Search results

  1. ccwaters

    The Hurricane RTA (Fasttech clone)

    I was just checking through some tanks, the Junior seems to be threaded the same as the Taifuns, though the Taifun tanks are very slightly larger, and the chimney is about 3/8 inch to short to work on it. That is the only thing I really don't like about the Junior is the tank would like to see...
  2. ccwaters

    The Hurricane RTA (Fasttech clone)

    I have the SJMY Junior, a full sized Tobeco, and an unknown full size, the SJMY junior has smaller threading on the base then either of the full size, so unfortunately the SJMY tanks won't fit the full size Hurricanes.
  3. ccwaters

    Augvape and Roxy Boreas RTA

    GB is slowest of the China bunch for the 40 or so orders I've done with them, typical ship time is 10 days even for "in stock". I've also had very bad luck, 36 of the 40 had missing or broken items. I've had numerous CSR exchanges with them which have taken a month or more between responses...
  4. ccwaters

    Merlin by Augvape and Roxy

    You can add the Ubertoot to your list, I believe it was very influential in the design of the Merlin, It was one of Roxy's favorites for quite some time. I still have 3 of them, great tank Vape is very much like the Merlin with less air flow.
  5. ccwaters

    Taifun GT Discusion!

    Yes the wick inside the chamber is sort of a reservoir, surface tension along with the negative pressure in the tank only allows enough juice into the system as needed to keep it saturated. When the wick is through those slots you have to be more precise with wicking, too much and you create a...
  6. ccwaters

    Tootle Puffers, Part Three! (The Sequel of the Redux)

    Been watching the Old faithful live feed off and on over the last couple days there be white stuff on the ground it won't be long:blink:. When it gets over 80 degrees I start to melt National Park Service Webcam
  7. ccwaters

    Taifun GT Discusion!

    Tail length can vary quite a lot with this style of wicking, I've never jumped on the Rayon band wagon either, I have some, I just never saw the advantage in it other then in the Erlkonigin which is all I used in that. Only real notable difference I've personally noticed is a few less pulls...
  8. ccwaters

    Taifun GT Discusion!

    The build is pretty much whatever your preference, I pretty much always prefer larger then smaller coils. Important part is keeping your wick saturated to help prevent the juice from cooking/burning. Hope it works out for you.
  9. ccwaters

    Taifun GT Discusion!

    I'll let you know my thoughts on it, they have a free sample button you can get a 30ml bottle of 6mg base for about $3.00 (they charge for shipping) They claim to use NicSelect nicotine so that should be OK think I saw $30 for 500ml of 100mg, so $60 a liter is not horrible if its decent stuff...
  10. ccwaters

    Tootle Puffers, Part Three! (The Sequel of the Redux)

    So far I've had pretty good luck with China gold :thumbs: Besides aren't those current Petri rdas China gold already? Probably same thing on this one. Ordered the SXK version which looks pretty decent.
  11. ccwaters

    Taifun GT Discusion!

    ninja'd while responding ..:thumbs:
  12. ccwaters

    Taifun GT Discusion!

    I'd assume typo here and a misplaced decimal point. Indeed, anything over 30PG tears my throat up. Though I did just order a free sample of the following alternative to PG
  13. ccwaters

    Picture of Your Setup Part 3!

    Na, not a KS/supertank KS, its a Vapmod Xtank. Vapmod X-Tank 4.0 Review - Vaping360.com
  14. ccwaters

    Tootle Puffers, Part Three! (The Sequel of the Redux)

    Its kind of one of those things, don't regret the purchase, I'll pull it out time and again, but it will never make to the commonly used rack, and will mostly gather dust.
  15. ccwaters

    Tootle Puffers, Part Three! (The Sequel of the Redux)

    In the spirit of thread title. Stealth Tootle... Boost Labs Izi Clone on an 18350 Colibri, 1.2 ohm 2.5mm 28g variable air flow from 1x .8mm to 4x 1.5mm, tight MTL,- tight DTL. Tiny chamber provides excellent flavor. PEEK, Ultem, and 316SS. The chamber.
  16. ccwaters

    Tootle Puffers, Part Three! (The Sequel of the Redux)

    It is alright, not a favorite, fit & finish is pretty nice. Up to 6x 1.8mm air flow holes in the base, but a bit foolish since the air under the coil chokes it down quite a bit. I opened up the air flow under the coil, ended up being much better, still restrict it down to a tight MTL, but now...
  17. ccwaters

    Tootle Puffers, Part Three! (The Sequel of the Redux)

    Keep your eye on the gold plating of the positive post, mine started flaking off after a week or so :nah: Nothing nasty for juice either, good thing is it appears it may be SS underneath, never got around to stripping it, good little atty other then that.
  18. ccwaters

    Attack of the (Kayfun Mini V3) Clones!

    Yes, that is obvious, just making a statement.
  19. ccwaters

    Tootle Puffers, Part Three! (The Sequel of the Redux)

    Have it saved as a mono bmp but the forum software won't accept it.
  20. ccwaters

    Attack of the (Kayfun Mini V3) Clones!

    I assume many Kayfuns would probably include Pre- KF4 can't do that on those.
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu