see it that way I guess :)
  5. turbocad6

    Turbocad's finally selling mods :)

    yes, I wholeheartedly agree but so many guys are so centered on cost that I was considering maybe having this be an optional upgrade to full solid silver guts for maybe $25-$30 or so, for so many people out there a small difference in price like this can actually be a pivoting factor... it's...
  6. turbocad6

    Turbocad's finally selling mods :)

    yeah I have considered maybe doing a mosfet version too, but not VV, to me by the time I build in VV circuitry then might as well just make it a fully chipped mod, but a mosfet may be a possibility I'm considering too.. as far as price it's a little too early to tell, but it will not be a...
  7. turbocad6

    Turbocad's finally selling mods :)

    I have no idea why each picture shows twice but at least there is the ability to upload pictures now that can show full size, that's pretty new here I think? never used to be able to do that, makes it MUCH easier to upload pics so I will upload some more pics soon from the past few batches here...
  8. turbocad6

    Turbocad's finally selling mods :)

    hey guys long time no thread bump :p I'm of course still here and still building mods in batches, as always if anyone is interested in a mod PM me and I will do what I can for you. I actually have an extra DNA75C mod or 2 available for sale right now if anyone is interested. also, many who know...
  9. turbocad6

    Turbocad's finally selling mods :)

    ha, famous last words :P looking good, thank you doffy too for the pics :)
  10. turbocad6

    Turbocad's finally selling mods :)

    wow, awesome pics Ivan :) thank you... glad I was able to get you into a mod so quickly you were prolly one of the least wait times out of most others tbh, timing is everything I guess :)
  11. turbocad6

    Turbocad's finally selling mods :)

    hey guys sorry for my absence in this thread been visiting and monitoring but haven't had much time to post, been a pretty hectic month for me, hey Aal whats up :) anyway, all mods from this batch have already shipped and you should have received tracking through email and be receiving it any...
  12. turbocad6

    Turbocad's finally selling mods :)

    damn doffy good eye that one is yours you are #3 on the list, #1 starts at rear left corner :) Ivan, send me an email at my user name here @mindspring.com, I have a few extra mods I built in this batch I'll let you know what I have and we work something out buddy, no need to drive up :)
  13. turbocad6

    Turbocad's finally selling mods :)

    ok I got all the mods in the current batch up to what I call "ready for electronics install" for me that means all machine work is done, mods are all put together with doors and chip covers, squonk holes are cut, mods are all shaped and sanded and I am up to the point that I am ready to start...
  14. turbocad6

    Turbocad's finally selling mods :)

    ha, ok after new year :P I'm still working on finishing up the faceplates then on to doors this weekend :)
  15. turbocad6

    [CLOSED}

    hey man I'm not sure if 3D printed ultem is similar to regular ultem 1000 but be careful when trying any kind of Cyanoacrylates, it causes it to crack and craze! I use 2 part epoxy for magnets, it sticks pretty well to it
  16. turbocad6

    Turbocad's finally selling mods :)

    rudy bro same to you and everyone else here too :)
  17. turbocad6

    Turbocad's finally selling mods :)

    yeah fairly close to half way at this point, prolly start to have some pictures start coming up after christmas :)
  18. turbocad6

    BOTTOM FEEDERS= a place for everything modified and/or custom made

    honestly when it comes to mods I don't think paint really has any place on them. paint is just never going to be durable enough unless you really baby the mod. now powder coating on a metal mod may not be so bad I guess, but even there it's prolly only a matter of time before it starts to get...
  19. turbocad6

    [CLOSED}

    crap really sorry to hear that. def one of the biggest fears is not having the tools necessary to do the job at hand and your hands are without a doubt your most important tool of all man, hope for a speedy recovery bro
  20. turbocad6

    Turbocad's finally selling mods :)

    hey mermaan no, the red is not ultem it is acrylic and is fine really for a door or chip cover but not available as the main body, only trim items. I do plan on playing around with dying some ultem when I get a chance to play but just haven't had the time to play with it yet and do some testing...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu