Search results

  1. ericbnc

    looking for my first mech mod

    I picked up a stainless steel EMI Avenger clone from Desire e-cigs ($60 for free shipping) - very nice telescopic mod with copper contacts top and bottom. Only thing I didn't like was the logo on the bottom since the shape is rounded and the mod would wobble even with the lock ring set. I pulled...
  2. ericbnc

    Getting rid of the whistle on KFL+ clone

    I took out the air flow adjustment set screw on my Tobeco KFL+ clone and my whistle went away - it opened up the draw a good bit (but not too much) for me too.
  3. ericbnc

    120ml $8.99 12ml $1.99 Buy 3 Get 1 Free All Sizes Free Shipping Over $30! Lucky 7 Vapes

    Order #302 is in the house - the Berry Blast and Strawberry Sour Straw are worth the wait - haven't tried the Grape Candy or Sour Apple yet! :)
  4. ericbnc

    Stainless Steel Rocket V2 clone w/adjustable air flow ...!

    I ordered this from Desire e-cig back on January 22nd and it hit the mailbox today - 14 days from Paypal to delivery - pretty quick IMHO. The Atty is designed for top filling, which is nice. The threads are very precise through out as well. The star of the show is the knurled air flow control...
  5. ericbnc

    Amperage drop in Mech Mods

    Try pulling out the spring under the bottom firing pin (remove white delrin block first) - should help a bit. You lose the ability to fit an 18350 but 18500 and 18650 will still work fine.
  6. ericbnc

    Origin Mod Clone Switch.....What Am I Missing?

    The parts in my Origin clone switch were loose out of the box - I removed the white delrin section so I could get in there and torque everything down - over a month in and nothing has come loose yet.
  7. ericbnc

    Tobeco kayfun lite + clone. Worth it??

    Been using my Tobeco KFL+ daily for a month now - zero issues.
  8. ericbnc

    120ml $8.99 12ml $1.99 Buy 3 Get 1 Free All Sizes Free Shipping Over $30! Lucky 7 Vapes

    Order #302 shipped - thanks guys! :)
  9. ericbnc

    Best ft mech

    I have the tools to test now - out of the box the SS Magneto had a lot of voltage drop but after pulling out the spring under the bottom battery connection I get 0.15 volt drop with a 1.3 ohm atty using a 30 amp Sony.
  10. ericbnc

    The non-o-coil build

    For real - when I tested it without the cotton the entire wire was glowing red at the same time - maybe 100% hot spots = no hot spots?
  11. ericbnc

    Question about Mech mods conductivity

    I did some research and then worked out some bottlenecks. I tightened up the telescoping tube connection and removed the spring sitting under the connection making contact with the bottom of the battery. Same battery - Sony 30 amp at 4.03 volts now reads 3.88 firing a 1.3 ohm coil - the 0.15...
  12. ericbnc

    My build backfired!

    No short - I tested for it before, during, and after. I think some of the wick was under the coil and the juice on it was igniting - I moved this wick and solved the problem.
  13. ericbnc

    The non-o-coil build

    Ever build without wrapping any coils? I call this the non-o-coil. I took a little over an inch of 32g Kanthal (1.2 ohm per inch) and connected the ends to my atty posts. Next I shoved a wad of cotton between the post and the wire (so 1/2 a coil?) and dripped some juice. It works.
  14. ericbnc

    My build backfired!

    Takes throat hit to a new level. :rolleyes:
  15. ericbnc

    My build backfired!

    100% VG juice
  16. ericbnc

    The FastTech Thread for All FastTech Posts (Part 2)

    That is the one I ordered - thanks for posting the link! :)
  17. ericbnc

    The FastTech Thread for All FastTech Posts (Part 2)

    I purchased a brass Origin clone from FT - buttery threads, magnetic switch, and a low voltage drop too. for $19 it is a great little mod!
  18. ericbnc

    My build backfired!

    I built a 1.6 ohm coil from 30 gauge Kanthal I wrapped on an 18 gauge blunt needle - I pulled 2 strands of 1 mm silica wick through this coil and mounted it on my drilled out Nimbus clone dripper. I have a pipe stem I like to use instead of a drip tip - might not be important but that is what...
  19. ericbnc

    Natural Tobaccos - Part Deux

    In before page 5: Vaping Strawberry Vanilla Cake (w/extra strawberry) from Ahlusion - nice flavor! :)
  20. ericbnc

    120ml $8.99 12ml $1.99 Buy 3 Get 1 Free All Sizes Free Shipping Over $30! Lucky 7 Vapes

    Can't wait to try the Strawberry Sour Straw coming in my order - thanks!
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu