Search results

  1. forcedfuel50

    Been away from the E-cig world or a while.......can someone get me up to date?

    It's been a long time New World! Yeah, some still drip, LadyMama's been rocking the drip setup since 09' ! I think i need to bring her over to the dark side of rba's :)
  2. forcedfuel50

    Shipping Status Thread Holiday 2014

    A lot of questions about shipping, so i'd thought i'd start a thread. We got through most of the Black Friday weekend sale orders (we have about 10 left of the approximately 75 orders we received). I'll be in this weekend to finish them up. If you have tracking, it should start updating by...
  3. forcedfuel50

    Didn't want it to come to this

    First off, i want to personally apologize, it wasn't our intent at all. For the first one, our stock showed we had 3 on hand when we only had 2. It let you order because we did not have our inventory accurate and I am sorry for our mistake. On the second, as mentioned in my email, we went to...
  4. forcedfuel50

    Introducing the Precise Industrious RBA

    Yes, we made just over 50 of them and its all we intend to make, there is just no money in them. Much to the dismay of those who think US Manufacturers are making a killing, we aren't subsidized by the gov't like Chinese manufactures are. The machine times on this are just too long and that's...
  5. forcedfuel50

    Introducing the Precise Industrious RBA

    Draw is infinitely variable, so you can make it as airy or tight as you'd like. As far as resistance, that's a personal preference, but we've tested builds as low as .25ohms.
  6. forcedfuel50

    Introducing the Precise Industrious RBA

    .106 inches i.d. and about 38mm deep. Overall it measures about 24.XX (same as the ELA and Workhorse Telescopic) x 46mm
  7. forcedfuel50

    Introducing the Precise Industrious RBA

    Says the guy who's made only one post in over a year and who's never used, handled, built, seen in person or vaped it. It's sad our community has to put up with this crap. I got into this business over 5 years ago to help people get off cigarettes, yet competitors or their fan boys always have...
  8. forcedfuel50

    Introducing the Precise Industrious RBA

    Working on emails now, I'm behind a week, hopefully will be caught up by morning :-)
  9. forcedfuel50

    Introducing the Precise Industrious RBA

    To answer: -So airflow increases as the top cap is opened/loosened? Yes - Is there a recommended mesh size(number) and cotton type? Or is it just user preference? Its user preference. I'm using 500 SS mesh, but other sizes will work as well. I'm using Japanese cotton but other fillers can...
  10. forcedfuel50

    Introducing the Precise Industrious RBA

    Crosscut view showing airflow path across the coil:
  11. forcedfuel50

    Introducing the Precise Industrious RBA

    Sure, as long as you can get it all the way down in there!
  12. forcedfuel50

    Introducing the Precise Industrious RBA

    Either by removing the entire tank cap or thru a syringe (theres a syringe size hole in the tank cap).
  13. forcedfuel50

    Introducing the Precise Industrious RBA

    Yes, it replaces the entire top cap. Airflow is adjustable by turning the top cap up or down. I have a cutaway view i'll post up later this evening. Same width of the ELA and Telescopic Workhorse (24mm), Length i'll measure when I get back in this evening.
  14. forcedfuel50

    Introducing the Precise Industrious RBA

    Unfortunately, only with the ELA V1 and V2 and Workhorse Telescopic. We only made just over 50 of them, they were just too damn expensive to make due to the lengthy machine time of each unit. Just the permanent central wick takes darn near as long to machine as an entire workhorse mod!
  15. forcedfuel50

    Introducing the Precise Industrious RBA

    You're going to love it! Its so easy to setup and takes the guesswork out of coil placement into the airflow and takes full advantage of the 360 airflow as the entire wick/coil is exposed to airflow. Also, with the central wick/wire, it pushes the coil out to the edge, with no "dead" areas for...
  16. forcedfuel50

    Introducing the Precise Industrious RBA

    I can confirm you were the first! :-)
  17. forcedfuel50

    Introducing the Precise Industrious RBA

    Building is super easy (i'll have a video available soon too detailing the same steps below): 1. Cut and roll up stainless steel mesh and insert into the permanent feed/wick tube: 2. Push the mesh all the way to the bottom of the feed/wick tube: 3. Screw in feed/wick tube: 4. Screw...
  18. forcedfuel50

    Introducing the Precise Industrious RBA

    Introducing the Precise Industrious RBA featuring an innovative central "permanent" wick and vertical coil wrap. Takes the guesswork out of coil placement into the airflow providing outstanding atomization, flavor and vapor. Quick easy builds that even a first timer can master in only a few...
  19. forcedfuel50

    Check out our new website!

    Im out of them, but i'll put together some v2 bands with v2 locking rings that will work. The gap is a bit bigger, but they work and I won't charge anymore then the band itself.
  20. forcedfuel50

    Precise ELA Telescoping MOD by Super-T Manufacturing PT 2

    To clarify, the workhorse telescopic comes standard with a knurled lock ring. We do offer separately a smooth lock ring that was originally for the ELA, but it also fits the Workhorse Telescopic:-)
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu