Search results

  1. BigLiquid530

    My latest AGA-T2 setup with triple cotton wicking action

    Seems like a pretty good idea might have to try that one thanks for the idea Also if you tip it on its side does it leak a lot
  2. BigLiquid530

    The Rocket RBA

    Does anyone have any tips on setting this Rba up. All I get is constant flooding. I did a micro coil with a cotton wick 28 gauge kenthal Any help would be appreciated
  3. BigLiquid530

    Can my air hole be too big and causing flavors to seem muted on my AGA-t2?

    I have an AGA-T2 and I drilled my holes to big do I filled it with JB Weld then made a smaller hole works great
  4. BigLiquid530

    SJ Sigelei Stainless Steel ZMax V2, ZMax Mini Discussion/Support/Therapy Group

    Damn I'm way off
  5. BigLiquid530

    AGA-T2 Question

    4-5 wraps When you say 10 wraps are you doing a micro coil on it
  6. BigLiquid530

    AGA-T2 Question

    I have my AGA-T2 on my Zmax Mini and its reading 0.9 ohms how would I get the ohms up. I'm assuming that's why my zmax isn't firing. Using SS mesh 500, 28 gauge kenthal
  7. BigLiquid530

    SJ Sigelei Stainless Steel ZMax V2, ZMax Mini Discussion/Support/Therapy Group

    Just got my zmax mini in the mail and wondering what is the lowest ohm rba it will fire. I'm using an AGA-T2 and the ohm is reading 0.9 using SS Wick
  8. BigLiquid530

    Five Pawns

    I'd like to get a 150ml bottle of Gambit
  9. BigLiquid530

    Building Wick Need Help

    Damn that sucks
  10. BigLiquid530

    Building Wick Need Help

    TA2OOZ Are all the coils firing right Also I'm using 500 mesh not sure I'd that makes a difference I put juice on the wick to get it primed up where the coils is a couple times see if that works also make sure your wick isn't too tight in the hole its going down that's what happened...
  11. BigLiquid530

    Building Wick Need Help

    Well so I got all the coils done right and this AGA T2 is vaping like a beast flavor is outstanding. I assuming you have to kinda prime the juice on the wick, not sure if thats the correct saying.... But anyways so far so good and thanks for all the help. Have the Russian 91% on the way so I...
  12. BigLiquid530

    Building Wick Need Help

    Well I good flavor for about 2 hits then all get a little metal taste, but then I let it sit for a min and I get flavor again and the metal taste, is that normal and I tilt as I vape
  13. BigLiquid530

    Building Wick Need Help

    Kinda curious cab you use cotton as a wick
  14. BigLiquid530

    Building Wick Need Help

    Well so far it seems to be vaping really good right now but I guess time will tell
  15. BigLiquid530

    Building Wick Need Help

    Okay ill start moving thanks
  16. BigLiquid530

    Building Wick Need Help

    I thought it goes inside out only if it was micro coils im using 4 wrap coils with the coils spead out
  17. BigLiquid530

    Building Wick Need Help

    So im firing the wick up is the coil suppose to glow from top and work its way to the bottom correct Also when I fire it up it keeps catching fire not sure if its because of all the juice splattering around or is it the coil and this is with the aga t2 cap off
  18. BigLiquid530

    Building Wick Need Help

    The washing of the mesh it's just a step I always see in vids so I just do it but I'm gonna use your steps also Is the wick suppose to be rolled super tight where there isn't a hole in the middle
  19. BigLiquid530

    Building Wick Need Help

    So right now I rolled a wick should there be a small hole down the center of the wick
  20. BigLiquid530

    Building Wick Need Help

    Thanks for the pick So should I oxidize the mesh then wash with soap and water roll it oxidize it again put some juice on it oxidize it again
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu