Search results

  1. Ezkill

    The iHybrid APV - A fully Customizable Genesis

    Surprisingly you can taste the juice at insane wattage levels, the flavor certainly changes but it's not burned as long as the juice supply keeps up with the heat. I keep a lot of the stuff I do off the board for a good reason. Seems anytime someone says "This is awesome..." a bunch of people...
  2. Ezkill

    The iHybrid APV - A fully Customizable Genesis

    Yea, I kind of left that one alone, lol. One will drain faster then the other....due to capacity. Eventually the 26650 will try to "charge" the 26500 due to different voltage levels and bad things can happen. Kind of wish people that do that didn't make videos of them doing it. Some things are...
  3. Ezkill

    The iHybrid APV - A fully Customizable Genesis

    60 AMP MNKE's ...I have a feeling that's what you'll be using, lol. Roll .1 ohm 42 AMP coil from 22 gauge kanthal and vape hard :D
  4. Ezkill

    The iHybrid APV - A fully Customizable Genesis

    Should be nice...I get almost 2 days of vaping on my 26650 pit hammer with a single MNKE 26650, lol. Meanwhile I go through 2, 18650's a day. The voltage drop is just so slow on the 26650's that you can vape them forever. They also don't fade under load so you're still firing at almost the...
  5. Ezkill

    The iHybrid APV - A fully Customizable Genesis

    I think he's talking about the picture of the extra parts bag with the allen wrench. The HR didn't come with an allen wrench...because the negative screw is a phillips head instead of an allen key like all my other iHy's. Open draw is also a phillips head and tight draw is a an allen key/thumb...
  6. Ezkill

    The iHybrid APV - A fully Customizable Genesis

    Ahhh...yea you didn't change the spring to the stiffer one that came with it...I always wondered why. The second spring that comes with the caravelas still leaves a soft throw but you can stand them up in 18650 mode with a big heavy atomizer and they won't fire or wobble.
  7. Ezkill

    The iHybrid APV - A fully Customizable Genesis

    I was doing that for a while...at the end got annoyed that it wouldn't stand without locking and put it back on a Caravela.
  8. Ezkill

    The iHybrid APV - A fully Customizable Genesis

    You need a re-threader ring from the GG stealth, Russ. The top tube of the GGTS is a male thread. Top tube of the Chi is a female thread. Unfortunately they are extremely hard to come by. I can snap a picture of the ones I have if you want to see what they look like.
  9. Ezkill

    The iHybrid APV - A fully Customizable Genesis

    Nope...you're absolutely correct. No loss whatsoever...it's a completely different chemical reaction when it anodizes.
  10. Ezkill

    The iHybrid APV - A fully Customizable Genesis

    It's fine, it's a little too slow for some atomizers with some coils. 635 has smaller holes so the capillary pressure is greater and it will wick higher then 200, but for my purposes I needed speed.
  11. Ezkill

    The iHybrid APV - A fully Customizable Genesis

    Lame.........Damn you VA :)
  12. Ezkill

    The iHybrid APV - A fully Customizable Genesis

    I have to say this 200 mesh is impressive, I know everyone goes up in mesh numbers, but wow...does this wick fast.
  13. Ezkill

    The iHybrid APV - A fully Customizable Genesis

    Oh hmmmm.... This is a good thing... Can we send her to stalk blue foxes?
  14. Ezkill

    The iHybrid APV - A fully Customizable Genesis

    Oh those c-clips. They are hard to find, I actually went looking for a replacement one a while ago of that size and could not find one. I'm no help here as I could not locate a spare. The brass or metal is best sanded lightly and then cleaned with ISO. These are contacts so just 99% won't get...
  15. Ezkill

    The iHybrid APV - A fully Customizable Genesis

    The only other size that I know of is the 26650 MNKE and RTD carries those. I have a pipe that uses them and they are beyond impressive. Barely any voltage drop under load and they last for two days of vaping. 60 AMP max discharge. Fantastic. Last time I looked MNKE does not make anything...
  16. Ezkill

    The iHybrid APV - A fully Customizable Genesis

    Yes Ma'am, she says Maya and Z-Brush...that's what everyone uses.
  17. Ezkill

    The iHybrid APV - A fully Customizable Genesis

    Well if you ever need some help getting into game design, or need some advice you know who to come talk to.
  18. Ezkill

    The iHybrid APV - A fully Customizable Genesis

    Not, not really. But if it's a standard you can easily make it happen with a little sand paper if it bothers you. Alternatively you can also use a clear o ring between the tank and tube if you don't want to sand. On the new LE's the engravings on the tank and tubes line up, but the wick hole...
  19. Ezkill

    The iHybrid APV - A fully Customizable Genesis

    Yes, yes they are... Mine only has 813 rear wheel horse power(not at the transmission, rear wheel) and I can still crank up the boost. It's been modified a little. My friend takes much better pictures then I do, this is one of my cars, but not a picture I took personally. I can make anything...
  20. Ezkill

    The iHybrid APV - A fully Customizable Genesis

    Keep it simple to start. Mixing PG/VG, cutting nic, making custom blends...turns a lot of people off to start. I used to vape 24mg 60VG/40PG. So I buy 24mg 70VG/30PG base. After I add 10-20% flavor I end up with 20-22MG and 54-63% VG since the flavoring knocks down the percentages. Believe...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu