Search results

  1. Hitmetwice

    New coil - much less vapor produced.

    The naughty kit comes with 1.6 ohm and 1.8 ohm coils, a minimal difference but still should be noted as on will take slightly less power than the other. Go to utube and type in the device you want to learn about before use. Cheers.
  2. Hitmetwice

    New coil - much less vapor produced.

    Only need to watch the first 3 minutes.
  3. Hitmetwice

    New coil - much less vapor produced.

    By prime, do you mean simply activating it and releasing the button? No, that will ruin the coil. Prime by dripping liquid in the center area around the coil to soak the cotton before applying any power to it.
  4. Hitmetwice

    New coil - much less vapor produced.

    Are your connections clean and dry? Was the inside of the base cleaned and dried when you were changing coils? Did you prime the coil with 5 or 6 drops of liquid before re-assembling the tank? Is the battery fully charged? Cheers.
  5. Hitmetwice

    Cleito tank leaking

    Doubt it is the PG, been using 80-100% in everything since way back with narry a problem. I'd wager a missing seal or 2 or some cotton in the coil has been burnt away causing juice to flow through. My 2 cents, no change back please.
  6. Hitmetwice

    First Try at DIY and Throat Hit Hurts

    Haha, I am someone who uses 80-100% PG for subbing at 0.5 and less works great for me. 400-500 degrees 40-50 watts. Personally I'd let the mixes breathe and steep a week or 2 before drawing conclusions and making any decisions on future changes/purchases, but that's just me. Cheers
  7. Hitmetwice

    Need advice: Presa-TC100W!

    Seem to go through spurts where it kicks out of SS TC into power mode. Seems to do it no matter what I do. Reset, remove replace the tank, unlock and relock resistance, replace coil, nothing seems to help keep it in TC. At least when it switches to power mode it does so at only 20 watts. I...
  8. Hitmetwice

    Ecig tank getting hot ?

    I believe a ceramic 0.5 coil comes in the kit from the factory. The replacements you purchased may not be the newer ceramics.
  9. Hitmetwice

    Ecig tank getting hot ?

    A search popped up this video in the first post. Haven't watched it yet. Problem with Kanger Protank 4 Every device has it's limitations. You may have found the PT 4's.
  10. Hitmetwice

    Ecig tank getting hot ?

    65 watts seems rather high, putting that much power to the tank will def heat it up. Running it at 30-45 watts should give you a great vape. You may need another set-up to spread the heat around. Overusing or overheating a device will lead to other troubles. YMMV.
  11. Hitmetwice

    Hello

    This is what I had to do within days of starting vaping as something in the liquid did not agree with me. Vaped only plain VG one day and then plain PG the next. I soon discovered the culprit was VG. I had my last smoke over 3 years ago now. It cost me all of 15-16 bucks to eliminate the...
  12. Hitmetwice

    Ego-C twist charging!!!

    I'm pretty sure you'll be fine with that. Just monitor for any excessive heat build-up the first time or 2 you use it. Any time you notice excessive heat anywhere be safe and unplug it. The device draws the required current it needs to charge, if the device is demanding 1 amp through a 500mah...
  13. Hitmetwice

    DIY organic is it possible?

    Sounds like your wife may have a sensitivity to scents/perfumes etc., it is not uncommon. Many workplaces and venues have scent free policies in place. You may want to look into liquid with a higher PG content. It produces less vapour and requires less flavouring. If the scent is the issue with...
  14. Hitmetwice

    DIY organic is it possible?

    Yes, it is very cost effective to DIY. Aside from less expense it was required that I do it in the beginning as I had a sensitivity to something in the juices I had. I needed to pinpoint the problem ingredient. Vaped straight VG first for a day then straight PG the next day, no flavours or nic...
  15. Hitmetwice

    Prices and supporting local business

    A well done new shop opened in our town a few months ago. Beautiful frosted glass storefront with their name engraved artfully on it. Very nice built in showcase window boxes with accent lighting built in flush on the walls to display products. A beautiful flavour bar top made out of some very...
  16. Hitmetwice

    Coil

    Same here. 45 right now.
  17. Hitmetwice

    Cleito tank questions

    Generally, I think lower heat will produce better flavour. Also you could put another device in your rotation to share the load. Alternatively a higher nic level might cause you to get your nic fix sooner. Cheers.
  18. Hitmetwice

    Branded wires

    Use 24g SS, lower wattage 35-50, thin liquid high in PG 85%+, minimal flavouring 2 or 3%(DIY), using Rayon wick helps for longevity also. If you notice the shoulder of the wick, the part just before it enters the coil, gets darker than the rest of the wick. It is due to partly vapourized liquid...
  19. Hitmetwice

    Branded wires

    Buying in bulk is much cheaper. UD is around 4-7 bucks (around here) for 30 meters. The larger spools are 10-20 for 500' I could be wrong. If I wanted a large selection of different types and gauges to try I would not even consider a large spool of each as the entire spool(s) would be wasted if...
  20. Hitmetwice

    Vapergate smurf

    They kill 7 smurfs for each bottle made. Didn't you know you're supporting smurf killers? It's probably a joke, don't take the label seriously. imo. Cheers.
View older results
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu