Search results

  1. comptechltd

    Resistance-No Resistance wire welder

    Did you get your box at digikey? If so which one? Steve
  2. comptechltd

    Terminator/Nautilus/Choddy/Oddy Clone Pics, Tip,Tricks and Quirks

    Yes. see the pic in my previous post. Steve
  3. comptechltd

    Terminator/Nautilus/Choddy/Oddy Clone Pics, Tip,Tricks and Quirks

    In other words, O-ring number 7 is removed. Number 8 is left in place.
  4. comptechltd

    Terminator/Nautilus/Choddy/Oddy Clone Pics, Tip,Tricks and Quirks

    The o-ring between the tank and top is removed. The o-ring between the top and the mouthpiece collar is left in place.
  5. comptechltd

    Terminator/Nautilus/Choddy/Oddy Clone Pics, Tip,Tricks and Quirks

    I agree. But doing it the way I do you can leave the top collar tight and don't have to worry about loosening it from time to time.
  6. comptechltd

    Resistance-No Resistance wire welder

    I read on breaktru's forum that these clips didn't hold very tight. He recommended getting the standard filled ones and filling them with solder. Steve
  7. comptechltd

    Resistance-No Resistance wire welder

    Sweet!!!!!
  8. comptechltd

    Terminator/Nautilus/Choddy/Oddy Clone Pics, Tip,Tricks and Quirks

    I will have to say that my initial experiences with the Terminator wasn't great. I have experience with RBA's but never owned an Ody basically because the were never available. I have however had a Penelope since they were first released and absolutely love it. When I first tried the...
  9. comptechltd

    Resistance-No Resistance wire welder

    I just got in most of my parts so I sure would appreciate a step by step guide. I think I have the basics but any help would be great. Steve
  10. comptechltd

    Terminator Clear Tank

    I bought a clear tank from another vendor that may be 'more' compatible but I haven't tried it yet with any cinnamon or citrus. Steve
  11. comptechltd

    Terminator Clear Tank

    I don't think so. I believe I read where they are polycarbonate. You might be able to replace it with a 3rd party clear that would work. Ody tanks will fit. Steve
  12. comptechltd

    Is there going to be a V2 Terminator???

    Thanks Cloud
  13. comptechltd

    rba that can be laid on it's side

    Another vote for Penelope and Terminator. My criteria was being able to lay on its side or be in a pocket. Penelope is by far the best if you can find them. Never ever had a leak from laying it down or leaving it standing up and I've been using it since it came out non stop all day every day...
  14. comptechltd

    Resistance-No Resistance wire welder

    I second that. This stuff goes in cycles. I bought my silver wire (quite a bit) when everyone was saying how silver was by far the best (better than nickel) and you had to use kanthal over nichrome. Things change. Steve
  15. comptechltd

    Resistance-No Resistance wire welder

    gsa, What would need to be the rating of a momentary switch on one of the leads to the wire?? Steve
  16. comptechltd

    Is there going to be a V2 Terminator???

    Has anyone heard?? Will they be releasing V2 innards for the Terminator. I would buy the Ody innards but can't find any anywhere. Steve
  17. comptechltd

    Terminator RA Tank

    Anything new on this?? Steve
  18. comptechltd

    Resistance-No Resistance wire welder

    I have my parts ordered to make gsa's welding box or at least attempt it. Wouldn't it be possible to place an additional momentary switch maybe going to one of the leads so that you could charge up the cap., position your wires so they are touching in a "helping hands" soldering type clamp and...
  19. comptechltd

    Terminator RA Tank

    I'm not sure what you are trying to keep apart. Inside the ceramic is where the Positive post inserts from below the metal ceramic holder and the ceramic. Then a nut screws onto the post from inside the ceramic. This assembly screws into the Terminator base. After secured in the Terminator...
  20. comptechltd

    Resistance-No Resistance wire welder

    That's why I'm going to try to build this. I have a pretty good knowledge of electricity and good mechanical aptitude but very very basic in electronics. As long as I have someone to 'show me the way' I'll trod through. Steve
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu