Search results

  1. PONKAW

    Anybody else see the new Vuse ad yet?

    They must have the exact chemical break down of their new e liquid...right... Good luck ever finding out whats in it... but I bet there are more ingredients than there needs to be.
  2. PONKAW

    Provari Mini.... or nah?

    Seglei 20 or 30W. With the 18500 tube. Great mod that will give you avery good non pwm vape . Use this inil the P3s get going and prices stabilize.
  3. PONKAW

    Long Time Dipper Needs Advice

    Hi Whiskey... welcome to the board!! I Have used Copenhagen for over 30 years (I'm 46) Snuff is a hard nut to crack. I actually smoked and dipped for more than a decade in the military. Dip useres have a higher tolerance for nicotine than average smokers. So for decent equipment to start with...
  4. PONKAW

    Kayfun lite 2 leaking

    Try building a micro coil. You can re-use it for weeks or months and just replace the wick as needed. When you wrap the coil on the wick and then install there is a good chance the cotton is dumping juice down the air hole. If you build the coil by it's self it is much easier to modulate the...
  5. PONKAW

    Kayfun lite 2 leaking

    Make sure the chimney seal (small oring in the bottom of the cap) is there and not damaged... it's what keeps the whole chamber sealed and the vacuum from releasing juice.
  6. PONKAW

    Hana modz dna30 v3 clone from fasttech

    The mini lipo version (by hotcig) is even better than the full size IMO. (I have both) Took 40 something days to get it though. Luckily it has been basically flawless with a kayfun 3.1 for a couple of months now.
  7. PONKAW

    Can I freeze this nicotine from MFS

    Did you order it in glass? I ordered a liter from MFS and had to transfer it to glass. But yea... use a good ziplock back and put it in a part of the freezer that will be undisturbed. (I also put my own label on it describing the contents and its potential dangers in case some one not familiar...
  8. PONKAW

    HELP! All 3 of My Batteries Died in One Night

    How many chargers do you have?
  9. PONKAW

    Advise on an at work setup

    I have been using this exact set up for two months now... in fact I have a black vv3 / black mini and a silver vv3 /silver mini i use in rotation. The minis are a little quirky to fill but otherwise, build it like you do your full-size kfun. It is tad longish (around 8 1/2 in) but feels balanced...
  10. PONKAW

    Magma Clone

    I'm not that big on RDAs... I have several: Helios, TOBH, Nimbus... But I have had the FT Copper Magma for a couple of weeks now and... For me it is just amazing. Every thing was straight, holes etc, and nothing loose. Very easy to build and the airflow is just fine for me (I like the middle...
  11. PONKAW

    Hcigar Kayfun Problems

    You can back the center-post (the slotted screw) in and out on most 3.1s. It is adjustable. I sometimes have issues with my MVP and 3.1s... the screw gets a little loose over time and the pad on the MVPs 510 connection just turns the screw in. back the 3.1s screw about 3 turns out and put it...
  12. PONKAW

    Looking for starter mech mod suggestions!

    If your just wanting to get your toes wet... This thing looks like its to cool for school, and won't break your bank. Mini Nemy with Mini Kayfun package. I have two of the Ivogo KF minis and they work great after you dial them in. $33.70 IVOGO Kayfun Mini V2.1 ES Style RTA + Nemi Nemesis Style...
  13. PONKAW

    KFL+ Fill Screw O Rings? Where to get?

    Just a note: I have found that the DANCO brand orings found at Lowes and HD will expand quite a bit if using citrus or cinnamon vapes. If you can find the size you need in millimeters the seals at fasttech work quite well are very cheap and don't seem to "swell" (Just an example...not the ones...
  14. PONKAW

    What would you include?

    I think it's a great idea too. One of my local shops has a vape bar. They use cheap carto tanks and have several spinners on hand. They also have a bowl with sanitizer to clean drip tips... but I think you could get away with buying a bulk bag of cheap hard plastic throw-aways. I would have 2...
  15. PONKAW

    Kayfun Mini Diminished Performance

    Good to hear... It really is a great (and cheap) piece of gear once you get the build down. I'm surprised more vapers don't try them.
  16. PONKAW

    Any help would be awesome

    Hi Granny... Pro tank heads can vary on quality a lot. that being said... It sounds like you should start with a lighter (as in color, darker juices funk coils quickly) juice with a bit more VG and up the nic content one notch (ie; 12mg to 18 mg) On a spinner normally I find a 1.8 or 2.0 ohm...
  17. PONKAW

    Kayfun Mini Diminished Performance

    With the KF-mini I keep about the same build as a normal 3.1. Make sure your coil/wick is 1-2 mm above the air hole. If the wick is even barely touching the the bottom air hole the e-juice will find a way to the outside. every time (and I mean every time) you re-fill you have to tip it upside...
  18. PONKAW

    Problems with Evod

    You may want to either decrease the ohms of the coils you use or increase the voltage to 4.1-4.2 volts. This will create a quicker heating time on the coil and provide a warmer vape with less gurgling and eliquid escaping. No matter what you use an occasional splash of ejuice is going to...
  19. PONKAW

    Button covers

    This is the reason I sold my REO years ago... two months after I sold it someone started selling the "button covers"... Go figure. :facepalm:
  20. PONKAW

    Cigarette like e-liquid ??

    Purecig from Freedom Smoke usa. I haven't had any for a while, but its a pretty good simulation for cigarette flavor.
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu