Search results
-
RDA Focusecig Hobbit
As of yet, I've not had a problem which required me to communicate with them after an order, now I'm kind of wishing I had! -
Anyone try Charlie Noble?
Charlie has good stuff, Before DIY, I bought sometimes four 30ml bottles of Charlie Noble every week, Commodore Pearry, Treasure Island, Blue Bay and Tripoli. Now that I've got some of these figured out for DIY though I've not purchased juice in many months. Here's the Original Charlie Noble... -
PSA: Cherry Bomber mech box mod is just that.. A bomb. Do not use.
So this entire PSA thread was started by someone who hasn't owned, or personally attempted to short the atomizer with one installed? REALLY!? I'm honestly quite curious now, since there are multiple people jumping in on this...Of the people in here who are stating how dangerous it is, who... -
PSA: Cherry Bomber mech box mod is just that.. A bomb. Do not use.
You can fire a bottom switch tube mod with the switch removed entirely just by shorting the outside tube to the battery negative with something as simple as a house key... almost every bottom switch mechanical tube mod made can be fired this way, as you're simply completing the circuit. By your... -
RDA Kennedy RDA Center Post
The center post is a one piece design, it is press fit from the bottom. -
Are there Tanks that work at around 0.1ohms?
Buy this and tell me if it works, haha. $26.06 Authentic UD Goblin Mini RTA Rebuildable Tank Atomizer - 3ml / stainless steel + glass / 22mm dia. at FastTech - Worldwide Free Shipping IMO it looks like it may have enough airflow to cool ~0.1 builds and I'm curious since my daily build is 0.12...- Froth
- Post #2
- Forum: Rebuildable Atomizer Systems
-
RDA List your current top three drippers
I'm not a fan of the V2, the deck holds less juice and I don't like basically anything about the design of the deck. Yes the V1 does have a shallow deck but if you use the glass top cap(I do) you can see where the juice level is in regards to the air holes, and it makes it very easy to tell... -
Cloud Chasing
I will direct you to; He won $6,000 for first place, just for blowing clouds. There's more competitions like this going on and they're growing in popularity with large purses, I've seen as much as $15,000 offered so there's a definite following, as they're able to generate enough entry fees...- Froth
- Post #32
- Forum: General Vaping Discussion
-
RDA Need help finding a specific Kennedy RDA clone
If you want the centered deck you're going to have to buy it from Steve's website Home of the Kennedy RDA there are no centered deck clones available. The closest you can get is the Focal version of the competition which has the properly machined deck and a stainless steel dragon cap, but it's... -
A look at various wicking materials for rebuildable atomizers
Now please add the Rayon variant of that Graham!! Love it so far!! you're going above and beyond for sure.- Froth
- Post #58
- Forum: Wick and Wire
-
How Many Bottles of eLiquid?
I DIY everything, I've got five flavors down well enough to keep in rotation. You and me would get along, haha.- Froth
- Post #16
- Forum: General Vaping Discussion
-
Anyone had chest pains from vaping?
I've been blowing large clouds for over a year and I run all of my daily setups at over 100W(Around 500-550mW/mm², for those who use heat flux) and I notice zero heavy lung feeling, and this is with juice 80VG/20PG or higher in VG. Perhaps I've become used to it over time, but I'm pretty much...- Froth
- Post #6
- Forum: General Vaping Discussion
-
RDA List your current top three drippers
I'm also going to change my top 3 due to recent acquisitions, so... 1. Kennedy Centered with Gremlin cap - The most airflow I have ever experienced without muting flavor AT ALL, 10/10 will buy more for sure. 2. Kennedy Original w/ original cap - Excellent airflow and flavor preservation, 9/10... -
RDA The Kennedy
Yes it is, the drip tip also has no O-ring so it's a straight shot right through it, the O-ring is in the cap and I can confirm right now that regular 510 drip tips do still fit in there. -
Ohm Meter to the 100th
The page states "1% precise" so I'm going to have to assume that means within 1%, there is a 100 milliohm test resistor built in to the board, so you can check accuracy while it is installed in your meter. For the money, it's real nice.- Froth
- Post #15
- Forum: Batteries and Chargers
-
Ohm Meter to the 100th
What you want is THIS: Half Ohm milliohm adapter | Tech-thing electronics design Inserts into any normal DMM with normal jack spacing, check the video out.- Froth
- Post #13
- Forum: Batteries and Chargers
-
Best 75+ watt mod with an internal battery & best sub ohm tank for bigger clouds?
I'm not aware of a single box that goes to 75W+ that has internally chargeable batteries, nearly all of the devices in the 75-150W range have batteries that come out to be charged. Personally, I would suggest you get used to changing batteries if you're looking for a 75W+ device, as the... -
RDA The Kennedy
The first generation original Kennedy has left justified holes in the deck, then a few months later the centered deck, which some now call the gremlin deck was introduced. I've got two of the left justified decks, so that's why you're seeing it differently. For the centered version I build and... -
Contacts polishing (fine polish for brass or copper)
Good tip, I've been using the same old worn out can of Nevr-Dull for going on ten years, I could use a change of pace. -
Fruit Circles or Fruit Circles with Milk
Silly rabbit was a newer addition that I had not stumbled on until recently, it's a different take on a cereal flavor for sure, has more of a candied taste to me. Be careful with Berry crunch, it can overpower lighter flavors if you're not careful, I don't really use it over 3% in anything for...- Froth
- Post #4
- Forum: DIY E-Liquid