Search results
-
The Next Big thing.... Porous Ceramic Wicks
Would have been yes. But a friend sent me about a foot of ribbon wire so I took off the 30g and wrapped up the ribbon. That was around 3 weeks ago maybe.- Bmays
- Post #4,818
- Forum: Modding - Handcrafted Gear
-
The Next Big thing.... Porous Ceramic Wicks
Good thing....2 months of daily use with the same wick, never even takin out of the tank. If it was bad, I'd be screwed:tongue:- Bmays
- Post #4,813
- Forum: Modding - Handcrafted Gear
-
Sigelei Mechnical Mods
Ah, thanks. I missed that one altogether some how. Sent from my DROIDX using Tapatalk 2 -
Sigelei Mechnical Mods
EH pro shipwreck?? Enlighten me please. You'll probably like the #19. Its top notch IMO. Sent from my DROIDX using Tapatalk 2 -
Sigelei Mechnical Mods
Heres how I fixed a busted one of mine.... Brass Screw, Spring from a printer. The spring is a little stiffer than then original and it is working >>>> So far <<<<:D -
Sigelei Mechnical Mods
That's the major flaw of the #20. The spring/pin connection looks like (see Below) If the spring does not return to full vertical and disconnect from the atomizer pin the mod will fire at full or low voltage. I would not use it anymore until you looked into it and or modded it some way. -
Sigelei Mechnical Mods
Thanks for those. The Mod looks decent, However they avoided the actual switch shot I see. -
Sigelei Mechnical Mods
Looks like its in 18350 mode to me. I like the looks of it but really want to see what they have going on with that side button. EDIT: On second thought, It looks like a new design of this Not sure I like the setup there. -
-
Virginia Roll Call
My offer is still good if you can meet me in crozet, its right outside of cville and I make all my own juices (tobacco flavor), Low nic though. More than willing to give you a 15ml pre steeped mix.- Bmays
- Post #415
- Forum: General Vaping Discussion
-
Virginia Roll Call
I could meet you in crozet with some juice later this afternoon / evening. Do you do tobacco flavors?? Sent from my MILESTONE3 using Tapatalk 2- Bmays
- Post #403
- Forum: General Vaping Discussion
-
Sigelei Mechnical Mods
They sold out for round 1, Round 2 has already started. I assume the refund was to bump into round 2??? But, I'm the procrastinator and still cant decide if I should jump or not:unsure: -
Sigelei #19 Tips, tricks, and DON'Ts
Though I've not polished mine I would think ridding the machining marks would eliminate the noise. I don't mind it myself....Nails on a chalkboard on the other hand I would mind:blink: -
-
Sigelei Mechnical Mods
I would personally look for a two part epoxy that would bond multiple materials. Sent from my DROIDX using Tapatalk 2 -
The Next Big thing.... Porous Ceramic Wicks
I can almost promises that the dizzy feeling is not a direct result of the SS mesh. Probably more so your getting a higher level of nic using the mesh setup.- Bmays
- Post #4,737
- Forum: Modding - Handcrafted Gear
-
Sigelei Mechnical Mods
Gummy Bare, I did use a drill press and tapped the brass portion like a lot of other folks. If you don't have the taps etc, You could drill a hole as strait as you can, and buy some brass wood screws of a slightly larger diameter. You should be able to drive one in without threads that way but... -
Sigelei #19 Tips, tricks, and DON'Ts
Just clearing that up. That actually is not whats happening. You can see my post here that explains the contact points. The contact points are not the side of the switch rather the top of the actual button. -
Sigelei Mechnical Mods
Basic Stuff Really. Here is my bottom bottom with brass pan head screw as the battery connection. However, I would like to address a misconception on the switch problem. Its been said that the side of the switch needs to make contact and the tolerances were too great. That is not the... -
Sigelei Mechnical Mods
I was actually dreading the shipment of my #19 after all I had read about magnet this, switch that etc. However, I have modded mine with all brass battery contacts and It will not be leaving my rotation anytime soon. It is truly the best mechanical to leave China thus far IMO.