it depends on the battery you are using.that coil will draw 12-13 amps on a single battery mod. some batteries sold for use in flashlights or on e-bay would overheat. a mach mod is only limited by the battery
just ordered an I stick pico to try TC along 6ml vcmt tank from focal ecig. reviews claim that the tank work well up to 120 watts (argh!!!!!) I use 9 watts on my EK V2 and 12 watts on my subtank with a 1.2 ohm coil (rba deck) I get good cool vape with this. the only exception is with factory 0.5...
you clearly have no training in electronics. I studied electrical engineering at the university in the 70's the resistance of the human body changes with time and circumstance. skin resistance is one of the factors lie detectors measure. I just measured the resistance of my tongue and came up...
the human body has too high of a resistance to allow that kind of current flow at the 4 volts mod batteries put out. you may see people using 12 volt car batteries to shock people in the movies but thats hollywood and hollywood is not the real world.you would need less than a 0.2 ohm load to...
they are safe for people who know what they are doing but not for many of the vapers I have met. the local vape shop tells me that new FDA regulations prohibit them from rebuilding coils for their customers which was tragic for many of their customers who use sub ohm RDAs but do not know how to...
you can only test voltage and not current that way. the only way to know current capacity is from the manufacturer rating.and sometimes thats not reliable. cheap re wraps are often over rated by the sellers.
not sure what you mean by electrical potential. but I do test 9 volt batteries with my tongue. but folks that use mechanical mods use their knowledge, skill and experience to determine what is safe.
seems like a none issue.if your not sure and you have a hang up about the material than don't buy it. but I have never read anything about anyone being harmed by the material their RDA was made from.
maybe it's displaying the voltage feed to your coil.my nebox did that for the one day it actually worked before dying. I trust my knowledge and skill a lot more than I trust the technology used in regulated mods
your mod cuts of when your battery voltage drop below 3 volts. 3 volts at 50 watts = 16.7 amps and battery capacity goes down and internal resistance goes up as the battery ages. any form of sub ohming is for advanced vapers and can be dangerous. you clearly need to educate yourself to do this...
find a battery rated for 30 amps.mooch posted a lot of information on batteries and listed 2 or 3 that could safely handle 30 amps. many batteries will overheat at those levels.you need to educate yourself before engaging in that kind of extreme vaping. it is not for novice.learn what you are...
regulated mods protect themselves but do not protect batteries. if you use a low capacity battery like some of the cheap junk on ebay you can still cook the battery at high power settings on your mod. they do not sense battery temperature. make sure that you are using a battery that can safely...
I use to do the same thing before I retired. I was an over the road truck driver and I would buy cigarettes in Carolina for my friends in california the price has been a lot higher in some states for decades after 45 years of smoking i've been tobacco free for 21 month thanks to vaping. I feel...
they are pretty easy to build. this will help find coil resistance Coil wrapping and just stuff the cotton into the side channels just like on the kayfun and you will have no problems with leaks. I use 7 turns of 26awg kenthal on a 3mm form for a 1 ohm coil resistance. for sub-ohm you may want...
I get my wire and cotton on E bay the wire from this company is very good and they carry wire for Tc mods as well (titanium,nickle) temco_industrial | eBay good luck you can get cotton on e bay as well
I have had no problem with clones. I have 5 subtanks and these coils work great. I have had problems with authentic coils leaking but the fastech RBA deck has never given me a problem
kanger makes great tanks but terrible coils. the RBA deck is the only way to go with kanger tanks. I use these $7.74 Replacement RBA Coil Head for SUBTANK Mini Clearomizer (4-Pack) 4-pack - 0.5ohm at FastTech - Worldwide Free Shipping. the free shipping is very slow but I pay and extra $1...
I kicked a 45 year tobacco habit with an ego starter kit. $6.54 eGo-H5 550mAh Rechargeable Starter Kit - 2.5ohm / 2ml / 510 USB charger / zipper pouch at FastTech - Worldwide Free Shipping but something like this may work better for you and give you more flexibility $33.69 U30 2200mAh VV/VW...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.