Search results

  1. spraintz

    From Newb to Beyond...

    Provari (there, for search purposes ;) ) An "Atomized Cartridge" or cartomizer is designed to be used on it's own. It has a coil and the filler matial in it and you fill it up and vape till it's close to empty and fill again. For many this would not last very long and were tired of re-filling...
  2. spraintz

    Phoenix rebuildable atomizer (clone)

    weak vapor production is most likely due to the air hole being in front of one of the posts once the cap is screwed on. One suggestion is to put a lil bit bigger o-ring (a drip tip o-ring works nicely) on the base so you can position the air hole in between the posts(aiming right at the coil)...
  3. spraintz

    New Kid is frustrated with vaping

    I started out with this: Phoenix Rebuildable Atomizer - Clone Dude, $9.....I mean c'mon, it just doesn't get any cheaper than that to get started in the rebuilding scene. :tongue: This atomizer is great for learning coils on. It is a dripping type rebuildable but the "juice well" holds like...
  4. spraintz

    Choices of Rebuildable Atomizers

    I found mine on the classifieds, brand new, unused with every option part including the "Ghost Protocol" tank parts for $110. A buddy of mine was also interested and found him one on the same classifieds used with all parts except the clear ghost tank for $65. Just post a wanted ad, I bet you...
  5. spraintz

    New Kid is frustrated with vaping

    I would say you have a pretty dang good jump on the game if you have only been at it for a few months. I can say with near certainty the with more time you will find a setup/combination that is reliable, repeatable and "just works". This does, however, come with a price. You will have to gut...
  6. spraintz

    I joined the club...

    Right on!! Yere gonna be super happy with it, congratz!!
  7. spraintz

    Smallest VV with replaceable battery

    just a suggestion, Puresmoker Legacy Mini with extension and a Kick. Not exactly VV but with the Kick is VW with some regulation and protection. Having some issues with the photobucket but the total size of the Legacy min, extension, 18350 and a kick is 3.5", it's pretty dang small;) Size of...
  8. spraintz

    smallest diameter mod?

    Keep lookin for this one, it is a super small, super tuff, super nice mod that is friggin tiny. I got my woman one and she is in heaven. I would suggest doing whatever you can to get "varified" and check out the clasifeds section. This forum has one of the fastest moving classifieds sections...
  9. spraintz

    Prodigy is discontinued

    Hmmm, Wonder why the Puresmoker products don't have quite the following that they should :( I was using a prodigy V3 withe the V3.1 upgrade for over 2 years and took it to hell and back and to me it was the greatest thing ever. I ended up getting into rebuilable atomizers and recently upgraded...
  10. spraintz

    bump evertime you buy something new...

    Sapphire Cherry Vapes Ming (I liked the SS so much I had to get the blue one) PureSmoker Legacy mini (my "I gotta throw it in my pocket cause I'm gonna go do some stupid stuff mod" ;)) enjoy:
  11. spraintz

    DIY inexpensive rubber Provari protective grip.

    dunno if yer using a rebuilable but here is a suggestion: Resistance Heater Wire,Kanthal A-1,36 AWG 0.005": Amazon.com: Industrial & Scientific
  12. spraintz

    Calling all Provarites.....

    Just got this SS ming drip tip for my GTUS. I know it's nothing special but it's my first of this style tip and I really like the feel of it!! It also looks pretty sweet in SS on the GTUS. Will prolly be getting a blue acrylic one for when I'm using my "case" ;) one of many places for drip...
  13. spraintz

    DIY inexpensive rubber Provari protective grip.

    If you have a Fry's Electronic near you then you can get the 1" heat shrink tubing in 3-4 foot lengths in different colors for about $4 FRYS.com | THE I was up there today and had Provari in hand and it slid in the 1" tubing just fine, should shrink down perfectly. I chose the motorcycle grip...
  14. spraintz

    Mechanical Mod Recommendations

    I just got a Puresmoker Legacy mini off the classifieds. I sold my older Puresmoker Prodigy V3 once I got my Provari and as much as I love the Provari I did miss my trusty Prodigy. Not sure why more people don't recommend the Puresmoker mods but I will tell you this from my experience, I used...
  15. spraintz

    bump evertime you buy something new...

    Got a stainless steel ming style drip tip to match my GTUS:
  16. spraintz

    G-Tank-US-CO-OP Support Thread - Part 2

    I usually like my coils at 3.3ohm -ish or higher and anywhere between 5.3 and 6v. Problem seemed that 36g wire seemed to thin and always had way too red a "tail" at the POS post and cooked. Tried out some 32 and and it took soooo many wraps to get a resistance I liked that the whole atty would...
  17. spraintz

    G-Tank-US-CO-OP Support Thread - Part 2

    Hey all crazy atomizer mad scientists, I am still loving the ole G-Tank US and I think I have found my good setup. I have become pretty decent and oxidizing a wick and have ended up using this method (sans cotton part, I never really get any shorts): GTUS build with Mesh/Cotton hybrid wick -...
  18. spraintz

    Resistance Wire - Kanthal/Nichrome

    :toast: Right on, I figured it would be hard to beat that price.
  19. spraintz

    Phoenix Rebuildable Atomizer

    some mesh if what ya got doesn't work out: Woven Wire Mesh Stainless Steel 400 Mesh Filtration 12"X12" US Stock LH | eBay
  20. spraintz

    Kanthal Wire

    kinda depends on yer battery voltage, everybody has their "sweet spot". 3.7v maybe start at the 1.8 - 2.2 ohm range, 6v prolly 3ohm or higer. If you have a vv device it makes it a bit easier to experiment with and adjust voltage if you made yer coil a lil too high/low resistance. Be careful...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu