Search results

  1. 48lowes

    Petar K Method with a hybrid Wick

    I'm back today with some pics. PeterK The last thing I tried was 400-35mm tall X 30mm wide I used 4 wraps 32g kanthal @ 1.5 ohm. The o.d. of my wick was pretty tight to the 2.5mm hole EDO I've been filling it up to the top, it still doesn't really explain it, as I've drawn it down to over half...
  2. 48lowes

    Petar K Method with a hybrid Wick

    I've been a little busy as late. I'm pleased to see Peter K here on the forum. I will try my best to get that picture tomorrow, it really isn't that big a deal for me, I'm familar. EDO I have no trouble whatever with my coils, using Peter K's pointers makes it a breeze. I do think Peter K has a...
  3. 48lowes

    Petar K Method with a hybrid Wick

    EDO I'm in no hurry, I'll keep at it until get it or quit. Really I just try something I think of that's a little different from what I've done, do it, doesn't work, put it aside. Well I'm back at it today. I was going in the direction of less screen as things weren't getting any better by...
  4. 48lowes

    Petar K Method with a hybrid Wick

    EDO Today I did just about what you said and a few things different than what I was doing. I did leave a hole (straw), rolled relaxed, then I made it to fit perfectly into the tank hole ( in the past I was slightly smaller). I then made my coil just that little bit bigger to accommodate the...
  5. 48lowes

    Petar K Method with a hybrid Wick

    I'm using a H-E-V SS-GENESIS The juice works fine elsewhere but then I don't see the aftereffects of it either. I'll try discountvapers for the parts, I did manage to get screws at the hardware size 1.6 they only had one smaller, of course, not quite what I wanted but I'm back in operation. I...
  6. 48lowes

    Petar K Method with a hybrid Wick

    A picture will take me some time. I'm using some juice I made using a tobacco recipe tobacco absolute and grain then mixed @ 10%. I didn't leave a small hole. I've reread all of these posts and returned to the basement. In the process I lost the only screw I have for my negative attachment. When...
  7. 48lowes

    Petar K Method with a hybrid Wick

    EDO this ohm thing is in my mind an iffy deal. I really don't know If these mods are that accurate. But my 1.3 ohm (as measured by the gripper) worked fine until I think the battery went low and then I couldn't turn it back on. It worked fine in my z max as well. I saw a review on utube about...
  8. 48lowes

    cant get rid of hot spots

    jkim5708 IMO hotspot is due to excessive wire from the coil to the connection at the positive post. This can be cured several ways depending on what device we're talking about. Just an FYI that is give us a link to the zap so it's a ready reference. Peter K method for vertical coil and the...
  9. 48lowes

    Just a quick question about SmokTech DCT Clearomizers!

    lenze I see you've been patiently waiting for someone to reply. A little confusion on what you're using a clearomizer of carto. I'm going to assume you're using DCT dual coil cartomizer. just about everything you mentioned can be attributed to filling. When I fill a DCT I'll pull the...
  10. 48lowes

    Petar K Method with a hybrid Wick

    I don't get excited when things don't work exactly right for me in the e-cig world. I've got enough back ups now that I'm never at a loss for my next vape. So I've been trying different setups since my last post. Ive done a little reading on these ceramic wicks,the cutting edge and Scubadatdan...
  11. 48lowes

    stainless mesh on sale

    I received an email from the The Mesh Company From Jan 11th to Jan 31st there is a 15% sale on all e-cigarette mesh and wire materials. Offering Kanthal wires, Nickel chrome wires & Silver 99.99% wires alongside the ever popular #325, #400, #500 mesh materials. These wires will be included in...
  12. 48lowes

    Discount on stainless mesh

    I received an email from the The Mesh Company From Jan 11th to Jan 31st there is a 15% sale on all e-cigarette mesh and wire materials. Offering Kanthal wires, Nickel chrome wires & Silver 99.99% wires alongside the ever popular #325, #400, #500 mesh materials. These wires will be included in...
  13. 48lowes

    Petar K Method with a hybrid Wick

    EDO I rolled a solid wick. I've gotten the hybrid method down pretty well. I still cannot seem to get capillary action going. Even when I hold the wick down (6 o'clock) and tilted toward my mouth, I get a couple half decent hits then dry. I'm going to go try 50mm #500 mesh right now. Manwas I...
  14. 48lowes

    Petar K Method with a hybrid Wick

    I've read and read, all over ECF, it's putting these things together that an immeasurable help. So it just turns out that this will have to be my at home vape, no biggie. I've already lost the other screw so I won't have that problem again in the near future. I went with #500 screen and 28g...
  15. 48lowes

    Petar K Method with a hybrid Wick

    Sometimes I just don't pay attention. I will start over and go the 4 wraps of 32g. Also I'll wrap about 35mm of mesh wick. I have been busy trying this and that with varying success. In short I tried the 35mm of mesh rolled up like a straw. I have a hard time to get the initial capillary...
  16. 48lowes

    Petar K Method with a hybrid Wick

    EDO I was starting to catch on the the genesis tilt, then I was showing my son in law the insides of the beast, put it back together and then it didn't work. I just put it aside till today. What did surprise me was the voltage, I was expecting to be kicking things up to 4.0v or more, instead I'm...
  17. 48lowes

    Petar K Method with a hybrid Wick

    EDO Well I didn't really get to seriously working on things till this AM. With the normal fiddling around with 1st time process, I find these methods the answer to my questions. Let's just start out with one apparatus at a time. I'm using a VV 18650 Gripper and a rebuild able from the UK...
  18. 48lowes

    Petar K Method with a hybrid Wick

    EDO This is the thread I've been looking for. Bluegrasslover's method, what an innovative mind, simply amazing. The Unoxidized SetUp, very precise, meticulous, very clear. This guy deserves and atta boy for sure. I've got kanthal #30 #32 #33 #34, stainless screen in 8½" sheets, a new mini torch...
  19. 48lowes

    Kanthal A-1 resistance heating wire - 32 AWG - 0.20 mm

    doolak Alright, I'd like 20 meters A1 AWG 32 & 33 20 meters A AWG 34 48lowes
  20. 48lowes

    28 ga a-1 kanthal

    kwalka I just wanted to say thanks here on the board for this generous offer. The PP should be there. 48lowes
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu