Search results

  1. Caterpiller

    Long term "vapor's tongue"

    I usually go with 65PG/35VG and 5% Distilled Water (to increase the throat hit), 12mg Nicotine.
  2. Caterpiller

    Wire gauge

    In that case I'd start with dual coil, 26g, 8 wraps, 2.5mm ID, 0.5 ohms See how you like that and go from there. :)
  3. Caterpiller

    Ohm's law...

    What's the internal diameter of your coils? I only ask is it's strange to hear about 8 wraps of 24g reading 0.2 ohms, unless you're build has a 1mm internal diameter and is dual coil? Dual Coil, 8 wraps, 24g, 1mm ID, 0.2 Ohms
  4. Caterpiller

    Long term "vapor's tongue"

    So from this very small survey, it seems most of us had VT on lower power devices, and less so when we switched to higher power builds. Hardly scientific, but interesting none the less. :)
  5. Caterpiller

    Long term "vapor's tongue"

    If I drunk any more water I'd drown :)
  6. Caterpiller

    Long term "vapor's tongue"

    I agree that some of us, myself included, seem more prone to VT. I still wonder if the low watt (7-10 watts) single coil builds I used at that time exacerbated the issue. Can I ask those that have suffered VT what builds you were vaping?
  7. Caterpiller

    Wire gauge

    From the limited information you've provided I'd suggest 26g Kanthal at around 0.4-0.5 ohms. If you let us know what Mod and what RDA, we could probably offer more advise:)
  8. Caterpiller

    New Members Posting Outside of New Members Forum!

    I notice that the New Members forum has spung a leak, and many are making their first or second posts in General Vaping Discussions! Is this a rule change or a forum glitch?
  9. Caterpiller

    Long term "vapor's tongue"

    I had a very similar experience, but found I loved unflavoured which I now DIY for pennies. When I do occasionally vape shop bought juice I find the flavours are back, not sure if this is due to giving my taste buds a break, or because I'm now vaping multi-coil builds between 25-60 watts. It's...
  10. Caterpiller

    Picture of Your Setup Part 2!

    The collection has grown some since I last posted on page 600
  11. Caterpiller

    RDA DotMod - Petri RDA v1.5 - BIG Issues!!!

    Ok, finally got round to building with the 24g Kanthal. Dual coil, 24g, 3mm ID, 6 wraps, 0.26 Ohms This is by far the best vape I've ever had! At 60w it's relatively cool, incredibly dense, thick clouds, that are full of flavour :thumbs: I could hardly believe it was the same juice, as...
  12. Caterpiller

    Will self cleaning coils and self wicking coils ever exist?

    Only $52 for 36ml of juice, and the effort required to break the tank and resupply my juice bottles. Let's hope it doesn't come to this. :(
  13. Caterpiller

    These batteries safe?

    I can't see anything wrong with those, except the asthetics o slightly wonky wraps. The important thing is the wrap is only exposing the top and bottom contact points, and the rest of the casing is covered. Those look okay from the top. What cells are they, what do you plan using them with...
  14. Caterpiller

    My glass tank fell and cracked

    I'm sorry to hear that you cracked your tank. We have all done it, several times. The shop will not replace the tank. You broke it not them. If you're lucky they may sell you some replacement glass, but it is not likely they stock it. You will be able to find a replacement glass tank for...
  15. Caterpiller

    RDA DotMod - Petri RDA v1.5 - BIG Issues!!!

    I got the Claptons installed. I used the diagonal post hole method mentioned above, it worked well. An added advantage of this, all legs go in via the inside holes, but come out via the outside holes, it makes life very easy when clipping the legs. ;) The build itself, my first with...
  16. Caterpiller

    RDA DotMod - Petri RDA v1.5 - BIG Issues!!!

    I'd think the legs would trap without issue being twisted. As for the build, single coil 0.4ohms, but the Petri is designed for dual coils, so 0.2ohms. Will be fine if you have a regulated mod you trust down to 0.2, and that can push 80 watts.
  17. Caterpiller

    How To Increase Vapor Production?

    So I see lots of posts on V=IR And talk about the decreasing importance of R with the newer high power VV/VW devices. Often posts explain that without the limits imposed by Mech's that sub-ohming is now becoming redundant, as the newer devices can push far more watts at most resistances. But...
  18. Caterpiller

    Wismec RX200 cell volatges problem

    I really don't know if the slight lack of balance you're seeing is an issue, but for comparison I can tell you that when charging my Efusion DNA200 they stay perfectly balanced. The biggest margin I've observed is 0.01v for a few seconds as one cell catches up with the other two. This is of...
  19. Caterpiller

    The "200w" questionare!

    I've now got 12 HE4's, and while I try to keep them as matched pairs, it is becoming harder to remember which pairs are older then others. Is there a way to test for the CDR amp drop as they age?
  20. Caterpiller

    RDA DotMod - Petri RDA v1.5 - BIG Issues!!!

    @Tom Forde I'll give your offer some thought, but I'd like to experiment further with the v1.5 deck before giving up on it. Also I'm in Kuala Lumpur and you're in N Jersey so effecting a swap would be problematic. I've not had time to try another build in the Petri, but picked up a pack of...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu