Search results
-
Single coil, or Dual coil?
Hai 5x stoopiD :D Lol, just pullin your chain of course but got a good chuckle from your post so did The Mrs. Love seein these comments because its the same way we feel. Get down to the economics of things and thats just the way it gonna be for a product of this caliber. Believe me we have... -
Question for IB Tanked Pros
I think we have pretty much covered from the smallest to the larges with a couple options in between. If we were to do another size it would likely be very large like 30mm. There is a very small segment for this size though at this time. If the popularity of 26650 devices took off then it might... -
Question about flared ring
Not at all Ed, I ddnt even realize the threads were a press fit. Send a note in asking for a replacement or put it in the notes on a future order. This is the first time I have heard of this so thanks for bringing it up. -
Do you fiddle with your thingy?
The tracking number should have been sent to you when the label was printed. It is also put into your order updates which you can check by logging into your account and drilling sown a little. I dont remember the exact steps offhand and it seems when I looked before it was a little tricksy. I... -
Do you fiddle with your thingy?
There is no tracking outside of the us through USPS. I believe if you track using the same number on your carrier if I understand how it works anyhow. -
Do you fiddle with your thingy?
Haha... just remind him of all the cigarettes you didnt smoke ;) -
-
Question about liquid level
I have never had any trouble with the washers. We toss in the extra oring because we always have, even before we had the washers made. Folks like getting extras you know ;) Honestly though I have changed orings in only one of my tanks and once in my Brothers in over two years and both of those... -
Question about liquid level
Yup, you do it a couple of times and you will remember even when distracted ;) Yes it is funny, changing a cartomizer is really quite easy and they are about as cheap as things get when amortized over many days use. I do prefer the vape I get from a fresh one too, wouldnt consider myself an... -
Question about liquid level
As long as you can push them in fairly straight and give a little twist to get them through the oring you shouldnt have any trouble. The tool certainly makes it almost impossible to make a mistake. Once you get used to the tanked cartomizers most times it will give you fair warning on when it... -
Question about liquid level
I have vaped that same size tank down to nothing, and I mean absolutely nothing left in the tank so i dont think there are any issues there. My figuring is that surface attraction keeps drawing the liquid along the inside of the tank towards the holes when it gets low. I do top up if I am... -
OOS 22mm Caps Update
The 22 Stainless are supposed to ship Monday so I would say by mid week. We are making some changes on how we order so hopefully we will be able to keep a little better handle on the low stock items. Our offerings cover such a wide gamut that it makes it tough to always be in stock on... -
It's Here!
Looks like it was made for that wrap :D I did pass along your kind words to The Mrs. -
I made the plunge
Might need to check your spam folder as you should have gotten an email when the status was updated. I got the tracking out of the order and will PM it to you. -
Another "got my first IBTanked" thread
Thanks, we certainly take pride in what we make and the price point we are able to provide it at. Some things are out of our control like the IBTipsy pricing. Would have loved to have been able to get those down from $9.00 but just no way to do it. All taken together though that tank of yours... -
Need help!
If you got the refilling drip tip you can use that to lower the cartomizer enough to get the holes outside of the tank. Then you can blow it clear or vape it like that since that tip is still sticking out enough. I would vape it dry myself taking care not to lay it down while the top of the... -
Do you fiddle with your thingy?
Can the center pin in those be lowered? I made these tall to actually pull the cartomizer down some so everything snugs up well so those devices where the threads are fixed into place kind of sets a tight tolerance on just how high a ring needs to be in order to snug down just as contact is made... -
Out of Stock Cartomizers Update
There are no stoopid questions in my book. We structured our pricing to make it as easy as possible to own and use glass tanks. -
Ordered tank last Saturday
Just got back word from The Offspring, she looked it up and it was shipped though your tracking was never updated to your account so the email was never sent out. Tracking says it was delivered to a community mailbox on the 19th. Since she did not update the tracking we are going to still send... -
Ordered tank last Saturday
Possibly Litcube, honestly I dont know why it got lost but it will go out today. My apologies on the delay.