Search results

  1. LobsterGoD

    vaping above 50 watts

    you get used to it, but ya those drip tips can get fairly warm. As others have said try a delrin tip out.
  2. LobsterGoD

    Throat burn!

    With tanks you need to let the coil heads soak in your juice for about 10min after installing and giveing them a few primer puffs(w/o powering) doesn't hurt either, otherwise you will singe or burn the cotton and possibly end up with a hot spot. Try changing your coil head out, letting it soak...
  3. LobsterGoD

    Customization!!

    the rubber bands that go around your top cap and lock ring you're referring to are called vape bands, several shops sell them if you plug it into google.
  4. LobsterGoD

    Sore Lungs with certain juices

    trying to draw too hard on a tight airflow can also cause chest soreness
  5. LobsterGoD

    What's your evening vape or vapes?

    anything light and crisp, like a simple watermellon or honey dew.
  6. LobsterGoD

    RDA advice.

    For the time it came out it was regarded as one of the best, you gotta remember that was one of the very first rdas to hit the market along with the igo-w. By todays standards they are very outdated.
  7. LobsterGoD

    I just want to try sub ohm/Update

    I've heard of people using ego chargers to charge them, but i wouldn't for 2 reasons. 1. because its always best to use the specific charger for the mod if applicable 2. it would take forever to charge that thing on an ego charger. Also, if you do get into rebuilding i believe the cf sub ohm...
  8. LobsterGoD

    Are our coils clogging because of flavor, VG% or ???

    Like i said in the earlier post, stay away from oil based flavorings and homemade vg extracts unless you want to spend a fortune in replacement coils or go to rebuilding. Other than that, its a hit or miss game. I've currently switched to using only TFA flavorings because they taste the closest...
  9. LobsterGoD

    Are our coils clogging because of flavor, VG% or ???

    i have never had max vg juices clog my coils any worse than 50/50, my guess is it's probably the flavoring you're using. You may want to try a different brand.
  10. LobsterGoD

    Are our coils clogging because of flavor, VG% or ???

    It's definitely the over flavoring of the juice and yes you're right dark juices will trash a pack of coils heads faster than you can order new coils online. Generally unflavored juice doesn't do this and barely leaves any build up behind, but you would have to be using some pretty low grade vg...
  11. LobsterGoD

    How clean are you?

    I'm probably not as diligent as i should be, but i usually give my tube mechs a good couple cycles in my ultra-sonic every other week. My box mods just get wiped down with an alcohol pad every few days when in use, and my atties get cleaned whenever i rebuild them. I usually rebuild once a week...
  12. LobsterGoD

    It is impossible to go backward in vaping.What is your vaping journey?

    i would if i could just for the sake of not blowing through premium juice(when i do buy it), but find it hard to vape anything higher than a .25 on a mech or lower than 80w on a regulated device.
  13. LobsterGoD

    Space-Aged Atomisers

    you cant be serious...
  14. LobsterGoD

    Hot e liquid hitting my mouth

    If you want to vape at high wattage I'd say the best thing to do is just get used to it, I get spit back on my tongue all the time but that's because I run stupid low builds and use chuff style drip tips on my rdas. Otherwise, just turn your wattage down a bit and it wont happen as often.
  15. LobsterGoD

    e juice that doesn't taste like a sweet shop..please!

    Don't forget about diy, its easy, quick and cheaper than any premade juice. I've made a few really good tobacco liquids by doing a vg heat extraction on ryo tobacco and cigars in the past.
  16. LobsterGoD

    Difference Between Single and Dual Battery Configurations

    you got that backwards, series increases only voltage, parallel increases MAH and also splits the amp load across the batteries (in a perfect world equally). Parallel configuration will also decrease voltage drop a bit, usually .1v per 2x the batteries
  17. LobsterGoD

    What is this tube good for?

    I wouldn't use a vamo board, check out @Relayer1974 on youtube. He has a couple pretty good in depth videos about the vamo 40w and 50w boards. I'd probably just turn it into a sweet lookin double barrel mech.
  18. LobsterGoD

    Tried re-wicking for the first time

    I use about 1/4in strips to wick coils smaller then 3/32 down to 1/16 and about 1/2in strips to wick 3/32 and 1/8 coils. Should help, some times you have to do a bit of shaving but eventually you'll get it down perfect every time.
  19. LobsterGoD

    Space-Aged Atomisers

    Right, although i would like to see improvements in the materials we use for wicking. I always seem to have that little bit of juice left in the wicks that will never be vaped because its just slightly too dry near the coil. maybe some carbon nano tube weaved into cotton balls should be in...
  20. LobsterGoD

    I'm a hater, that's right, you heard me!

    lol i eventually get burnt out on my dessert/fruity flavors and vape nothing but savory flavors during those times. Right now my favorite is a 1:1 ratio of walnut and pecan with a few drops of hickory smoke flavoring.
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu