Search results

  1. Liquidkam

    Eleaf Lemo 2 + SXmini M class problem.

    Update. My O-ring was sub standard (the one on top of the chimney). It was causing all kinds of wicking issues. This was the biggest PITA I have dealt with since I started Vaping. I guess no on here has seen this issue before judging by the lack of responses. If you're a Lemo2 user pay close...
  2. Liquidkam

    Eleaf Lemo 2 + SXmini M class problem.

    Huge help. Much appreciated.
  3. Liquidkam

    Eleaf Lemo 2 + SXmini M class problem.

    I have been using 70/30 from the start. Same liquid. My own mix. I know 50/50 wicks better but I don't think there ought to be a problem considering I have been consistent with the liquid from the start.
  4. Liquidkam

    Eleaf Lemo 2 + SXmini M class problem.

    As the title states I am having issues with my set up. Facts. When I got the Lemo I built a coil with 28 gauge nickle wire - 9 wraps at 3mm. It came out to .1 ohms and was stable as could be. Excellent vapor production and absolutely no issues for a month. The first coil needed to be replaced...
  5. Liquidkam

    Cloning Milk and Honey

    I am under the impression that there is some sort of sweetener in the mix. It seems overwhelmingly simple upon tasting it. Like banana cream, smooth, and super sweet. I think our brains invent crap sometimes and we make things taste like what we want them too. I don't get hazelnut or chocolate...
  6. Liquidkam

    Cloning Milk and Honey

    I had a bottle of M&H months ago 15ml 0MG Nic. I Vaped the whole bottle in a 14 hour day and loved every minute of it. Since then and up until now I have been reading this thread and haven't touched M&H. Today I just got in a 30Ml to taste again to see if I can help with this project. The first...
  7. Liquidkam

    Vape Mail and the resulting aftermath...

    As far as the joules are concerned it only reads in Joules in temp control mode. When in power mode (no temp control) it displays in watts. So I think it was a way for the user to easily identify if they are in temp control mode or not. As far as the joules measurement and practical application...
  8. Liquidkam

    Post a picture of your lab.

    The room is pitch dark until I mix and then it's artificial light only. I believe sunlight is the main culprit of messing up concentrates. I could be wrong about that and time will tell.
  9. Liquidkam

    Post a picture of your lab.

    I'll bet washing that dog was fun :)
  10. Liquidkam

    Post a picture of your lab.

    I just started mixing a few weeks ago and I have been slowly building up my mixing lab. I find myself wondering what others labs look like? If it's not too personal post up a picture of your mixing lab.
  11. Liquidkam

    Vape Mail and the resulting aftermath...

    I have tried various RDAs on the Mini and yes they all work wonderfully. Vaped my mutation x dry and it showed a small amount of blackening between the two of the loose wrapped Ni200 coils but no burnt taste at all and went all the way until it said "dry Atomizer no liquid". Juiced it back up...
  12. Liquidkam

    Vape Mail and the resulting aftermath...

    Thanks fellas. I have been tweaking my builds and I have gotten a couple of them working much better now.
  13. Liquidkam

    What am I doing wrong?

    Thanks! I am working with Ni200 on another device now. Found out the Kanger has an issue somewhere. I wicked the two lemos one the regular way 1 strand 9 wraps, push cotton through, and push ends down after chimeny install. It works like a champ. The other one I pulled a sheet of cotton in two...
  14. Liquidkam

    Vape Mail and the resulting aftermath...

    Just got this SX 350 mini M. It's been working beautifully sans a few issues that I am sure are user induced. First off I will tell you that the Lemo 2 that came in at the same time is Freaking awesome. I have a Kanger Sub Lemo drop and now the Lemo 2. The Lemo 2 kicks ... I the airflow...
  15. Liquidkam

    What am I doing wrong?

    Thanks. The one thing I keep going back to thinking about is how the wick is always soaked after I check it when getting a dry hit. I'm wondering how a soaked wick can produce a dry hit. Too much power is the only thing I can come up with but 25 watts isn't out of the range for .9 ohms. Maybe...
  16. Liquidkam

    What am I doing wrong?

    I have tried touching coils of 3 different sizes the one pictured being the largest. The wicking material is as you described. It's 26 gauge kanthal. In the kanger I was running touching coils .5 ohm coil simalarly wicked. Juice is 30/70 PG/VG.
  17. Liquidkam

    What am I doing wrong?

    Just some extra information yes the screws are tight and it reads fine with a multimeter from the base and the screws.
  18. Liquidkam

    What am I doing wrong?

    Lemo drop. Keep getting dry hits with it on a DT-100 box set to 25 watts. The DT-100 reads my build at .9 ohms. I was having a dry hit issue and I watched a video that outlined the Pancake wick method. Tried my hand at it and it was going well for 2 days and just now I got a big nasty dry hit. I...
  19. Liquidkam

    How to get started with DIY?

    I get mine from wizard labs. You can buy it by the gallon there and it's not too expensive. On top of that they ship international for free when you order over $65 worth of goods from them. Good company.
  20. Liquidkam

    Evic customer service NON EXISTENT!

    I contacted MVS and they told me that the Evic supreme has been discontinued. Can't say that I am surprised by that seeing how fast these companies are pushing out new devices. They will no longer offer support for the Evic and offered me a 50% store credit. That is fair in my book and I took...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu