Search results

  1. autobiogphnation

    How do you vape compared to traditional smoking?

    The biggest thing is you have to have the will power to want to vape instead of analogs. Cig-a-like products like blu are not the greatest but sometimes it's the right start in terms of exposure. The start of anyone's vaping experience can be a lot of trial and error because initially you won't...
  2. autobiogphnation

    what's the deal with smok cartos??

    Didn't have too many issues with them when I used them. I used the short one at 2.0ohms (with holes already) with halfling ibtanked on my provari mini. I use all VG liquid. Since they were the short ones I was drawing with air holes covered on tank ring to help keep wicking good if flavor for...
  3. autobiogphnation

    Kayfun Ohm issues?

    Loose connection? Try tightening the center screw if you haven't. Or maybe on the inside the block shifted and narrowed the gap
  4. autobiogphnation

    kayfun lite build - HELP!

    you can either cut your cotton to length before placing the chimney cylinder on or put the cylinder on and cut then. first way, just see where it lines up to the channels and cut there. second way you just cut it to the height of the cylinder before you put the chimney top on, obviously if your...
  5. autobiogphnation

    kayfun lite build - HELP!

    Sounds like a wicking issue. Maybe too much cotton and it's blocking the channels. Is your draw tight? Maybe the wick is too much in the coil, was it really tight when you ran the wick through the coil? Sent from my Nexus 5 using Tapatalk
  6. autobiogphnation

    RBAs a nessosary for mods?

    RBA/RDA isn't necessary for a vv/vw, but they are definitely worth it provided you get a good build/wicking. When I got my ProVari, I was using clearos still and continued to do so for a few weeks. Then switched to cartotanks for a few weeks and now using kayfun. All were great. Clearos would...
  7. autobiogphnation

    I dont need big clouds, maybe I am weird?

    I like a medium cloud. If I get little clouds I'm disappointed, but I don't need them huge. I experimented with lower resistance builds and I had higher resistance builds doing almost the same but I didn't have to deal with the battery drain being so quick. I stuck with clearos and ego bats for...
  8. autobiogphnation

    Kayfun vs Kayfun 3.1 vs Kayfun Mini vs Taifun

    Kayfun 3.1 has airflow control and extra bottom chamber that collects juice if flooded. Kayfun lite does not have that chamber or airflow control. Both are 22mm sized. Kayfun mini is ego sized, has airflow control and has 3 setup lengths: dripper-about 25 drops, standard- about 3ml, long-about...
  9. autobiogphnation

    Kayfun nano quatz tank

    I got a good one for my black kayfun from a shop in Malaysia, but I paid more in shipping them for the tank haha. Plus they don't have the nano in stock now :( Sadly everyone else just seems to have the rainbow heaven ones which have been lose in the orings
  10. autobiogphnation

    Kayfun nano quatz tank

    I'm looking to find a better quartz bank tank for my kayfun. I've done two of those rainbow heaven branded ones (found them on eBay) and they're garbage... First one broke when removing steel during cleaning, and both had bad gaps between glass and steel as well orings are not tight fitting...
  11. autobiogphnation

    Top reasons why you started vaping and/or quit smoking

    1). My mother. She's on her eighth year battling breast cancer. I tried quitting cigs but kept falling so at least vaping is less harmful. She wasn't a smoker at all, so it's just me trying to take better care of myself.
  12. autobiogphnation

    kayfun base shorting out? not reading ohms, need help

    How about a picture? It is probably not a r91, because that's be a clone of kfl+, so many it is a 3.1. Can you unscrew the center pin and open the bottom chamber? Sent from my Nexus 5 using Tapatalk
  13. autobiogphnation

    kayfun base shorting out? not reading ohms, need help

    Oh then I'm not sure. I have the 3.1, sounds like you have a kayfun lite plus. Sent from my Nexus 5 using Tapatalk
  14. autobiogphnation

    kayfun base shorting out? not reading ohms, need help

    Is it a 3.1? Sent from my Nexus 5 using Tapatalk
  15. autobiogphnation

    kayfun base shorting out? not reading ohms, need help

    Check the center block to see if it's touching the negative. Screw holding center block in could have broken if you tightened it too much, happened to me before. Sent from my Nexus 5 using Tapatalk
  16. autobiogphnation

    Need some rebuildable atty insight

    I'm vaping my kayfun around 9 watts, it's not scotching. fact I used to vape at 6 watts prior to having a kayfun when using clearos. You'll just have to play around finding your sweet spot per your build. Also I recommend looking at a kayfun 3.1, that juice collection chamber is a life saver...
  17. autobiogphnation

    Looking to Upgrade Device

    Look into ProVari. Yes it's pricey, but quality is great and it's simple, what you set is what you get. I love mine (I have two) because it's simple and I personally don't needed crazy power, so these do it for me as I'm vaping around 9 watts. Sent from my Nexus 5 using Tapatalk
  18. autobiogphnation

    Need help choosing new tank

    I second a kayfun. I have two 3.1s and they're awesome! Sent from my Nexus 5 using Tapatalk
  19. autobiogphnation

    "Newish" to vaping

    Issue is most likely in your build, not your battery, so you may not need a mech. I've got a ProVari with kayfun with a 1.6 ohm coil set to 3.8v, that's just over 9 watts. Its not huge clouds, but the vapor production is great on it. I'm sure I could easily step it up some more and have clouds...
  20. autobiogphnation

    Do high end mods come with a COA?

    This is why companies have started with authenticity codes on boxes of products. I got some innokin, smoktech and vision items and they all had the scratch off codes on them, just punch it in on their site. Hell even the smok omnimeter had a code on the box. This why we have TRUSTED vendors...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu