Search results

  1. tchavei

    DNA 200 Watt

    :( I would contact Evolv asap. It's not a bunch wiki smart guys (me included) that can help you out at this time as I don't think this is common to happen. Let us know how it plays out for you. Good luck Regards Tony Sent from my keyboard through my phone or something like that.
  2. tchavei

    SXmini M Class (TEMP CONTROL)

    It might not even be a bug. It might just be the TCR that throws everything off. Nickel TCR curve is curved and ti is basically linear. Many books refer to ti TCR as being 0.0038, others say 0.0042 and zivipf Ti is 0.0035 Now imagine some yihi engineer used some wire thru had available with a...
  3. tchavei

    Joyetech Evic VT 60 Watt

    You don't need to make sure the coil is wet. It will still regulate in ni mode. You just need to set the temperature lower... 185C = 240 C Regards Tony Sent from my keyboard through my phone or something like that.
  4. tchavei

    Titanium wires

    I don't think it's vague... "contact Ti coils will be sub sub ohm " I ask why? A 7 wrap ti coil is around 0.4 ohm... Is that considered 'sub sub ohm'? Nickel has half the resistance of Ti so is nickel" sub sub sub sub ohm"? Yes. Ti has lower resistance than kanthal but higher than nickel...
  5. tchavei

    DNA 200 Watt

    We use grade 5 for surgical applications... You can't say grade x is better than grade y. It all depends on the application. Of course you can remove o2 from ti but not by vacuum annealing. Which is what they say they are doing. It's like if svoemesto would say it buys 317 steel and then...
  6. tchavei

    DNA 200 Watt

    Here the link Titanium wire, vaping and safety | Page 83 | E-Cigarette Forum (edit: correct link to message posted) Regards Tony Sent from my keyboard through my phone or something like that.
  7. tchavei

    DNA 200 Watt

    In an email they sent to a customer, they state they start with grade 2 and then do some magic stuff to make it better than grade 1. Unfortunately, the special annealing process they mention is scientifically impossible to use to remove oxygen from titanium. The email was posted on the...
  8. tchavei

    DNA 200 Watt

    Just so you know, you're vaping on grade 2 Ti. Nothing wrong with that, just keep an eye on the coil and dump it as soon as you can see a titanium dioxide layer. Grade 2 produces much more easily TiO2 because of the extra oxygen contamination. Regards Tony Sent from my keyboard through my...
  9. tchavei

    SXmini M Class (TEMP CONTROL)

    I have a suspicion regarding the Ti curves I see on my evic VT and, apparently on the sx mini (which I don't own). Both mods seem to be way off, requiring a much higher set temperature than what they are actually firing at. The only way to justify that is if both companies used a wire with...
  10. tchavei

    Titanium wires

    Why? Regards Tony Sent from my keyboard through my phone or something like that.
  11. tchavei

    DNA 200 Watt

    Understood [emoji106] Regards Tony Sent from my keyboard through my phone or something like that.
  12. tchavei

    DNA 200 Watt

    Yes you can solder the leads directly to the board. Last one for me is the positive... Some prefer ground. It doesn't matter really. Regards Tony Sent from my keyboard through my phone or something like that.
  13. tchavei

    DNA 200 Watt

    You're talking about the 3d box on shapeway? How does the screen hold in place on that box btw? Regards Tony Sent from my keyboard through my phone or something like that.
  14. tchavei

    DNA 200 Watt

    I don't see this ending well. I'm sorry. I have no doubts you have good intentions but epoxy on the board? The board will power up without the balance leads if you program it for power supply in escribe but I wouldn't recommend it with a lipo pack. You'll run into serious trouble if you do it...
  15. tchavei

    DNA 200 Watt

    Sorry to hear that. Building a mod is not about saving money. You won't. Like was said before, it's the satisfaction to have something you made yourself although, sometimes, you think you would be rather off buying a pre made mod (been there, done that) If you want to change your mind about...
  16. tchavei

    DNA 200 Watt

    Err... With the appropriate iron, there should be no problem... Someone soldered the wires to the lipo tabs in the first place... You can't get any closer than that Right? They are soldered, not welded btw in case someone is wondering... Regards Tony Sent from my keyboard through my...
  17. tchavei

    Rayon wick, better flow, flavor, saturation and Nic Hit!

    :) I'm watching my back. Last rewick was done on June, 12th I think... At 6ml per day, it's about 200ml right now. Have no idea how the wick / coil looks. I haven't opened it since... Just fill and vape :) Regards Tony Ps: I'm cheating too although on a evic VT so it's not too much...
  18. tchavei

    I'm thinkin' maybe we should try this again? . . . . and you kids should behave yourselves

    Merkel wants a 4th Reich and she's gonna get it. Regards Tony Sent from my keyboard through my phone or something like that.
  19. tchavei

    DNA 200 Watt

    But it works...? Just set it to 185C and vape away :) Regards Tony Sent from my keyboard through my phone or something like that.
  20. tchavei

    DNA 200 Watt

    Mine says (or will say): :) Regards Tony Sent from my keyboard through my phone or something like that.
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu