Search results
-
B
By Leo : Attys, mods, Drip-tips, tanks [CLOSED}
The top looks OK from that angle. Check if the plastic set is firmly in place and it is not wobbly with the pole inside. On the pole you need only check the top of the pole (where it connects with your atty) to make sure it is smooth. Sent from my GT-I9505G using Tapatalk- Billie-cig
- Post #13,424
- Forum: Closed Unregistered Supplier Threads
-
B
By Leo : Attys, mods, Drip-tips, tanks [CLOSED}
It's the only way I know where they don't appear tiny Sent from my GT-I9505G using Tapatalk- Billie-cig
- Post #13,422
- Forum: Closed Unregistered Supplier Threads
-
B
By Leo : Attys, mods, Drip-tips, tanks [CLOSED}
Hello! You can try removing the side screws and then turn the top part of the MECHA and reassemble. Also check the top of the pole to see if there is any inconsistency on the surface. If everything is ok there, the only thing left is the plastic set. We are low on stock, but send me a PM if this...- Billie-cig
- Post #13,419
- Forum: Closed Unregistered Supplier Threads
-
B
By Leo : Attys, mods, Drip-tips, tanks [CLOSED}
They are not in the store as accessories, but if you need anything PM me and we will send you whatever you need :)- Billie-cig
- Post #13,416
- Forum: Closed Unregistered Supplier Threads
-
B
By Leo, monthly give-away
The winner for this month's giveaway is : NeoGoldenBoy Congratulations!- Billie-cig
- Post #6
- Forum: Closed Unregistered Supplier Threads
-
B
By Leo : Attys, mods, Drip-tips, tanks [CLOSED}
All versions of the Calix are now in stock :)- Billie-cig
- Post #13,414
- Forum: Closed Unregistered Supplier Threads
-
B
By Leo : Attys, mods, Drip-tips, tanks [CLOSED}
We will start with the 510 base with side air intake and move on from there. :)- Billie-cig
- Post #13,413
- Forum: Closed Unregistered Supplier Threads
-
B
By Leo : Attys, mods, Drip-tips, tanks [CLOSED}
I don't know the dimensions of the KF to say if it will fit but I will put it up on the site tomorrow with all its dimensions.- Billie-cig
- Post #13,410
- Forum: Closed Unregistered Supplier Threads
-
B
By Leo : Attys, mods, Drip-tips, tanks [CLOSED}
The caged sleeve is very resilient, but I did forget to say that a plexi or PMMA sleeve will come out as well :)- Billie-cig
- Post #13,407
- Forum: Closed Unregistered Supplier Threads
-
B
By Leo : Attys, mods, Drip-tips, tanks [CLOSED}
We will first release the other designs for the Cage sleeve for the Calix (after we finish with the rings for the quartz tubes, which will take a few days). Then a new product will come out as we finalize the P3 base and side air intake base for the Calix. After that we will release the new...- Billie-cig
- Post #13,404
- Forum: Closed Unregistered Supplier Threads
-
B
By Leo : Attys, mods, Drip-tips, tanks [CLOSED}
On September, when everything opens up again, there is a whole "repertoire" of products and accessories that will come out. I wish we could do them right away :( Today was the last day the CnC was open and we barely made it in time to finish the new batch of Calix (except from some rings for...- Billie-cig
- Post #13,402
- Forum: Closed Unregistered Supplier Threads
-
B
By Leo : Attys, mods, Drip-tips, tanks [CLOSED}
The Apollo bottom feeding airless pin is now in stock :)- Billie-cig
- Post #13,400
- Forum: Closed Unregistered Supplier Threads
-
B
By Leo : Attys, mods, Drip-tips, tanks [CLOSED}
Yeap, still the same message "Sorry, you do not have the permission to create new tag. Please use existing tags only" I'll ask again- Billie-cig
- Post #13,395
- Forum: Closed Unregistered Supplier Threads
-
B
By Leo : Attys, mods, Drip-tips, tanks [CLOSED}
That's why I said "too complicated to remember". I couldn't understand the reason why I couldn't add tags to the thread. I also remembered that the edit tab wasn't letting me input any tags of my own, but since the site has changed I will try again :)- Billie-cig
- Post #13,394
- Forum: Closed Unregistered Supplier Threads
-
B
By Leo : Attys, mods, Drip-tips, tanks [CLOSED}
Yes and they told me that I couldn't change the tags and that they are automatically added in a way that it is too complicated to remember >.<- Billie-cig
- Post #13,391
- Forum: Closed Unregistered Supplier Threads
-
B
By Leo, monthly give-away
Just a PM. We will start with the posting method next month, as it seems to be the standard procedure :)- Billie-cig
- Post #5
- Forum: Closed Unregistered Supplier Threads
-
B
By Leo : Attys, mods, Drip-tips, tanks [CLOSED}
It will be in stock in a few days. I am waiting for the engraver to finish writing the bases and chambers. I will post the re-stock as soon as it happens :)- Billie-cig
- Post #13,386
- Forum: Closed Unregistered Supplier Threads
-
B
By Leo : Attys, mods, Drip-tips, tanks [CLOSED}
Of course, here you go :) By Leo, monthly give-away | E-Cigarette Forum- Billie-cig
- Post #13,382
- Forum: Closed Unregistered Supplier Threads
-
B
By Leo, monthly give-away
For this month's drawing, we are giving away a STR Beck tip line (STR10, STR15, STR20) PM me to be included. Have a great month! :D- Billie-cig
- Post #2
- Forum: Closed Unregistered Supplier Threads
-
B
By Leo, monthly give-away
A give-away at the start of each month- Billie-cig
- Thread
- Replies: 11
- Forum: Closed Unregistered Supplier Threads