The "small holed" 510 is probably an eastmall atty. They redesigned them a few months ago and they won't fit on a bottom feeder pv that has a "needle" type delivery (the Alii and journeyman). Just about every other 510 works on them though. I know for a fact Joye, slb, ikenvape and Cisco 306s...
Dont debridge the IKV306, just de-wick it. Use a toothpick to pull the wick out from under the bridge and a small pair of pliers or tweezers and pull the wick out from the edge
Nice job on the review. Wait till you get that shiny new P16 and try Isaacs 306 again. That little more power makes a huge difference with these attys.
They do make 510 extensions. I know Cignot and TotallyWicked carry them. They are meant to charge egos on regular 510 chargers, but will work fine for what your trying to do. They're around $4.
Volcano's Magma attys are really a top notch product. You may have been unfortunate and gotten a dud, but it sounds like you might be flooding them. Blow it out really good, then drop 3 drops in and start over.
For the batts, I used what Ryan reccomended. The AW IMR 16340/ CR123 3.7 volts. As for attys, try and get any you may like around 2.5 ohms. They work good at the lower ranges and great upwards of 5 volts.
I second the idea of a "bigger, badder" pv from Halo. When Johnny announced his own ecig, I could have sworn it was going to be a custom painted ego/vgo. I would have picked one of those up even though I am completely sold on the bottom fed mods, strictly because it was a Halo branded pv.
As...
Sounds like a solder joint problem. Should be an easy fix. PM Kaji, I bet he can fix it with minimal effort and cost. Too nice of a mod to just "bury".
Best auto glass cleaner hands down: Stoner's Invisible Glass. Walmart carried it for like 5 dollars a can. Two passes with the spray and a wad of black&white newspaper cleans it off in a minute
It would be benificial to use the high drain/ LiMn batts in the 14500 size, since they will be able to output the current required by a LR atty. Mind you they will not last as long as a regular lion batt. I can kill a 14500 in about 4 hours using LR attys, a highdrain I can finish off in about...
Most of the SLB attys rane around 3.0 ohms. Ikenvape sells 3.5 ohm ones, but they are currently out of stock. I had no problems using genuine Joyes at 2.3ohms on 5v, so i would think the 3.0 ohms should be nice.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.