Search results

  1. dj9928

    Eleaf Lemo II

    Well had quite the day today with my Lemo 2, Filled it up this morning, usual leaking but managed to get it cleaned up and working fine, got to work "NO ATOMIZER" on my iStick 30w, I changed the coil Sunday and it had been working fine. Luckily I always carry a backup and had an old Protank 3...
  2. dj9928

    Eleaf Lemo II

    I've owned my Lemo 2 for a month now and think its time to put it on eBay. Straight of I noticed resistance was all over the place, it simply would not fire at all on my iStick 20w even with a 1.8Ohm coil but worked fine on my iStick 30. For the first week it vaped fine, but since that no...
  3. dj9928

    Eleaf Lemo II

    Anyone notice the Lemo 2 simply will not fire on the 20w iStick? Doesn't matter what resistance coil, I have made 1.8 ohm coils, won't fire.
  4. dj9928

    Eleaf Lemo II

    I believe its 26, I have 28 and 30. I find it to thick for my liking, difficult to work with.
  5. dj9928

    Help with Kanthal wire and coil making?

    The secret seems to be with 28ga and the MVP make smaller coils, they seem to heat quicker, so tried a 1mm bit working like a charm but a pain to get the cotton through and I worry about it wicking correctly being so small
  6. dj9928

    Help with Kanthal wire and coil making?

    So it seems I have got 28g 3mm Kanthal.
  7. dj9928

    Help with Kanthal wire and coil making?

    I have 2 kinds of Kanthal wire, I am unsure which exactly, possibly 30 & 32g. One is very light and flimsy, on a 1.5mm drill bit about 5-6 wraps gives 1.8Ohms, it also heats up extremely quickly. The other Kanthal is very thick and stiff, 7-8 wraps on a a 1.5mm drill bit gives 1.2 - 1.5 Ohms...
  8. dj9928

    Need help with my Kanger microcoils?

    I have been building Kanger microcoils wth cotton for quite a while, Not sure what kanthal I have but 7-8 wraps give me 1.5 to 1.8, worked well on my old Vision Spinner, decent vapor and throat hit. However I recently upgraded to a MVP 20 watt and hit problems. Works well for the first couple...
  9. dj9928

    Is the Kanger verification website not working?

    I got a Protank 3, I want to verify its genuine, when I go to SHENZHEN KANGER TECHNOLOGY CO.,LTD and enter the code I am took to a page with chinese writing that translates as Sorry, you can visit the peanut shells Dynamic DNS nz315.vicp.net:81 not online, please try again later visit !
  10. dj9928

    Problems with protanks on MVP?

    Yes it must be an issue with them 510 threads being to long and restricting air flow. I used a multimeter, the spinner was slightly higher than what I had it set to. I set it to 3.8 it showed 4.1, the MVP on the other hand was all over the show like shorting out or something, couldn't get a...
  11. dj9928

    Problems with protanks on MVP?

    Right luckily I had a 510 adaptor and tried that no damn better. Its like its not heating enough. How would I test the output of these devices with a multimeter?
  12. dj9928

    Problems with protanks on MVP?

    Weird one this but I will try my best to explain. I've been using Protanks for ever, the 2 and 2 mini on my spinners no problem, on the MVP's they do not perform good at all. I have made my own microcoils and stock coils not difference. Put the coil 1.8 on my spinner amazing throat hit and...
  13. dj9928

    Is this a fake Vision Spinner 2?

    But what about the lack of a scratch card?
  14. dj9928

    Is this a fake Vision Spinner 2?

    I purchased this from a large chain b+m store here in the UK, I had issues charging it so thought it might be a fake, I wouldn't care if it was a fake and I paid half price or something for it but I paid full price £25 Its came with no scratch card, has white writing instead of black on the...
  15. dj9928

    Vision Spinner 2 charging probs

    Just got one of these today, stuck it on the charger it showed charged in about 1-2hrs, I got about 1 hrs use if even until the light turned blue, I googled and came across this thread, so I stuck it back on the charger and once it showed charged I turned of the charger and turned it on again...
  16. dj9928

    Dry burning kills protank heads?

    I've killed 3 in this past 2 weeks, same time I got this new battery.
  17. dj9928

    Dry burning kills protank heads?

    I recently got a new Vision Spinner, and even on 3.8v its killing my protank heads when dry burning them. Never had this issue on my old ego twist, even up to 4.8v wouldn't kill it. Any idea why this is happening? What I do is wash the head, dab it dry, then 3 second bursts while blowing...
  18. dj9928

    Protank heads don't fit?

    Here is a photo, the old heads have the yellow grommet, The new heads are also slightly thicker at the bottom allowing less air.
  19. dj9928

    Protank heads don't fit?

    Yes this is the problem, If I unscrew the Protank until its almost off the battery it works but its ready to fall off.
  20. dj9928

    Protank heads don't fit?

    OK my Protank came with heads with a little yellow rubber grommet, Apparently Kanger changed the rubber grommet to silicon heads because of burning issues, I have tried several heads both genuine and clones and neither fit correctly, Well I should say they fit but no air flow at all, like trying...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu