Search results

  1. dirtydog2008

    SmokTech RSST Genesis Rebuildable Atomizer

    is the neg post wire suppose to glow i heard it is because it has a insulater the rest of the coil is glowing except that need help THANKS
  2. dirtydog2008

    SmokTech RSST Genesis Rebuildable Atomizer

    Just made a 1.0 ohm coil 30 kanthal oxidized 500 ss mesh wick on the RSST but the neg lead on the coil glows is that normal
  3. dirtydog2008

    Sweetener

    i am new to diy juices can you add sweetner or sour favoring to vendor bought juices when received if not sweet or sour enough
  4. dirtydog2008

    SmokTech RSST Genesis Rebuildable Atomizer

    i was wondering if you were able to do the pulse oxidize method using the rsst on a regulated mod because of the insulater in the rsst
  5. dirtydog2008

    SmokTech RSST Genesis Rebuildable Atomizer

    has anybody seen any SmokTech RSST in stock check 10 place's and there out
  6. dirtydog2008

    top cap air hole too big

    I made a bad move I drilled my aga-t2 top cap air hole out to 1.9mm airy draw instead of 1.5mm Now i am trying to find a safe way to seal the hole and start a new hole on other side of the top cap any suggestion
  7. dirtydog2008

    Evic Atomizer Short

    I put the DID and the aga-t2 on the evic and it said atomizer short but when i put them on the lambo 4.0 it read 0.8 ohms what is the lowest ohm atomizer you can put on the Evic
  8. dirtydog2008

    Best stainless steel mesh

    here's the video about the 200 mesh conquering the genesis atomizer with 200 ss mesh - YouTube
  9. dirtydog2008

    Best stainless steel mesh

    I was thinking about trying 200 mesh from the mesh company UK heard it works really good but wanted to get people opinion and what they would pick for these juice ratio's i use 100vg and 70pg30vg juices and thx for reply's
  10. dirtydog2008

    AGA T2 Rebuildable Atomizer

    the glass tank was uneven i sanded it down and now no problems
  11. dirtydog2008

    Official DiscountVapers.com Thread

    when do you think the online store will be fully restocked because i would like to order alot and not just one or two items thanks looking forward to ordering
  12. dirtydog2008

    AGA T2 Rebuildable Atomizer parts

    grind down OD whats that 'probably something simple' thanks for the help
  13. dirtydog2008

    AGA T2 Rebuildable Atomizer parts

    does anybody know where to get a replacement aga t2 postive post threads are messed up from the tiny nuts
  14. dirtydog2008

    AGA T2 Rebuildable Atomizer

    how can you check the glass tube to see if its uneven
  15. dirtydog2008

    AGA T2 Rebuildable Atomizer

    it's the clear gasket that goes in the bottom of the tank and the glass sits on top of it
  16. dirtydog2008

    AGA T2 Rebuildable Atomizer

    i changed the gasket and its still seeping juice
  17. dirtydog2008

    AGA T2 Glass Blues

    IBTANKED.com sells them 2.5mm Wall or 1.8mm wall 22.7mm Length
  18. dirtydog2008

    where do you store your stuff

    Kitchen Cabinet
  19. dirtydog2008

    AGA T2 Rebuildable Atomizer

    i have a aga t2 with glass tank but between the glass and the base wall juice is seeping out don't know why but everything is tight The rubber gasket is in the bottom of tank and the fill screw is out has anybody heard or had this problem before thanks
  20. dirtydog2008

    Ss mesh wicking

    I know this question has probably been asked already but here goes. I have a AGA T2 and having problems with mesh wicking 100vg juice. Here is everything i have tryed 400 and 500 mesh , solid and tube,dual wicks grain going vertical , wicks with silica and cotton in center , tight and loose...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu