Search results

  1. caesar

    Nose Hair Trimmer 5v 510 mod

    Looks good! Way to go. I'd put a speaker in there to mimic the hair trimming sound just to make it stealth ;)
  2. caesar

    901 adapter to fit a RN4081 atomizer?

    Have not seen them sold but you can make your own from two dead 901 attys. Dismantle them, use the tube from one, connect the center post and push the second connector on the other end.
  3. caesar

    Replacement for nichrome coil...

    With current atties, when you take a draw, small droplets of e-liquid are drawn from the metallic wool through the hole in the center of the ceramic pot on to the hot nichrome wire. If the nichrome or any other heating element would be pooled with liquid, it wouldn't have the necessary heating...
  4. caesar

    "I saw, I liked, I machined, I vaped"

    Excellent, it looks perfect. Already drooling here! I'm going to find a shop that will do it for me or I'm going to get all the tools to make it myself! :D Just a small request: could you pretty please post the switch part opened?
  5. caesar

    An idea I'd be milling over...

    I've seen a discussion on the forums about this material. Try a search for organza, it should reveal that thread.
  6. caesar

    anyone want to hazard a guess? to ecig models?

    My guess: top is a dse103 cheap copy bottom is a e-heath e-crappy Shove them in a drawer and never look back.
  7. caesar

    The rebuilt juice box

    Very nicely done! Congratulations Carlos!
  8. caesar

    My take on a copper mod (18650, rechargeable in place)

    Black is a bit dull, so now it looks like this: Pop those spray cans and let your imagination be free! PS: remember to protect it with some varnish after the paintjob.
  9. caesar

    Does using carts with filler reduce atty life? Dripping extend?

    Keeping the atty always wet extends its life, whether using filler or dripping. Puffing carts dry, or not dripping enough kills them.
  10. caesar

    3.7V Batteries charger question?

    It works, just not practical for anything larger than a 10400. Count on 3-5 hours charge time for a 10400, 9-15 hours for a 14450, 27-45 hours for a 18650.
  11. caesar

    Oh boy I probably shouldn't havent looked in here...

    It's way better and safer to use a 6V power supply and wire the attys in parallel rather then using 12V and wiring them serially. If one dies slowly on 12V (serial connection) it will suck the life of the other one too. Look after a 3A (minimum) switching power supply to cope with atty...
  12. caesar

    801 battery disassembling ?

    I use a copper pipe cutter to cut the tube 1cm down from the connector then some sharp tools to split along the last cm of tube and the connector will remain untouched. My first was opened using Shreck's suggestion, then used the above mentioned method.
  13. caesar

    Soldering SOT23's is fun!

    RIP mosfets, ESD is a *****. Don't wear anything that can charge you electrostatic while handling them. ESD protected soldering station is also a must. Pretty nice light effect!
  14. caesar

    My take on a copper mod (18650, rechargeable in place)

    Added a few more pictures in the first post! Please don't comment on my matte black paint as I lack those skills :D or at least be gentle.
  15. caesar

    My take on a copper mod (18650, rechargeable in place)

    Pipe is 22mm in diameter with a 1mm wall thikness, so inner diameter is around 20mm. Protected 18650 batts are a little thicker then 18mm so there is around 1mm space. That's why I called it my take on a copper mod :D There are many variations, this is just one of them. I like small buttons...
  16. caesar

    My take on a copper mod (18650, rechargeable in place)

    Thanks for the kind words. I just hope more people will be able to do this at home, it's relly easy. Besides the parts list I've used a drill and a soldering iron. You can use any USB charger sold for normal e-cigs also, just couple it with a manual battery adapter so you'll be able to screw...
  17. caesar

    My take on a copper mod (18650, rechargeable in place)

    Yes, silver solder just tried it. It was a new battery, never charged and lasted 5 hours without a drop in vapor production, then I let it charge overnight. A 900mAh lasts me for 10ml of juice so this one should be good for at least 20ml. I prefer counting in ml then in hours as everyone vapes...
  18. caesar

    My take on a copper mod (18650, rechargeable in place)

    This is not for sale, I am just showing that using some copper pipe and paper to fix the parts in place anyone can throw a big battery mod together. Just passed a store that had all those nice copper pipe fittings and thought why not? And the monster was born: Li-Ion, 2200mA, 18650 type...
  19. caesar

    Modder's Printed Circuit Board

    I just got the PCB's I've ordered 2 hours ago. If there is interest in just the PCB or complete soldered PCB then I think I have to register as a supplier, right?
  20. caesar

    Hacksaw meets the Screwdriver

    Crash, I have your back with a dremel! Interesting, the black and red 18650 and 14500 from DX don't blow and the protection survives when shorted indefinitely. Tested myself when I forgot my multimeter on amps and tried to check the voltage :shock: Using a mosfet to drive the circuit is cheap...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu