Search results
-
Joyetech Penguin
I haven't been using mine regularly but when I do I only get a hot hit if I take two big hits back to back. Haven't changed the coil since I fluffed it and been through two tanks. I do re-prime mine every couple hits or so and it seems to be working great. Very good flavor off the .25 and...- Cheflance
- Post #257
- Forum: Vape Pod Systems
-
Cleito question
Anyone else notice that the Cleito burns through juice like a champ? Wow. The hits are awesome on my new rig but it's going to swallow juice like a whale!- Cheflance
- Post #11
- Forum: Rebuildable Atomizer Systems
-
-
Joyetech Penguin
Update ... I took out the cotton that I had put in the top and noticed that the wick on the coil was kind of dry. I DO NOT recommend using the cotton. It actually worked as a dam. Unless you press it in very firmly it just not ever going to connect well enough to the wick. I went ahead and...- Cheflance
- Post #214
- Forum: Vape Pod Systems
-
Joyetech Penguin
I was, actually, thinking that maybe the bad/dry hits were because I had worn the coil out. I'm at 3/4 of one tank to maybe 5/6 and I'm already getting harsh dry hits after say maybe 10 minutes. I just want this thing to work on the way home from work or more than only being able to use it for...- Cheflance
- Post #203
- Forum: Vape Pod Systems
-
Joyetech Penguin
So far its working great. I took a pin and fluffed it. Put some cotton in the top and pushed it until it was flush with the top of the coil opening. Didn't compact it too much and just a little cotton. I'm, also, conscious to prime it every couple hits. Halfway through a tank and no...- Cheflance
- Post #194
- Forum: Vape Pod Systems
-
Joyetech Penguin
I was thinking it was a wicking problem, also. I'll give this a try .... the throat is kind of small. My thought was that the bottom of the coil wasn't getting enough juice if you don't re-prime after every hit. The bottom dries out before the top. This solution might help.- Cheflance
- Post #190
- Forum: Vape Pod Systems
-
Joyetech Penguin
Maybe that's the problem with mine. I changed the coil like four days ago. I went through about 50 ml of juice. That doesn't seem like a lot to me. But I am used to my Aspires. They'll go through at least 60 and probably 120 - 2 bottles - before I need to change the coil.- Cheflance
- Post #187
- Forum: Vape Pod Systems
-
Joyetech Penguin
Hey all. I've had the Penguin for a couple weeks now but I'm having a terrible problem with dry burnt hits on the .25. I never let it run down on juice. I'm guessing the juice might be too thick and I don't know how to thin out but it's pretty annoying. I'm ready to give up on this thing. I...- Cheflance
- Post #185
- Forum: Vape Pod Systems
-
Sigelei 150W TC - Just got it - now what do I do
Hey all! Thanks for taking a second to read and maybe (hopefully) give me some pointers on my new box mod. I've been back and froth on quitting smoking for a while ... I've been trying to use Kanger tanks on VV Vision 2 rechargeable and just have not been satisfied enough with them as... -
Stingray Clone - Infinite or JD Tech?
Thanks for the thread. Helped me figure out what be the 'crunchy' feel in my Stingray clone. Gonna pull it apart and check it out. So glad I went with the mod - I was using the SVD and went through 2 of them. The firing buttons SUCK! I thought the first one I had went because I dropped it a... -
Mech Mod Newbie Here; First Build Questions
@jpcwon - Recommendations on a good Ohm's Law app? Dual Coil set-up - so that is going to double the Amps, also? I know that the law for resistance in parallel is 1/ohms + 1/ohms for 2 coils. But that is also doubling the Amps because it is going through 2 coils? Want to make sure I got... -
First mech mod coming today! Stingray Clone. Advice on builds and usage, please.
Looks like the Efest's I have are only 10A. So it looks like as long as I keep my resistance at 0.8 ohms or higher I should be alright. An online calculator calculated 4.625 A at 3.7V and 0.8ohms. I guess the worry would be anything below .5 ohms. Then I am doubling my Amps and getting close... -
Mech Mod Newbie Here; First Build Questions
I just posted something similar. Getting my first mech mod today, I hope, waiting for the mail. I got a Stingray clone. Similar situation and I will check your thread and if I get any advice I will repost here. Good luck and best wishes on the new setup. How do you know the amps on your... -
First mech mod coming today! Stingray Clone. Advice on builds and usage, please.
Hello everybody. I made the switch, I am leaving behind the VV/VW's for my first mech mod and am pretty excited about it. After two SVD's having problems with circuitry, couple drops and I am not gentle with things, I ordered a Stingray clone. Any advice on the builds for my attys with the... -
What is with the Mech Mods?
I've finally ordered my first mech mod and it should be coming today. Can't wait. I've really been trying to not smoke anymore but found that the cheaper and smaller devices just don't last. The eGo's I first bought won't hold a charge very long anymore and they only fit the smaller iClear... -
AQUA keeps getting dry hits! Help??
Hhmm. I'm wrapping around a #6 machine screw. 6 coils on each gave me 1 ohm resistance. Organic cotton rolled and put all the way down the channels with a little sticking out the bottom horizontal channel. Vaping like a champ on the third try. Used this link to figure the wraps: Coil...- Cheflance
- Post #11
- Forum: Rebuildable Atomizer Systems
-
Quality RBA (tanks) worth considering?
You can run the Aqua with just one coil. And you have to remember that running dual coils in parallel means that the rest of each coil is cut in half by the other coil so 2 1 ohm coils will give you a half ohm not 2 ohms. The positive and negative posts are thumbscrews versus having a screw...- Cheflance
- Post #17
- Forum: Rebuildable Atomizer Systems
-
Quality RBA (tanks) worth considering?
Just did my first builds on an Aqua clone and a Kraken clone. So far ... I'm really liking the Aqua. I have to play around with the Kraken a bit more and they are different builds - Aqua was a little harder but it is vaping like a champ. Using organic cotton and 30 gauge Kanthal in both. I...- Cheflance
- Post #5
- Forum: Rebuildable Atomizer Systems
-
nic level too high?
I was a pack a day smoker before I started vaping. I was enjoying 18mg in my Protank and just got a Kraken clone and an Aqua clone and rebuilt both coils and have the Kraken at 1.8 ohms and Aqua at 1.0 ohms. Using my SVD with 12 mg Sucker Punch in the Kraken and 12 mg Castle Long in the Aqua...