Search results

  1. Whitechapel

    Shopping List For Rebuildable RSST This Weekend

    I just received my RSST Genesis today and will be doing my first build this weekened. I have the tank, the kanthal, and the mesh, now I just need the tools. I need to know everything I need to buy. Here is what I have so far: 1. Phillips/flathead screwdriver 2. Toothpick 3. Tweezers 4...
  2. Whitechapel

    Just Got In From THY ART IS Murder (Warning: Man Capris Inside)

    Last night I texted my dude and asked if he had any interested in seeing Thy Art Is Murder tonight in Pontiac. He said hell yes. I was stoked because no one else wanted to go! Figure 1: A sign Thy Art Is Murder is Australian deathcore and they are absolutely one of the best bands I've seen...
  3. Whitechapel

    Yes sir! I got a real good deal on it, and my buddy hooked me up with a Cobra Titanium! My RSST...

    Yes sir! I got a real good deal on it, and my buddy hooked me up with a Cobra Titanium! My RSST Genesis will be here tomorrow.
  4. Whitechapel

    Cobra/ProVari Setup: Takes Like Burning!

    OK. Thanks guys. I will buy some tools at the end of the week. On the upside, my RSST Genesis will be here tomorrow!
  5. Whitechapel

    Cobra/ProVari Setup: Takes Like Burning!

    I'm back. I got past all the errors, it could of been there was still a little juice left in the tank. There is a total of 5 coils from top to bottom. 1: The weakest of the top three by a slight amount 2: Glows same as 3 3: Glows same as 2 4: Barely lights up 5: Couldn't get to glow
  6. Whitechapel

    Cobra/ProVari Setup: Takes Like Burning!

    I got to the dry firing phase of your post and now I keep getting E1 and E8 errors on the ProVari. E1 – Short Circuit / Shorted Atomizer – If this error appears, remove the atomizer and replace with a different one or lower your voltage settings The ProVari will automatically reset when the...
  7. Whitechapel

    Hey buddy! You rock!!

    Hey buddy! You rock!!
  8. Whitechapel

    Cobra/ProVari Setup: Takes Like Burning!

    So how should I go about removing the wick so I can dry fire it and check to see how it's lights up?
  9. Whitechapel

    Cobra/ProVari Setup: Takes Like Burning!

    I appreciate the side option, but I am determined to make this work! I would need to pick up some cotton, I don't have any on me at the moment. I am not objected to it, just determined. How did you make that wick?
  10. Whitechapel

    Cobra/ProVari Setup: Takes Like Burning!

    I am using 30g wire. I'm not sure if I said 32g wire somewhere else, so if I did, I apologize. We oxidized the mesh. We used a lighter, juiced it, and lit it back on fire. The guy who did it actually did your recommendation of pulsing it on a mechanical mod. Pardon my asking, but why is it...
  11. Whitechapel

    Welcome to the Party Pal

    Fantastic call! I will definitely give it a go.
  12. Whitechapel

    Cobra/ProVari Setup: Takes Like Burning!

    The errors don't happen every single fire. It usually happens with after tinkering with the wick, I just Google the error code and see what the recommend fix it. So you're saying to drain the tank, dry fire it, and see how the coil lights up?
  13. Whitechapel

    Cobra/ProVari Setup: Takes Like Burning!

    I do understand the complexities of it but I am new to all of it. I had a crash course in rebuildable tank this week. But this is how I learn best: by doing. The theoretics usually comes secondary. So once I figure this out and get it working, I know I've run into it before and can fallback on...
  14. Whitechapel

    Cobra/ProVari Setup: Takes Like Burning!

    I'm vaping a 3.5V though. I need to check on what ohm my coil is at, I'm at work right now. I do want to say it's 1.2 ohms. The tank is nearly completely full, so I believe it is saturated.
  15. Whitechapel

    Cobra/ProVari Setup: Takes Like Burning!

    I want to say it's something with the wick itself. Because I rotated it a bit, the issue went away for a couple rips, then it came back. I had a friend rebuild it a couple days ago, I just got around to ripping it today. Thanks for the Youtube link, I will check it out. Yes, this is a...
  16. Whitechapel

    Cobra/ProVari Setup: Takes Like Burning!

    I should have mentioned that earlier... I did look at the coil under light. The coil appears to have full contact with the wick. You might be onto something with the wick being faced upward instead of on the bottom when I hit it. I'll go check it out. Edit** That did not help. After about two...
  17. Whitechapel

    Cobra/ProVari Setup: Takes Like Burning!

    I'm currently using a ProVari v2 and a Cobra titanium setup. After a couple hits the tank seems to lose flavor and in comes a burning metallic taste. I've tried the ProVari from 3.5-4v (I was getting error codes on the mod when trying to vape at 4.5, it seems to be off and on) and as the voltage...
  18. Whitechapel

    Just Curious... Skin For ProVari

    Ohhhhhhh OK, good deal. So everything would be able to be done with one wrap since the Provari is very simplistic in the layout? Also if I have to see Auburn/Alabama one more time I am going to puke. It's Sunday, which means NFL not the NCAA!
  19. Whitechapel

    Just Curious... Skin For ProVari

    Wait whaaaaaaaaaaat? They aren't cutting the entire wrap out of my image??
  20. Whitechapel

    Slow loading times?

    I believe it has to do with the sheer size of the board. It's read/writing all that data constantly to recreate the pages, which drastically decreases load time.
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu