Search results

  1. ufosnowcat

    Why is it .......

    if you dont prime the coils, they will be dry in the beginning. they might have some metal or machine oil taste at the start other than that maybe you like a bit of gunk ;p
  2. ufosnowcat

    Uk 18650 battery suppliers

    thanks for the warning, i had that shop on list as a possible source for tanks, how are they doing in that regard? or is it a no go across the line?
  3. ufosnowcat

    Uk 18650 battery suppliers

    you could check the rest of europe ;p if i order from the UK its 2 days versus 1 from belgium or holland (and infinity from italy) that said it seems my usual sources are limited to the vtc 5 and hg2's ah here is a uk one they seem to have rebanded vtc4 (normal with a sticker on it :blink: )...
  4. ufosnowcat

    is 10ml e-juice daily too much ?

    i'm at 15ml a day it all depends on your setup, low ohms high wattage eqquals a lot of juice if you adjust the nicotine content of your juice accordingly there is no problem
  5. ufosnowcat

    day 2

    hi and welcome depending on your device, don't underestimate the 18mg nic juice. it was the norm on devices 3 years ago, but if you put it in a sub ohm tank at 30+ Wat expect some nicotine od symptoms :p (dizzyness sweathing ...) you can mix your juices to get in between strengths, or get...
  6. ufosnowcat

    Battery Wrap Question

    the main thing is to not have the positive pin get in contact with the negative body, councious/carefull handeling dous a lot on its own and everithing that can act as an electrical insulator can be used to patch up (stops electricity and can hanle some heat)
  7. ufosnowcat

    tank reccomendation

    don't rule out the sub ohm rta's, you put in wath you build single coil rta's tend to give you a lot of room, thinking serpent, bachelor
  8. ufosnowcat

    Movkin Luggy VT60W

    yes it is i don't see how you could do an horizontal one. you have the up and down leads and 4 juice holes around someone will probably manage but i'm not that good ;p that being said i did a 4 mm but i'm guessing it could fit at least a 6mm coil btw with my overstuffing the cotton it didn'...
  9. ufosnowcat

    Ended Win again! 100 x Movkin Luggy VT60W & 100 Mini's up for grabs!

    did a build on the RDA more pics :) Movkin Luggy VT60W
  10. ufosnowcat

    Movkin Luggy VT60W

    the RDA top screws off revealing the neg post screw and an off center hole positive post screw is in the bottom this is how it looks with one of the coils in the goody bag the coil in the goody bag are just over 3mm (top) i made a 4mm 24ga kanthal a1 6? wraps the short end of the...
  11. ufosnowcat

    Ended Win again! 100 x Movkin Luggy VT60W & 100 Mini's up for grabs!

    check the link :p Movkin Luggy VT60W
  12. ufosnowcat

    ECF Giveaways - shipping updates

    it did collect a lot of stickers along the way
  13. ufosnowcat

    Ended Win again! 100 x Movkin Luggy VT60W & 100 Mini's up for grabs!

    my luggy artived today :) Movkin Luggy VT60W
  14. ufosnowcat

    ECF Giveaways - shipping updates

    mine just arrived in belgium :) Movkin Luggy VT60W
  15. ufosnowcat

    Movkin Luggy VT60W

    edit window seems to have issues with copying images oh well tank taking a bath, the left one (it did have a faint machine oil smell) threading is smooth the drip tip has a spiral in it starting at the top airflow hole (i dont usually use top airflow so i dont know wat that will give)
  16. ufosnowcat

    Movkin Luggy VT60W

    after the bath (see below) i filled it up with my normal 60%vg slight spittle ferst few draws airflow is nice less than the tfv4 but more than the toptank mini ill give more info later
  17. ufosnowcat

    Movkin Luggy VT60W

    hi all i was one of the winners of the Luggy contest here on ecf And it arrived today :) in the mail asking for our shipping info movkin stated that they would be sending color and sizes randomly, i figured it wouldent hurt and asked if it could be a big black one. and i got ... a big black...
  18. ufosnowcat

    Advice Please! DIY Flavor Extraction - Glycerite Method

    thats actually on my to do list of things to try next (making my own flavours) bu there is not that much info to be found (not where i was looking) most seem to be using alcohol or pg to extract the flavours do tell me more :smokie:
  19. ufosnowcat

    Say Hi to the New

    hi and welcome there is a lot of info here, have a look around and if/when you have questions, ask away :) if you update your profile with your location questions on where can i find ... will get you better results ;p
  20. ufosnowcat

    Hello

    hi and welcome wat Sir2fyablyNutz said ;) + have a look around and/or just post your question here, you'll get help :)
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu