Search results

  1. Caterpiller

    Don't forget about Watts Law

    I'm not concerned if we are dealing with Ohms Law or Watts Law, or Power Formula. Most of this thread seems to be dealing with symantics at any rate. I understand the simple expression: VW Mod I=P/V/0.9 I'm only concerned that @Mike 586 seems to be calling into doubt the separate circuit...
  2. Caterpiller

    New Youde RTA the Bellus

    On the advise given a few pages back, I swapped out my 2.5mm ID duals for 2mm ID duals last night. This has opened up the in-chamber airflow somewhat and is a definite improvement for me. I went from: 28g, 5 wraps, 2.5mm ID, 0.5ohms To 26g, 5 wraps, 2mm ID, 0.27ohms The heatflux of these...
  3. Caterpiller

    Help with Cool Fire 4

    As the Innokin iSub takes manufactured coils, I'd suggest your issue is most likely to be flooding caused by a poor seal somewhere in the tank. Try taking it apart and check any o-rings, then putting it back together ensuring all seals are nice and snug.
  4. Caterpiller

    Picture of Your Setup Part 2!

    @Chips177 The UD Goblin Mini will only really shine as a dual coil, it's sweet spot is between 22-30 watts due to the available airflow. I personally only use 28g in this RTA between 0.7-0.5 ohms. @petrotech - I completely agree, I love the G-mini. Another fantastic modern RTA, with more...
  5. Caterpiller

    just tried these recently

    Half expected this thread to be about these: Sorry, I couldn't resist @Phillip Morrison -san :p
  6. Caterpiller

    Don't forget about Watts Law

    Help out a layman here @Mike 586 After reading twelve pages of this thread (and else where on ECF) saying that in a VW Mod the battery doesn't see the resistance of the coil as it's on a different circuit (and so amp draw is our only concern), are you now saying this is wrong? That it's one...
  7. Caterpiller

    Help with Dripper recommendations Please :) ?

    Is that a picture of the clone @edyle ? I notice that the two screws holding down the insulator are cross heads (Philips) where on the original they are smaller hex screws, and the post hole screws are also completly wrong and don't have the side walls with grooves. Also the post holes seem to...
  8. Caterpiller

    Help with Dripper recommendations Please :) ?

    The Petri by DotMod has one of those. Deep juice wells. No spitting. No leaking. Perfectly balanced un-adjustable air flow (IMO), is a lovely design and beautifully engineered. I did have some trouble using thinner wire at first, until I realised that threading it diagonally through the post...
  9. Caterpiller

    Chest Burn Issues

    @Fallynn Knivez You have way too much wicking material in that picture. I've no idea if that's related to the issues you're having with your chest, but I would expect that build to spit liquid into your month and be an unpleasant vape.
  10. Caterpiller

    Having an odd problem with the dripper I bought today.

    If I understand you correctly, you are saying when you push the RDA side cover over the atty, the side cover makes contact with the top of your Mod, and you get strange resistance readings? I hope someone with a better understanding of Mod circuits can come in here, but in my limited...
  11. Caterpiller

    My 5 fav Mods from low to high Watt (w/ product spec + online coupon)

    @david_1934 Thank you for this, I'm often in the market for new Mod's, and it can be confusing. I'd never looked at it that way, you set it out so well. Some people give advise that ca be so ambiguous as to be confusing, but when I read your three point plan it really helped. Particularly...
  12. Caterpiller

    New Youde RTA the Bellus

    @xlpservices I'd go with horizontals on the Bellus. It's a great RTA and I personally don't see any great advantage to be had with verticals. I've got a vertical setup in my Aromamiser to counter the indirect airflow, but with the Bellus I'd go with horizontals.
  13. Caterpiller

    New Youde RTA the Bellus

    It's a great RTA, I've not used another RTA since buying the Bellus, which is saying something as I've got several other great RTA's that were in my rotation. I'll be buying at least one more of these.
  14. Caterpiller

    Is vaping more dangerous than we think?

    Yes, I was concerned that three people all were saying 100'000mg per litre and I was going to disagree, but in my mind it was 100mg/Litre, if I'd stopped to think about it, that could never of been a 10% concentration. When Rossum piped in to correct me I knew I was going to be wrong :facepalm...
  15. Caterpiller

    Is vaping more dangerous than we think?

    I stand corrected. I got it wrong, and was working to 100mg/Litre, when you are all correct at 100mg/ml. My bad :oops:
  16. Caterpiller

    Is vaping more dangerous than we think?

    Actually a 100mg litre bottle of Nicotine Base has 100mg of nicotine in it. It's 100mg\per litre and therefore at 10% concentration. Taxed at one cent per mg of nicotine, a 15ml bottle of 12mg juice would be taxed at 0.18 of a cent. 12mg/Litre of nicotine = 1.2% nicotine. 1.2% of 15ml =...
  17. Caterpiller

    Lost Vape EFusion DNA200

    I don't think there is any carbon fibre, I assumed the panels were carbon fibre effect stickers. I'd hope that Lost Vape could sell you some replacement stickers. Have you tried contacting them?
  18. Caterpiller

    Battery Venting Question

    If the vent holes were on the top it would vent directly into your face if you happened to be vaping at the time. Bottom vent holes are a good compromise :)
  19. Caterpiller

    Please help me to choose the best RTA/RBA Tank Kit !

    @tieuphieu I think you've got too much cotton in there. The wicks look too heavy, are holding too much juice, causing spitting. Also running a coil without enough power will increase spitting, try less wicking and slightly higher power.
  20. Caterpiller

    Vapor Flask

    OK. Mine are both original VF DNA 40's, not the VaperShark Vaper Flask DNA 40. I've held the VS VF DNA40 in the store, and it seemed quite nice, but I wouldn't call it as high quality. The VF SX350J has been out for several months now. Again like the VS VF DNA 40 this is a Chinese manufactured...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu