Search results

  1. MistBusterMatt

    ePipeMods Fully Custom Made Wood E-Pipes - Part 2

    And here is the rest of the regular size pipes for tomorrow's release.
  2. MistBusterMatt

    ePipeMods Fully Custom Made Wood E-Pipes - Part 2

    Here is the first half of the regular sized pipes in tomorrow's release.
  3. MistBusterMatt

    ePipeMods Fully Custom Made Wood E-Pipes - Part 2

    Here are the rest of the 18500 pics for Friday's release. Included are 2 Mac Ebony pipes and a new style - The Silly Cybin!
  4. MistBusterMatt

    ePipeMods Fully Custom Made Wood E-Pipes - Part 2

    And goings on.... Gonna hafta stop making Gandalf's I guess, since we're running out of names. Time to start the mythical creature line. Coming soon, C'thulu
  5. MistBusterMatt

    ePipeMods Fully Custom Made Wood E-Pipes - Part 2

    All of the 18500's are mine.
  6. MistBusterMatt

    ePipeMods Fully Custom Made Wood E-Pipes - Part 2

    And I thought you were a fan.... Pshhhhh.... :D
  7. MistBusterMatt

    ePipeMods Fully Custom Made Wood E-Pipes - Part 2

    It would appear that omniscients was not included in the powers granted to The Great Namer of Things... I would say that there are either two Alatars, or Pallando is wearing a cloak of disguise. I will defer to the wisdom and judgement of The Great Loader of Pipes, Katie.
  8. MistBusterMatt

    ePipeMods Fully Custom Made Wood E-Pipes - Part 2

    don't kick yourself too hard. that pipe is Resin Burl not Amboyna. Still a gorgeous piece though. The second pipe is Padauk (which is a close cousin to Amboyna).
  9. MistBusterMatt

    ePipeMods Fully Custom Made Wood E-Pipes - Part 2

    I'll get em sorted :)
  10. MistBusterMatt

    ePipeMods Fully Custom Made Wood E-Pipes - Part 2

    Oh and that last pinch has a removable copper tank sleeve. That's the upright shank you see.
  11. MistBusterMatt

    ePipeMods Fully Custom Made Wood E-Pipes - Part 2

    I might do a short run of wardens for the brass... I personally have to turn each tenon by hand on those though. And without the universal the tenons may easily snap if dropped or knocked around. I turned this one specifically for this pipe because a Gandalf needs a warden and the brass looks so...
  12. MistBusterMatt

    ePipeMods Fully Custom Made Wood E-Pipes - Part 2

    Sounds like a problem with the kick then.
  13. MistBusterMatt

    ePipeMods Fully Custom Made Wood E-Pipes - Part 2

    Indeed Alatar:blink:
  14. MistBusterMatt

    ePipeMods Fully Custom Made Wood E-Pipes - Part 2

    Ok I think I remember how to check this... Set your meter to ohms and place one lead on the center post and one on the outer threaded bit. If there is any resistance reading, typically .2-.3 then there is a short. Do this on both sides of the extender. one side can be shorted while the other...
  15. MistBusterMatt

    ePipeMods Fully Custom Made Wood E-Pipes - Part 2

    Wait this may be wrong.. It's late and I may be totally off on this. I don't have any stuff here to figure it out either. I'll have to do some tests tomorrow and see how to go about this.
  16. MistBusterMatt

    ePipeMods Fully Custom Made Wood E-Pipes - Part 2

    I have finally made a Gandalf for myself! It's not a great photo, but this is a gorgeous spalted tamarind double horned Gandalf.
  17. MistBusterMatt

    ePipeMods Fully Custom Made Wood E-Pipes - Part 2

    I will let the great namer of things decide on that. "The Great Namer of Things" being you of course :)
  18. MistBusterMatt

    ePipeMods Fully Custom Made Wood E-Pipes - Part 2

    Ohm meter, positive posts on either side of the extender. If the ohm meter reads nothing you're good. If it reads .2-.3 the extender is shorted. Also check it for a voltage load through the device. Sometimes the tiny wire inside can pop loose, especially if your trying to push a lot of current...
  19. MistBusterMatt

    ePipeMods Fully Custom Made Wood E-Pipes - Part 2

    Back to the kick issue... Are you using an extender in the jazz? If so check it for shorts.
  20. MistBusterMatt

    ePipeMods Fully Custom Made Wood E-Pipes - Part 2

    The blue wizard is blue dyed maple. It's the first pipe I turned in the new shop, I used maple just in case I didn't quite have my bearings. But the pipe turned out quite nice if I do say so myself
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu