I just keep all my batteries AW IMR for simplicity's sake. The only time I look at it is when I use a 18650 in a mech mod to make sure it is the 1600mah version, but even then I don't worry much if it is not...
the low ohm ppl set up are usually for mechanical devices so they can push a lot of watt through it. VV and I assume VW devices should have safety limit that prevent extreme use (kick is only 10 watt, not sure about darwin or possibly other VW devices).
normally with DID we are talking about...
same as any atty. there is no difference. we adjust voltage for the ohm, you set the watt and let them calculate the ohm. The atty provide that ohm number that's all.
There is plenty of ppl using DID on VW devices/kicked. Probably not really noticeable since it really doesn't matter.
6 wraps 32ga kanthal on a good size wick measuring at 1.4ohm seems too low... pull wick up a little bit? it is probably shorting somewhere.
I have had wicks that are wicking great but flavor was not as intense as I liked. I determine it seem to be too saturated and pinch the top slightly which...
I agree with you guys on principal about ppl flipping, but I also don't believe there should be rule/policy on what is a justified profit. People put time following release dates, stay on list and often time, money in it for months before they see it. I would be surprise the forum would want to...
cutter has no radiator pluid color tho
personally would love 10mg, but if cutter will be readily available, it would be just fine (but he said during the benefit sale that we may not see it for awhile or something like that :( ),
w/v = a
so a 3.5 a device like Provari can handle such as 14/4=3.5,
w=v2/ohm
so something like
4 volt battery running 1 ohm coil = 16 watt. 16 watt / 4 v = 4 am, which is over the 3.5 amp limit of provari so it wont fire.
other devices may have a larger amp limit which will be ok. Provari...
regardless, I suggest you go buy a few mini quartz tank from kcos (hoh is oos) anyway... while juice is not your enemy, hard surface is and you don't want to be seeing this :) (I am waiting for them to arrive... oh what a horribly long wait :( )
Replacement Fused Quartz Tank - Mini
all depends on how you roll. some roll thin wall wick, some just roll it and get it to work first.
I routinely trim mine as I build the wick.
I would just get something that fit into the hole, oxidize it well and you should be all set. don't over think it... all that can come after you get a...
Got my large can of Cape Cod polishing clothes today. Gonna spend some time tomorrow polishing up my stuff and take pictures :)
Now that I have what I need to vape, gotta get them all pretty and stuff :P
Got my benefit pluid/cutter in today! Thanks!
half of the cutter will go in the 100ml, then the 30ml regular after awhile. Can't get to 10mg nic, but every bit help. more cutter or lower nic please :)
oh I so need cutter. I vape mostly 8-12mg nic and Pluid is definitely a bit much and I like full flavor Pluid much better than reduced strength. Larger size Pluid and cutter or just Pluid in 2 or 3 different nic strength would be awesome!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.