Search results

  1. Paul.K

    Building RBA for Provari

    Bookmark this link, post #2. Looking at that chart you are vaping around 9-10 watts and that is where your preference is. When you change ohms then adjust the volts according to that chart. Id you go to 1.8 ohms then 4.2v shoud give you similar results...
  2. Paul.K

    Building RBA for Provari

    WTG GG. Your coil should last you long time. Mine usually last at least a month if not more. You will need to change out the wicks every once in a while. I replace my cotton once a week. Keep practicing and you will be an expert in no time. :vapor:
  3. Paul.K

    Building RBA for Provari

    The basic premise is that you want very even heating of your wick. Standard build or separated coils only heat the parts that they touch. It will be very hot where it touches the wicking materiel. Not ideal for cotton btw. Micro coils has a much bigger footprint for heating the wicking materiel...
  4. Paul.K

    What do you refer to your device as?

    I call it my mod but a lot of people around here have turned a verb into a noun. Is that your vape? How much was your vape? Sent from my cotton stuffed microcoiled Android unit.
  5. Paul.K

    Building RBA for Provari

    When I clean and re-wick I usually take all parts apart and soak in warm soapy water for about 10 minutes then rinse in warm water. If I'm changing juices I follow that up with some boiling water rinse for about 30 minutes.
  6. Paul.K

    Building RBA for Provari

    And this is why I love the KF's with my Provari (and Semovar). Taste and vapor production is very good and I don't have to rebuild but once a week. I love my mech's with rda's but the builds and batteries just don't last.
  7. Paul.K

    Building RBA for Provari

    I'm using 28 ga kanthal and the lower ohms heats up the coils faster. I like the lower resistance and my juice tastes better at 1.2 ish ohms. You can certainly try it at the higher ohms just up the voltage and you can achieve the same power (watts). Since you are using 32 ga I would go ahead and...
  8. Paul.K

    Vaping while driving

    I use two of these. Cheap and works great!!! :vapor: Cranie Yums – localvape
  9. Paul.K

    Building RBA for Provari

    This is my go to build for the KF for my Provari. I vape it at 3.4v which is about 9.63 watts. I find higher than that I get a burnt taste but as is vapes very juicey and just right for me.
  10. Paul.K

    Sony US18650VTC4: Where can I find some authentic ones for a good price in the US?

    Thanks, I've been waiting for this to get back in stock. Ordered 2.
  11. Paul.K

    How many tanks/delivery devices do you have in rotation?

    Starting lineup: KFL KF 3.1 Origen RDA by Norbert Patriot RDA On Deck: IGO-W with clear cap Retired: Protank 2 iClear30 Evod Aro AGI CE4 iClear16 Nimbus clone Carto tank
  12. Paul.K

    Provari V3?

    Also check craigslist. I got mine there for a killer deal. Sent from my cotton stuffed microcoiled Android unit.
  13. Paul.K

    ProVarinati Deaddog Saloon

    My kfl on provari mini @ 1.2 ohms. Kf 3.1 is on my semovar @ 1.4 ohms. I don't like to go under 1 ohm on the kf as i'd rather not melt my insulators. Sent from my cotton stuffed microcoiled Android unit.
  14. Paul.K

    Provari V3?

    I build my own coils on most everything I own. After a while you just kind of know what voltage worked well for a particular resistance and juice I am using. Sometimes I do forget and have to glance over at my voltage chart (takes 2 seconds). After it's set I'm more worried about the rest of my...
  15. Paul.K

    Provari V3?

    @VapoJoe86, For every single reason you stated I did not buy my Provari. Instead I bought something else that had VW and all the bells and whistles. That mod was shelved within 2 months for the lack of performance and overall satisfaction of my vaping experience. It's your call man, get what you...
  16. Paul.K

    Sony US18650VTC4: Where can I find some authentic ones for a good price in the US?

    Yes kidneypuncher is a good site. The others you listed I've never heard of and the last one looked like they were fake Sony's. Careful where you get em. There's a lot of fakes out there, even some b&m stores are selling the fakes.
  17. Paul.K

    Sony US18650VTC4: Where can I find some authentic ones for a good price in the US?

    Sorry bout that. There is one place I know but they are kind of pricey. Sony 30amp VTC4 18650 Battery Sony US18650VTC4 2100mAh - Kidney Puncher
  18. Paul.K

    Provari V3?

    For me even if they came out with a newer version tomorrow I wouldn't be mad. My Provari mini works flawlessly and am very content with it. Not even sure I'd get the newer one until I sold off one of my mods or it died (fat chance).
  19. Paul.K

    Sony US18650VTC4: Where can I find some authentic ones for a good price in the US?

    18650 Sony US18650VTC4 2100mAh High Discharge Flat Top [Sony US18650VTC4 2100] - $8.50 : Illumination Supply, Quality Flashlights and More! Not sure if this works but there was a coupon code "isopower". It may still work so try it.
  20. Paul.K

    Provari V3?

    :pop::pop: nope not necessary. Just get whatever makes you happy. :vapor:
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu