Search results

  1. shynsly

    Steeping Times and an Ultrasonic Cleaner Part III

    Here is what i did to my basket to raise it from the bottom (cable ties & #12 ga. solid wire for handles). I also used cable ties to keep the basket flat as it tends to bend from the heat and the weight of the bottles. I also just started using a small tupperware container with the bottom cut...
  2. shynsly

    New Calculator to try

    I have been using e juice me up since i have been doing DIY, and I am looking forward to start using this calculator now. After looking at all the features you have and the simplicity of the interface it looks Fantastic! I will give you more input once i have used it. Thank You Hotrod for...
  3. shynsly

    vaping at the in-laws

    pocket one and hit the bathroom...the one with an exhaust fan especially if you are clouding....:laugh: and go flavorless if you worry about smell!
  4. shynsly

    Hot water steeping question re: bottle size?

    yes what you are saying makes sense, but i would recommend using glass, preferably amber or cobalt to keep the light from the juice. Also look into the thread on using a ultrasonic cleaner too speed up the steeping process...
  5. shynsly

    Do You Use Various Cream Flavors & What Are The Better Ones

    I would recommend checking this out and making sure the flavors you buy do not contain this as it could cause you health problems. Just my :2c: I like TPA Bavarian Cream myself. Perfumer's Apprentice Good Luck! DIY is Great!
  6. shynsly

    Center pin issue

    well most ego batts i have had you only need to tighten them just snug, they dont need to be too tight. But if its a new batt, then maybe there is a problem. I would contact the vendor right away to see if they can help or exchange it. Good Luck!
  7. shynsly

    So confused, help! ordering in a hour or two. MODS and RBA, whats a mesh for?

    Get the vamo, as i have been very happy with it, and perfect for a beginner. Get some protanks or evods first and some extra heads, then you can learn to rebuild those before you move up to RBA''s. Just my :2c:
  8. shynsly

    Are the mini protanks 2 ok?

    I have been rebuilding the protank heads and the evod head with no problem, am currently doing micro coils with cotton and its the best i have had so far for this type of clearo. I have no experience with the i clears, but if they are similar to the viva novas top coils then you should be able...
  9. shynsly

    Keep Burning my Protank II Mini (cotton)

    First thing you should invest in is a multi meter to check what your ohms are as your are just guessing, and you say you batt is not lasting as long, so it may be putting out more volts than you think. Knowing these two things are essential to figuring out the problem. Anything burnt usually...
  10. shynsly

    Are these compatible???

    The vison is good, you might want a larger battery like a 900mah, they usually come with a charger. As far as they t3s, i would recommend a kanger evod as i have had better luck with them. get some replacement heads for the evod or t3s, they should be 2.0-2.5 ohms heads. and then you just need...
  11. shynsly

    New to vaping, would like a recommendation

    Hey Phinz, congrats on kicking the analogs! You didnt say what model of PV you have, so hard to tell you what to go to. But I started with joyetech ego's and now I am using a Vamo. The Vamo has VV & VW, and uses replaceable batts. But it is much larger than the ego stick batteries. As far as the...
  12. shynsly

    Protank 2 Rebuild trouble!!

    what device are they on?
  13. shynsly

    Newbie, any suggestions on starter devices?

    try a vamo, VV/VW, Ohm meter....cant beat them for the price. Congrats and Good Luck on Your New Adventure!!! :toast:
  14. shynsly

    New Vaper

    Congrats Lurch! And what you have will work great, but try the evods or other kanger products. :toast:
  15. shynsly

    Citrus e-juice vs. my Mini Protank atomizer base

    well if it was me i would be kinda scared of that juice period if it took plating off..........jus my :2c:
  16. shynsly

    VaporBeast - Win the Innokin iTaste VTR

    Rats 222 taken, so change to 437 tie breaker-VTR Holster
  17. shynsly

    VaporBeast - Win the Innokin iTaste VTR

    Liked on FB too do lets try 469
  18. shynsly

    VaporBeast - Win the Innokin iTaste VTR

    222 please and Thank You!
  19. shynsly

    DIY - pure flavour

    Are you heating, & steeping in glass? I wouldnt be microwaving plastic under any circumstances.. just my :2c: From the time you describe it sounds like you are not letting it steep enough. I steep in my ultrasonic for at least 12 - 45 min. cycles, and open up the caps to let it breathe in...
  20. shynsly

    Another NOOB gives up the analogs and finds ECF!

    congrats... just dive in head first... it wont hurt and you are helpin yourself!! just my :2c: Just read n learn!
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu